Page History

Wiki Markup
h1. {color:#003366}{*}Tuscany

...

The Tuscany Samples are shipped with Tuscany binary and source releases. If you are using tuscany from a release distribution then make sure you are looking at the documentation that corresponds to the samples as they stood at the time of the release.

 Samples{*}{color}

{color:#000000}The Tuscany Samples are shipped with Tuscany binary and source releases. If you are using tuscany from a release distribution then make sure you are looking at the documentation that corresponds to the samples as they stood at the time of the release.{color}

[2.0-beta samples

...

If however you are working with a snapshot distribution, or using samples code from the trunk of our source repository, then you've come to the right place, as the documentation here reflects the curtrent status of the samples in the trunk of our source tree.

In a distribution, the samples source code is found in either a binary or source code distribution in the samples directory, directly under the root directory. The following sections are laid out to match the structure of the samples directory and its subdirectories.

Table of Contents

minLevel	2
outline	true

getting-started

The basic package of SCA application artifacts is a contribution which for this simple sample is found in contribution-helloworld. There's also a directory which contains all you need to make a web application archive which can be deployed to a web container such as Tomcat, so that the sayHello service can be run in the web container. To see Tuscany in action you must launch a component withing a Tuscany runtime environment. Launching contributions is discussed in the "Running Tuscany" section below.

contribution-helloworld

In this folder you'll find the simplest contribution, implemented in Java, that implements the "business logic" of saying hello to a person whose name is supplied as input to the service. This contribution contains Java implementation code offering the service String sayHello(String name), where the implementation of the service prepends "Hello" to the name and prints the result to the console.

helloworld-webapp

Warning

title	TODO

It's not at all clear how this is supposed to work once it is in the web container - I have asked on the dev list

running-tuscany

Running something in Tuscany requires one or more contributions, and a method of launching the contributions to make them available as services. The sections below describes various means of launching contributions into an executing tuscany runtime.

command-line

To execute a sample contribution from the command line on Windows, from a command prompt in the samples directory, run the command ...

Code Block

 documentation|TUSCANYxDOCx2x:2.0-beta-Samples documentation]

If however you are working with a snapshot distribution, or using samples code from the trunk of our source repository, then you've come to the right place, as the documentation here reflects the curtrent status of the samples in the trunk of our source tree.

{color:#000000}In a distribution, the samples source code is found in either a binary or source code distribution in the samples directory, directly under the root directory. The following sections are laid out to match the structure of the samples directory and its subdirectories.{color}\\

{toc:outline=true|minLevel=2}

h2. getting-started

The basic package of SCA application artifacts is a contribution which for this simple sample is found in contribution-helloworld. &nbsp;There's also a&nbsp;&nbsp;directory which contains all you need to make a web application archive which can be deployed to a web container such as Tomcat, so that the sayHello service can be run in the web container. To see Tuscany in action you must launch a component withing a Tuscany runtime environment. Launching contributions is discussed in the "Running Tuscany" section below.

h3. contribution-helloworld


In this folder you'll find the simplest contribution, implemented in Java, that implements the "business logic" of saying hello to a person whose name is supplied as input to the service. This contribution contains Java implementation code offering the service String sayHello(String name), where the implementation of the service prepends "Hello" to the name and prints the result to the console.


h3. helloworld-webapp

{warning:title=TODO} It's not at all clear how this is supposed to work once it is in the web container - I have asked on the dev list
{warning}


h2. running-tuscany

Running something in Tuscany requires one or more contributions, and a method of launching the contributions to make them available as services. The sections below describes various means of launching contributions into an executing &nbsp;tuscany runtime.


h3. command-line

To execute a sample contribution from the command line on Windows, from a command prompt in the samples directory, run the command ...

{code}
..\bin\tuscany.bat "contribution-name"
{code}

for example

...



{code

}
..\bin\tuscany.bat contribution-binding-sca-calculator
{code}

or on \*nix platforms, from a shell prompt in the samples directory, run the command ...

...



{code

}
../bin/tuscany.sh contribution-binding-sca-calculator
{code}

h3. embedded-jse

...



This directory contains sample java launchers for the

...


tuscany sample contributions. To use the sample JSE launchers with ant execute the command

...


