THIS IS A TEST INSTANCE. ALL YOUR CHANGES WILL BE LOST!!!!
...
- Message : Unable to unregister object instance <object_name>.
- Description: A new event or object instance deletion has been notified; The corresponding JMX entity unregistration failed.
- Cause : This is probably due to the fact that the requested instance no longer exists on QMan and therefore was previously unregistered.
- Action: See QMan logs in order to see the name of the object that caused the failure. After that, on the same log, have a look all lifecycle events related with this entity. This should give you a clear idea of what happened.
QMAN-100014
- Message : Unable to decode value for attribute <attribute_name>.
- Description: A content indication message arrived but QMan is not able to decode correctly its data.
- Cause : This message appears under two circumstances : a malformed / corrupted message or a protocol change occured on the broker side.
- Action: See QMan logs in order to see the exact cause of the problem and after that ensure that no protocol changes occurred on broker side.
QMAN-100015
- Message : Unable to send a schema request schema for <package_name>.<class_name>
- Description: QMan is not able to send a Schema request to Qpid.
- Cause : Probably there's some problem at I/O level (i.e. network).
- Action: Ensure that connection with broker is estabilished and working.
QMAN-100016
- Message : Unable to decode value for <broker_id>:<package_name>:<class_name>.
- Description: Basically we are talking about the same thing reported on QMAN-100014. The difference is that here we have the FQN of the entity.
- Cause : see QMAN-100014.
- Action: see QMAN-100014.
QMAN-100017
- Message : Cannot connect to broker <broker_id> on <connection_data>
- Description: QMan is not able to estabilish a connection with broker <broker_id>, whose connection data is <connection_data>.
- Cause : Network issue or the target broker is not running.
- Action: Check network and target broker.
QMAN-100018
- Message : Q-Man was unable to startup correctly : see logs for further details.
- Description: QMan startup procedure fails.
- Cause : There could be many reasons for that. Probably the cause is an error in the configuration.
- Action: Check QMan configuration files and of course, have a look at logs...there should be written the exact cause of the problem.
QMAN-100019
- Message : Unexpected exception occurred on WSDM adapter layer : probably request or response was malformed.
- Description: Soap Request or response is malformed. Most probably issue occurs in the request (because response is automatically generated by QMan)
- Cause : The WS-DM adapter deals with Soap messages, which must be valid XML documents. If one of them (request or response) is malformed you get this error.
- Action: Using QMan administration console enable a fine level for WS-DM adapter log. You should see all XML messages that are exchanged during conversations.
QMAN-100020
- Message : WS-Action not supported.
- Description: An action request has been made to a QMan but the requested action is not supported by the target WS-Resource.
- Cause : Each managed WS-Resource has capabilities that include several actions (it depends by the resource interface). Probably the request has been sent to the wrong resource.
- Action: Using QMan administration console inspect the requested resource in order to see all the supported actions. Check the incoming request message in order to see if it is correct.
QMAN-100021
- Message : Unable to build RDM for resource <resource_id>.
- Description: Resource Metadata Descriptor is an artifact that is built when a WS-Resource is created. The RDM for the reported WS-Resource cannot be created.
- Cause :
- Action:
QMAN-100022
- Message : Unable to shutdown Isolation Layer.
- Description:
- Cause :
- Action:
- RDM is basically a descriptor reporting the metadata for a WS-Resource so probably the problem is in the structure of the resource (properties, operations). It is also possible that a resource interface contains a datatype that is not supported.
- Action: Using QMan administration console enable a fine level for WS-DM adapter log. You should see detailed information about the lifecycle of each managed resources including generated artifacts.
QMAN-100023
- Message : Unable to build WS artifacts.
- Description: When a WS-Resouce is created, its WSDL and RDM is generated too. The engine wasn't able to build those artifacts.
- Cause : This is, as QMAN-100021, a problem with the interface / definition of the resource that needs to be created.
- Action: Using QMan administration console enable a fine level for WS-DM adapter log. You should see detailed information about the lifecycle of each managed resources including generated artifacts.
QMAN-100024
- Message : Unable to instantiate generated capability class for <resource_id>.
