THIS IS A TEST INSTANCE. ALL YOUR CHANGES WILL BE LOST!!!!
Wiki Markup |
---|
h2. SEDA Component
The *seda:* component provides asynchronous [SEDA|http://www.eecs.harvard.edu/~mdw/proj/seda/] behavior, so that messages are exchanged on a [BlockingQueue|http://java.sun.com/j2se/1.5.0/docs/api/java/util/concurrent/BlockingQueue.html] and consumers are invoked in a separate thread from the producer.
Note that queues are only visible within a _single_ [CamelContext]. If you want to communicate across {{CamelContext}} instances (for example, communicating between Web applications), see the [VM] component.
This component does not implement any kind of persistence or recovery, if the VM terminates while messages are yet to be processed. If you need persistence, reliability or distributed SEDA, try using either [JMS] or [ActiveMQ].
{tip:title=Synchronous}
The [Direct] component provides synchronous invocation of any consumers when a producer sends a message exchange.
{tip}
h3. URI format
{code}
seda:someName[?options]
{code}
Where *someName* can be any string that uniquely identifies the endpoint within the current [CamelContext].
You can append query options to the URI in the following format: {{?option=value&option=value&…}}
h3. Options
{div:class=confluenceTableSmall}
|| Name || Since || Default || Description ||
| {{size}} | | | The maximum capacity of the SEDA queue (i.e., the number of messages it can hold). The default value in Camel 2.2 or older is {{1000}}. From Camel 2.3 onwards, the size is unbounded by default. *Notice:* Mind if you use this option, then its the first endpoint being created with the queue name, that determines the size. To make sure all endpoints use same size, then configure the size option on all of them, or the first endpoint being created. From *Camel 2.11* onwards, a validation is taken place to ensure if using mixed queue sizes for the same queue name, Camel would detect this and fail creating the endpoint. |
| {{concurrentConsumers}} | | {{1}} | Number of concurrent threads processing exchanges. |
| {{waitForTaskToComplete}} | | {{IfReplyExpected}} | Option to specify whether the caller should wait for the async task to complete or not before continuing. The following three options are supported: {{Always}}, {{Never}} or {{IfReplyExpected}}. The first two values are self-explanatory. The last value, {{IfReplyExpected}}, will only wait if the message is [Request Reply] based. The default option is {{IfReplyExpected}}. See more information about [Async] messaging. |
| {{timeout}} | | {{30000}} | Timeout (in milliseconds) before a SEDA producer will stop waiting for an asynchronous task to complete. See {{waitForTaskToComplete}} and [Async] for more details. In *Camel 2.2* you can now disable timeout by using 0 or a negative value. |
| {{multipleConsumers}} | *2.2* | {{false}} | Specifies whether multiple consumers are allowed. If enabled, you can use [SEDA] for [Publish-Subscribe|http://en.wikipedia.org/wiki/Publish%E2%80%93subscribe_pattern] messaging. That is, you can send a message to the SEDA queue and have each consumer receive a copy of the message. When enabled, this option should be specified on every consumer endpoint. |
| {{limitConcurrentConsumers}} | *2.3* | {{true}} | Whether to limit the number of {{concurrentConsumers}} to the maximum of {{500}}. By default, an exception will be thrown if a SEDA endpoint is configured with a greater number. You can disable that check by turning this option off. |
| {{blockWhenFull}} | *2.9* | {{false}} | Whether a thread that sends messages to a full SEDA queue will block until the queue's capacity is no longer exhausted. By default, an exception will be thrown stating that the queue is full. By enabling this option, the calling thread will instead block and wait until the message can be accepted. |
| {{queueSize}} | *2.9* | | *Component only:* The maximum default size (capacity of the number of messages it can hold) of the SEDA queue. This option is used if {{size}} is not in use. |
| {{pollTimeout}} | *2.9.3* | {{1000}} | _Consumer only_ -- The timeout used when polling. When a timeout occurs, the consumer can check whether it is allowed to continue running. Setting a lower value allows the consumer to react more quickly upon shutdown. |
{div}
h3. Use of Request Reply
The [Seda] component supports using [Request Reply], where the caller will wait for the [Async] route to complete. For instance:
{code}
from("mina:tcp://0.0.0.0:9876?textline=true&sync=true").to("seda:input");
from("seda:input").to("bean:processInput").to("bean:createResponse");
{code}
In the route above, we have a TCP listener on port 9876 that accepts incoming requests. The request is routed to the {{seda:input}} queue. As it is a [Request Reply] message, we wait for the response. When the consumer on the {{seda:input}} queue is complete, it copies the response to the original message response.