{code

}
ant run-<contributionname>
{code}

where run-<contributionname> is one of the targets in the build.xml file

...



To use this sample launcher to run all of the contributions as junit test cases, execute the command "mvn" in the launcher directory.

...




h3. embedded-osgi

...



The launchers implemented in the src/main/java/launchers directory each launch a specific contribution into the OSGI runtime.

...


To use this sample OSGI launcher with ant excute the command

...



{code

}
ant run-<contributionname>
{code}
where run-<contributionname> is one of the targets in the build.xml file

...



To use this sample launcher to run all of the contributions as junit test cases,

...


execute the command

...

 {code

mvn

in the launcher directory.

maven

To execute a sample contribution from Maven

look for contributions that have the following configuration in their pom.xml file:

...

}mvn{code} in the launcher directory.


h3. maven

To execute a sample contribution from Maven

look for contributions that have the following configuration in their pom.xml file:

<plugin>
<groupId>org.apache.tuscany.maven.plugins</groupId>

...


<artifactId>maven-tuscany-plugin</artifactId>

...


<version>2.0-SNAPSHOT</version>

...


</plugin>

...



For contributions that have this, for example, learning-more/binding-sca/contribution-calculator, do the following

...



cd samples/learning-more/binding-sca/contribution-calculator

...


mvn tuscany:run

...



This will launch the contribution in the Tuscany runtime and then wait. At this point you can use

...


other clients to send messages to services that the running SCA applcation exposes,

...


for example, try learning-more/calculator-scaclient.

h3.

...

 osgi

...



The Tuscany runtime can be run in and OSGi container.

...

Running in Equinox

On Windows, run

Code Block
Running in Equinox On Windows, run {code} java \-jar ..\..\modules\osgi-3.5.0-v20090520.jar \-configuration ..\..\features\configuration \-clean \-console {code} On \*Unix, run

...

Code Block
{code} java \-jar ../../modules/osgi-3.5.0-v20090520.jar \-configuration ../../features/configuration \-clean \-console {code} You should see the osgi console:

...



{code

}
osgi>

osgi> Jun 22, 2009 1:32:27 PM org.apache.tuscany.sca.extensibility.equinox.EquinoxServiceDiscoveryActivator start

INFO: Equinox-based service discoverer is now configured.

{code}

You can run "ss" command under the osgi> to see the status of the bundles.

...



{code

}
osgi> ss

{code}

Then you can install and start contributions as bundles by doing the following:

...



{code

}
osgi> install file:./path/to/contribution_bundle.jar

{code}

Note that contribution_bundle.jar will need an activator in order to register the bundle as a SCA contribution

...

Warning

see



{warning}
see samples/????


TODO is this still true


{warning}
Running on Felix

...



See [http://tuscany.apache.org/documentation-2x/running-tuscany-sca-2x-with-equinox-and-felix.html

...

shell

This directory contains a sample shell program supporting simple commands to
start and stop SCA composites.

To build the sample shell do this:

Code Block
] h3. shell This directory contains a sample shell program supporting simple commands to start and stop SCA composites. To build the sample shell do this: {code} mvn install {code} To run it:

...


{code

}
./sca
{code}

at the prompt:

...


{code

}
start myNode ../../applications/store/target/sample-store.jar
{code}
or:

...


{code

}
start myNode http://people.apache.org/~jsdelfino/tuscany/java/test/sample-store.jar
{code}
also try:

...


{code

}
status
stop myNode
bye
{code}
Starting and stopping composites is pretty fast. To see that, try the following

...


two scripts, which start/stop the sample store composite 10 times.

...


{code

}
./sca <scripts/test.txt

or

Code Block
{code} or {code} ./sca <scripts/test-remote.txt {code} The shell can also run as a Webapp. To try it install target/scashell.war in

...


a Web container, point your Web browser to [http://localhost:8080/scashell

...

]
and try the links on that page.


h3.

...

 webapp

...



To execute sample webapp based contributions (contributions that have webapp at the end of their name) you

...


can build the contribution using maven and then copy the resulting war file to your container of choice

...



For example, for binding-jsonrpc/contribution-calculator-webapp, do the following

...