- Description: When a WS-Resource is created, QMan is building several classes that represent its capabilities. This error indicates that at least one capability class failed to initialize.
- Cause : This is, as QMAN-100021, a problem with the interface / definition of the resource that needs to be created.
- Action: Using QMan administration console enable a fine level for WS-DM adapter log. You should see detailed information about the lifecycle of each managed resources including generated artifacts.
QMAN-100024
- Message : Resource manager raised an exception while creating capability for <resource_id>.
- Description: A resource manager is an internal component that handles resources lifecycle including creation and destruction. This error occurs when the resource cannot be created.
- Cause : This is, as QMAN-100021, a problem with the interface / definition of the resource that needs to be created.
- Action: Using QMan administration console enable a fine level for WS-DM adapter log. You should see detailed information about the lifecycle of each managed resources including generated artifacts.
QMAN-100024
- Message : Exception occurred while replacing the placeholder soap address with resource actual location.
- Description: Each WS-Resource has a WSDL that represents itself as a Web service. Service description is built starting from a template WSDL that contains a fake address replaced with the actual location when the resource is built.
- Cause : This is an internal QMan error and should never appear because is due to a malformed WSDL template.
- Action: Using QMan administration console enable a fine level for WS-DM adapter log. You should see detailed information about the lifecycle of each managed resources including generated artifacts.
QMAN-100027
- Message : Shutdown failure while destroying resource <resource_id>.
- Description: QMan was not able to destroy the resource <resource_id>.
- Cause : Most probably the resource was busy when the shutdown has been requested.
- Action: Using QMan administration console enable a fine level for WS-DM adapter log.
QMAN-100029
- Message : Unable to define URI for QMan resources using <uri>. It violates RFC 2396
- Description: Each WS-Resource is associated with an URI generated a runtime and based on the running environment (host, port).
- Cause : Most probably some information is missing and therefore QMan is not able to create a valid URI.
- Action: See installation instructions and ensure that all needed environment properties are correctly set.
QMAN-100030
- Message : QMan JMX core Unexpected failure while starting up.
- Description: Startup failure has occured on JMX core.
- Cause : This indicates a configuration error that occurred at startup.
- Action: Check QMan configuration files.
QMAN-100031
- Message : Bad request has been received on this WS-Resource : Initialization is not possible because the resource has already been initialized.
- Description: An initialization request has been issued to an already initialized WS-Resource.
- Cause : It is not possible to initialize a WS-Resource twice. Something was wrong on WS-DM Adapter.
- Action: Using QMan administration console enable a fine level for WS-DM adapter log. You should see detailed information about the lifecycle of each managed resources including generated artifacts.
QMAN-100032
- Message : Bad request has been received on this WS-Resource : Shutdown is not possible because the resource hasn't yet been initialized.
- Description: A shutdown request has been issued to a resource that has not been initialized.
- Cause : It is not possible to shtudown a WS-Resource that isn't initialized. Something was wrong on WS-DM Adapter.
- Action: Using QMan administration console enable a fine level for WS-DM adapter log. You should see detailed information about the lifecycle of each managed resources including generated artifacts. It is also possible that a wrong deletion message (content indication message) arrived from Qpid broker.
QMAN-100033
- Message : Bad request has been received on this WS-Resource : Shutdown is not possible because the resource has already been shutdown.
- Description: A shutdown request has been issued to an already shutdown WS-Resource.
- Cause : It is not possible to shtudown a WS-Resource twice. Something was wrong on WS-DM Adapter.
- Action: Using QMan administration console enable a fine level for WS-DM adapter log. You should see detailed information about the lifecycle of each managed resources including generated artifacts. It is also possible that a wrong deletion message (content indication message) arrived from Qpid broker.
QMAN-100034
- Message : Unable to get via XPath the schema section in WSDL.
- Description: QMan is not able to deal with WSDL template for a specific WS-Resource.
- Cause : This is an internal QMan error and should never appear because is due to a malformed WSDL template.
- Action: Using QMan administration console enable a fine level for WS-DM adapter log. You should see detailed information about the lifecycle of each managed resources including generated artifacts.