{note:title=until 2.2: Works only with 2 endpoints}
Using [Request Reply] over [SEDA] or [VM] only works with 2 endpoints. You *cannot* chain endpoints by sending to A -> B -> C etc. Only between A -> B. The reason is the implementation logic is fairly simple. To support 3+ endpoints makes the logic much more complex to handle ordering and notification between the waiting threads properly.
This has been improved in *Camel 2.3* onwards, which allows you to chain as many endpoints as you like.
{note}
h3. Concurrent consumers
By default, the SEDA endpoint uses a single consumer thread, but you can configure it to use concurrent consumer threads. So instead of thread pools you can use:
{code}
from("seda:stageName?concurrentConsumers=5").process(...)
{code}
As for the difference between the two, note a _thread pool_ can increase/shrink dynamically at runtime depending on load, whereas the number of concurrent consumers is always fixed.
h3. Thread pools
Be aware that adding a thread pool to a SEDA endpoint by doing something like:
{code}
from("seda:stageName").thread(5).process(...)
{code}
Can wind up with two {{BlockQueues}}: one from the SEDA endpoint, and one from the workqueue of the thread pool, which may not be what you want. Instead, you might wish to configure a [Direct] endpoint with a thread pool, which can process messages both synchronously and asynchronously. For example:
{code}
from("direct:stageName").thread(5).process(...)
{code}
You can also directly configure number of threads that process messages on a SEDA endpoint using the {{concurrentConsumers}} option.
h3. Sample
In the route below we use the SEDA queue to send the request to this async queue to be able to send a fire-and-forget message for further processing in another thread, and return a constant reply in this thread to the original caller.
{snippet:id=e1|lang=java|url=camel/trunk/camel-core/src/test/java/org/apache/camel/component/seda/SedaAsyncRouteTest.java}
Here we send a Hello World message and expects the reply to be OK.
{snippet:id=e2|lang=java|url=camel/trunk/camel-core/src/test/java/org/apache/camel/component/seda/SedaAsyncRouteTest.java}
The "Hello World" message will be consumed from the SEDA queue from another thread for further processing. Since this is from a unit test, it will be sent to a {{mock}} endpoint where we can do assertions in the unit test.
h3. Using multipleConsumers
*Available as of Camel 2.2*
In this example we have defined two consumers and registered them as spring beans.
{snippet:id=e1|lang=xml|url=camel/trunk/components/camel-spring/src/test/resources/org/apache/camel/spring/example/fooEventRoute.xml}
Since we have specified *multipleConsumers=true* on the seda foo endpoint we can have those two consumers receive their own copy of the message as a kind of pub-sub style messaging.
As the beans are part of an unit test they simply send the message to a mock endpoint, but notice how we can use @Consume to consume from the seda queue.
{snippet:id=e1|lang=java|url=camel/trunk/components/camel-spring/src/test/java/org/apache/camel/spring/example/FooEventConsumer.java}
h3. Extracting queue information.
If needed, information such as queue size, etc. can be obtained without using JMX in this fashion:
{code}
SedaEndpoint seda = context.getEndpoint("seda:xxxx");
int size = seda.getExchanges().size();
{code}
{include:Endpoint See Also}
- [VM]
- [Direct]
- [Async] |