{code

}
cd samples/binding-jsonrpc/contribution-calculator-webapp
mvn
cp target/sample-contribution-binding-jsonrpc-calculator-webapp.war your_container_deployment-dir
{code}

As an alternative sample webapp based contributions can be run within Jetty directly from Maven, look for

...


webapp contributions that have the following configuration in their pom.xml file:

...



{code

}
<plugin>
    <groupId>org.mortbay.jetty</groupId>
    <artifactId>maven-jetty-plugin</artifactId>
    <version>6.1.18</version>
</plugin>
{code}

For contributions that have this, for example, binding-jsonrpc/contribution-calculator-webapp, do the following

...



{code

}
cd samples/binding-sca/contribution-calculator
mvn jetty:run
{code}

This will launch the contribution in the Jetty runtime and then wait. At this point you can use

...


HTTP clients to send messages to services that the running SCA applcation exposes. For this

...


example try pointing your browser at:

...



{code

}
http://localhost:8080/sample-contribution-binding-jsonrpc-calculator-webapp/

{code}

h2. learning-more

...



The samples found in the contributions below illustrate how to see more of SCA and Tuscany's features in

...

async

Note

title	TODO

finish documenting

This sample demonstrates invocation of services offered in both synchronous and asynchronous forms. Asynchroncity is possible by either callback to or polling by the original service invoker.

sample-contribution-implementation-java-calculator-async

In the composite file src/main/resources/Calculator.composite the references "calculatorServiceRefSync" and "calculatorServiceRefAsync" make use of the alternative implementations of the Calculator service described in the CalculatorSync and CalculatorAsync components and implemented in the calculator.CalculatorServiceSyncImpl and calculator.CalculatorServiceAsyncImpljava classes.

embedded-jse-async-sample-launcher

Note that the launcher simply starts and stops a node running the contribution. Within the contribution the CalculatorClient java class, marked with the @EagerInit annotation, runs its calculate method (marked with the @Init annotation), thereby triggering the calculation service to be performed. The calculator service is actually performed by the injected instance of CalculatorServiceProxyImpl, which uses both of its references (one for the sync service, one for the async) to perform calculations. The calculations are then performed by instances of CalculatorServiceSyncImpl and CalculatorServiceAsyncImpl. Note that the Tuscany runtime views the following two interfaces as compatible.

Code Block


@Remotable
public interface CalculatorService {
   String calculate(Integer n1);
}

@Remotable
@AsyncInvocation

public interface CalculatorServiceAsync {

   void calculateAsync(Integer n1, ResponseDispatch<String> response);

}

binding-comet

Executing the command "mvn" in this sample project creates a web archive suitable for deployment to Tomcat. It makes use of the tuscany coment binding. Comet support allows a servlet to process IO asynchronously, receiving events when data is available for reading on the connection (rather than always using a blocking read), and writing data back on connections asynchronously (most likely responding to some event raised from some other source).

Warning

title	TODO

Needs expert review/update

binding-jsonrpc

This sample demonstrates using a simple calculator service component which makes use of four services for the basic arithmetic functions. In this variant of the calculator sample you can see by looking in the src/main/resources/Calculator.composite xml file that the AddService is configured to be invoked using the json rpc protocol.

contribution-calculator

Note

title	TODO

Understand and Document

contribution-calculator-webapp

Note

title	TODO

Understand and Document

binding-rmi

In this example the caluclator function is split over two contyributions in order to demonstrate the remote method invocation binding.

Note

title	TODO

Document

contribution-calculator-reference

Note

title	TODO

Document

contribution-calculator-service

Note

title	TODO

Document

binding-sca

Note

title	TODO

Understand and Document

contribution-calculator

Note

title	TODO

Understand and Document

binding-ws

Note

title	TODO

Understand and Document

contribution-calculator

contribution-helloworld-ws-sdo

Note

title	TODO

Understand and Document

distributed-osgi

These samples demonstrate the execution of Tuscany contributions in a distributed OSGI environment.

dosgi-dynamic-calculator

dosgi-dynamic-calculator-operations

implementation-bpel

...

title	TODO

contribution-helloworld-bpel

Note

title	TODO

check instructions work and fix up

This sample demonstrates an SCA service implemented by a BPEL process.

If you just want to run it to see what happens open a command prompt, navigate
to this sample directory, and do

Code Block
ant compile run

OR if you don't have ant, on Windows do

Code Block

 action. You'll need to employ the information above in the "running tuscany" section to select an appropriate way of runing the contributions in the samples listed below.

h3. async

This sample &nbsp;demonstrates invocation of services offered in both synchronous and asynchronous forms. Asynchroncity is possible by either callback to or polling by the original service invoker.

h4. {color:#003366}{*}sample-contribution-implementation-java-calculator-async{*}{color}

In the composite file src/main/resources/Calculator.composite the references "calculatorServiceRefSync" &nbsp;and "calculatorServiceRefAsync" make use of the alternative implementations of the Calculator service described in the CalculatorSync and CalculatorAsync components and implemented in the&nbsp;calculator.CalculatorServiceSyncImpl and calculator.CalculatorServiceAsyncImpljava classes.&nbsp;


h4. embedded-jse-async-sample-launcher


Note that the launcher simply starts and stops a node running the contribution. &nbsp;Within the contribution the CalculatorClient java class, marked with the @EagerInit annotation, runs its calculate method (marked with the @Init annotation), thereby triggering the calculation service to be performed. The calculator service is actually performed by the injected instance of CalculatorServiceProxyImpl, which uses both of its references (one for the sync service, one for the async) to perform calculations. The calculations are then performed by instances of&nbsp;CalculatorServiceSyncImpl and&nbsp;CalculatorServiceAsyncImpl. Note that the Tuscany runtime views the following two interfaces as compatible.

{code}
@Remotable
public interface CalculatorService {
   String calculate(Integer n1);
}

@Remotable
@AsyncInvocation

public interface CalculatorServiceAsync {

   void calculateAsync(Integer n1, ResponseDispatch<String> response);

}

{code}

h3. binding-comet

Executing the command "mvn" in this sample project creates a web archive suitable for deployment to Tomcat.  It makes use of the tuscany coment binding. Comet support allows a servlet to process IO asynchronously, receiving events when data is available for reading on the connection (rather than always using a blocking read), and writing data back on connections asynchronously (most likely responding to some event raised from some other source).

{warning:title=TODO}
{color:#000000}Needs expert review/update{color}
{warning}

h3. binding-jsonrpc


This sample demonstrates using a simple calculator service component which makes use of four services for the basic arithmetic functions. In this variant of the calculator sample you can see by looking in the src/main/resources/Calculator.composite xml file that the AddService is configured to be invoked using the json rpc protocol.

h4. contribution-calculator


This variant of the calculator contribution configures the AddService to be accessed via the JSON RPC protocol (see the XML in the Calculator.composite file).{warning:title=TODO}

Needs review/completion


{warning}

h4. contribution-calculator-webapp


{note:title=TODO}
{color:#000000}Understand and Document{color}
{note}

h3. binding-rmi

In this example the calculator function is split over two contributions in order to demonstrate the remote method invocation binding. The&nbsp;CalculatorService in the&nbsp;CalculatorServiceComponent defined in the&nbsp;CalculatorRMIServer.composite file is configured to be accessible using RMI.

{warning:title=TODO}

Needs review/completion


{warning

h4. contribution-calculator-reference


This contribution serves the purpose of accessing the services of the calculator service contribution, in particular defining a reference that uses the add service of that contribution using the RMI protocol.

h4. contribution-calculator-service


This contribution defines the calcullators add service to be available via RMI invocation.

h3. binding-sca


{note:title=TODO}
{color:#000000}Understand and Document{color}
{note}

h4. contribution-calculator


{note:title=TODO}
{color:#000000}Understand and Document{color}
{note}

h3. binding-ws


{note:title=TODO}
{color:#000000}Understand and Document{color}
{note}

h4. contribution-calculator

h4. contribution-helloworld-ws-sdo

{note:title=TODO}
{color:#000000}Understand and Document{color}
{note}


h3. distributed-osgi

These samples demonstrate the execution of Tuscany contributions in a distributed OSGI environment.

h4. dosgi-dynamic-calculator


h4. dosgi-dynamic-calculator-operations


h3. implementation-bpel
{note:title=TODO}{note}

h4. contribution-helloworld-bpel
{note:title=TODO}check instructions work and fix up{note}
This sample demonstrates an SCA service implemented by a BPEL process.

If you just want to run it to see what happens open a command prompt, navigate
to this sample directory, and do
{code}
ant compile run
{code}
OR if you don't have ant, on Windows do

{code}
mkdir target\classes
mkdir target\wsdl2java-source
java \-cp ..\..\lib\tuscany-sca-manifest.jar org.apache.tuscany.sdo.generate.XSD2JavaGenerator \-targetDirectory target/wsdl2java-source \-prefix HelloWorld \-noContainment \-noUnsettable src/main/resources/helloworld.wsdl
java \-cp ..\..\lib\tuscany-sca-manifest.jar org.apache.tuscany.tools.wsdl2java.generate.WSDL2JavaGenerator \-targetDirectory target/wsdl2java-source src/main/resources/helloworld.wsdl
unzip ..\..\lib\ode-dao-jpa-ojpa-derby-1.1.zip \-d target\database
javac \-d target\classes \-cp target\classes;..\..\lib\tuscany-sca-manifest.jar \-sourcepath src\main\java;target\wsdl2java-source \-target 1.5 \-g \-source 1.5 src\main\java\helloworld\BPELClient.java
copy src\main\resources\* target\classes
java \-cp ..\..\lib\tuscany-sca-manifest.jar;target\classes;target\database helloworld.BPELClient
{code}
and on \*nix do

...


{code

}
mkdir target/classes
mkdir target/wsdl2java-source
java \-cp ../../lib/tuscany-sca-manifest.jar org.apache.tuscany.sdo.generate.XSD2JavaGenerator \-targetDirectory target/wsdl2java-source \-prefix HelloWorld \-noContainment \-noUnsettable src/main/resources/helloworld.wsdl
java \-cp ../../lib/tuscany-sca-manifest.jar org.apache.tuscany.tools.wsdl2java.generate.WSDL2JavaGenerator \-targetDirectory target/wsdl2java-source src/main/resources/helloworld.wsdl
unzip ../../lib/ode-dao-jpa-ojpa-derby-1.1.zip \-d target/database
javac \-d target/classes \-cp target/classes;../../lib/tuscany-sca-manifest.jar \-sourcepath src/main/java;target/wsdl2java-source \-target 1.5 \-g \-source 1.5 src/main/java/helloworld/BPELClient.java
cp src/main/resources/\* target/classes
java \-cp ../../lib/tuscany-sca-manifest.jar:target/classes:target/database helloworld.BPELClient
{code}
The sample will start an embedded BPEL engine, deploy a process and invoke it.

...



*Sample Overview

...

*

The sample provides a single component that is wired to a service with a

...


web service binding.

...



{code

}
helloworld-bpel/
src/
main/
java/
helloworld/
BPELClient.java          	  - client application for
BEPELHelloWorldComponent

resources/
deploy.xml			  - ODE deployment descriptor
helloworld.bpel		  - helloworld bpel process
helloworld.componentType	  - helloworld bpel service description
helloworld.composite            - the SCA assembly for this sample
helloworld.wsdl                 - the service description that describes
the bpel process
log4j.properties                - logging configuration

test/
java/
helloworld/
BPELHelloWorldTestCase.java     - JUnit test case
helloworld-bpel.png                     - a pictorial representation of the
sample .composite file
build.xml                               - the Ant build file
pom.xml                                 - the Maven build file
{code}
*Building And Running The Sample Using Ant

...

*

With the binary distribution the sample can be built and run using Ant as

...


follows

...



{code

}
cd helloworld-bpel
ant compile
ant run
{code}
You should see the following output from the run target.

...



{code

}
run:
[java] Starting BPELHelloWorldComponent
[java] >>> Deploying : D:\temp\SCA1.1-RC1\tuscany-sca-1.1-incubating\samples\helloworld-bpel\target\classes
[java] ::arg:::::: <?xml version="1.0" encoding="UTF-8"?>
[java] <hello xmlns="http://tuscany.apache.org/implementation/bpel/example/helloworld.wsdl"><message xmlns="http://tuscany.apache.org/implementation/bpel/exampl
e/helloworld.wsdl">Hello</message></hello>
[java] ::message:: <?xml version="1.0" encoding="UTF-8"?>
[java] <message><TestPart><hello xmlns="http://tuscany.apache.org/implementation/bpel/example/helloworld.wsdl"><message xmlns="http://tuscany.apache.org/impleme
ntation/bpel/example/helloworld.wsdl">Hello</message></hello></TestPart></message>
[java] Status: RESPONSE
[java] Response: <?xml version="1.0" encoding="UTF-8"?>
[java] <message><TestPart><hello xmlns="http://tuscany.apache.org/implementation/bpel/example/helloworld.wsdl">Hello World</hello></TestPart></message>
[java] Hello World
[java] Stopping BPELHelloWorldComponent
[java] Stopped \!\!\!

BUILD SUCCESSFUL
Total time: 36 seconds
{code}
*Building And Running The Sample Using Maven

...

*

With either the binary or source distributions the sample can be built and run

...


using Maven as follows. When using Maven, a simple test is present that exercise

...


the same logic as the client to invoke the BPEl process.

...


{code

}
cd helloworld-bpel
mvn
{code}
You should see the following output from the test phase.

...



{code

}
\------------------------------------------------------\-
T E S T S
\------------------------------------------------------\-
Running helloworld.BPELHelloWorldTestCase
Starting BPELHelloWorldComponent
>>> Deploying : D:\dev\Opensource\Apache\Tuscany\source\java-sca-1.1\samples\helloworld-bpel\target\classes
::arg:::::: <?xml version="1.0" encoding="UTF-8"?>
<hello xmlns="http://tuscany.apache.org/implementation/bpel/example/helloworld.wsdl"><message xmlns="http://tuscany.apache.org/implementation/bpel/example/helloworld
.wsdl">Hello</message></hello>
::message:: <?xml version="1.0" encoding="UTF-8"?>
<message><TestPart><hello xmlns="http://tuscany.apache.org/implementation/bpel/example/helloworld.wsdl"><message xmlns="http://tuscany.apache.org/implementation/bpel
/example/helloworld.wsdl">Hello</message></hello></TestPart></message>
Status: RESPONSE
Response: <?xml version="1.0" encoding="UTF-8"?>
<message><TestPart><hello xmlns="http://tuscany.apache.org/implementation/bpel/example/helloworld.wsdl">Hello World</hello></TestPart></message>
Stopping BPELHelloWorldComponent
Stopped \!\!\!
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 18.656 sec

Results :

Tests run: 1, Failures: 0, Errors: 0, Skipped: 0

[INFO] [jar:jar]
[INFO] Building jar: D:\dev\Opensource\Apache\Tuscany\source\java-sca-1.1\samples\helloworld-bpel\target\sample-helloworld-bpel.jar
[INFO] [install:install]
[INFO] Installing D:\dev\Opensource\Apache\Tuscany\source\java-sca-1.1\samples\helloworld-bpel\target\sample-helloworld-bpel.jar to C:\Documents and Settings\lresend
e\.m2\repository\org\apache\tuscany\sca\sample-helloworld-bpel\1.1-incubating-SNAPSHOT\sample-helloworld-bpel-1.1-incubating-SNAPSHOT.jar
[INFO] \-----------------------------------------------------------------------\-
[INFO] BUILD SUCCESSFUL
[INFO] \-----------------------------------------------------------------------\-
[INFO] Total time: 53 seconds
[INFO] Finished at: Sun Jan 13 09:54:39 PST 2008
[INFO] Final Memory: 24M/43M
[INFO] \-----------------------------------------------------------------------\-

Code Block

This shows that the Junit test cases have run successfully.


{code}

{code}

{code}

This shows that the Junit test cases have run successfully.

h4. helloworld-bpel-webapp

...



h3. implementation-composite

...

{note
:title	TODO
Understand and Document

helloworld-recursive

Note

title	TODO

Understand and Document

=TODO}
{color:#000000}Understand and Document{color}
{note}

h4. helloworld-recursive

{note:title=TODO}Understand and Document{note}

h4. helloworld-recursive-ws

...

{note
:title	TODO
Understand and Document
=TODO} {color:#000000}Understand and Document{color} {note} h3. implementation-extension

...

{note
:title	TODO
Understand and Document
=TODO} {color:#000000}Understand and Document{color} {note} h3. implementation-java

...

{note
:title	TODO
Understand and Document
=TODO} {color:#000000}Understand and Document{color} {note} h4. contribution-calculator

...

{note
:title	TODO
Understand and Document

implementation.osgi

dosgi-calculator

=TODO}
{color:#000000}Understand and Document{color}
{note}

h3. implementation.osgi

h4. dosgi-calculator


h4. dosgi-calculator-operations

...

{note
:title	TODO
Understand and Document
=TODO} {color:#000000}Understand and Document{color} {note} h3. implementation-script

...


{note

title	TODO

Understand and Document

contribution-calculator

Note

title	TODO

Understand and Document

implementation-spring

Note

title	TODO

Understand and Document

contribution-helloworld-spring

Note

title	TODO

Understand and Document

helloworld-spring-webapp

implementation-webapp

helloworld-jaxrs-webapp

helloworld-jms-webapp

:title=TODO}
{color:#000000}Understand and Document{color}
{note}

h4. contribution-calculator
{note:title=TODO}
{color:#000000}Understand and Document{color}
{note}

h3. implementation-spring
{note:title=TODO}
{color:#000000}Understand and Document{color}
{note}

h4. contribution-helloworld-spring

{note:title=TODO}
{color:#000000}Understand and Document{color}
{note}

h4. helloworld-spring-webapp

h3. implementation-webapp

h4. helloworld-jaxrs-webapp


h4. helloworld-jms-webapp


h4. helloworld-js-client-webapp

...




h4. helloworld-jsf-webapp

...




h4. helloworld-jsp-webapp

...




h4. helloworld-servlet-

...

webapp


h4. helloworld-stripes-webapp

...



h3. logging-scribe

...

{note
:title	TODO
Understand and Document
=TODO} {color:#000000}Understand and Document{color} {note} h3. maven-osgi-junit

...

{note
:title	TODO
Understand and Document
=TODO} {color:#000000}Understand and Document{color} {note} h4. calculator-osgi

...

Note

title	TODO

Understand and Document


{note:title=TODO}
{color:#000000}Understand and Document{color}
{note}

h4. calculator-rest-osgi

...

{note
:title	TODO
Understand and Document
=TODO} {color:#000000}Understand and Document{color} {note} h3. sca-client

...

{note
:title	TODO
Understand and Document
=TODO} {color:#000000}Understand and Document{color} {note} h4. calculator-scaclient

...


{note

Note

title	TODO

:title

TODO

Understand and Document

helloworld-scaclient

Note

title	TODO

Understand and Document

applications

Note

title	TODO

Understand and Document

store

Note

title	TODO

Understand and Document

Note

title	TODO

Understand and Document

store-webapp

Understand and Document

=TODO}
{color:#000000}Understand and Document{color}
{note}

h4. helloworld-scaclient

{note:title=TODO}
{color:#000000}Understand and Document{color}
{note}

h2. applications
{note:title=TODO}
{color:#000000}Understand and Document{color}
{note}

h3. store
{note:title=TODO}
{color:#000000}Understand and Document{color}
{note}

h3. store-webapp
{note:title=TODO}
{color:#000000}Understand and Document{color}
{note}

Page History

Versions Compared

Old Version 43

New Version 44

Key

getting-started

contribution-helloworld

helloworld-webapp

running-tuscany

command-line

maven

shell

async

sample-contribution-implementation-java-calculator-async

embedded-jse-async-sample-launcher

binding-comet

binding-jsonrpc

contribution-calculator

contribution-calculator-webapp

binding-rmi

contribution-calculator-reference

contribution-calculator-service

binding-sca

contribution-calculator

binding-ws

contribution-calculator

contribution-helloworld-ws-sdo

distributed-osgi

dosgi-dynamic-calculator

dosgi-dynamic-calculator-operations

implementation-bpel

contribution-helloworld-bpel

helloworld-recursive

implementation.osgi

dosgi-calculator

contribution-calculator

implementation-spring

contribution-helloworld-spring

helloworld-spring-webapp

implementation-webapp

helloworld-jaxrs-webapp

helloworld-jms-webapp

helloworld-scaclient

applications

store

store-webapp