...
- OVS element shall declare 'distributedrouting' as supported capability for 'Connectivity' service.
- OvsElement uses prepare() and release() phases phase in NIC life cycle to implement tunnels and setup bridges on hypervisors. Following changes shall be needed in nic prepare phase:
- current logic of preparing a NIC is described as below, if the VM's is first VM from the network being launched on a host.
- get the list of hosts on which network spans currently
- create tunnel from the current host on which VM being launched to all the host on which network spans
- create tunnel from all the host on which network spans to the current host on which VM being launched
- check shall be made if network is part of VPC, if its part of VPC, and VPC offering does not have 'distributedrouting' capability enabled current flow of actions outlined above shall be performed during the nic prepare phase
- if network is part of VPC, and VPC offering has 'distributedrouting' capability enabled then following actions shall be performed.
- if there is VPC VR running on the current host on which VM is being launched then proceed with steps outlined above (i.e setting up tunnels just with the bridge corresponding to network).
- if VPC VR is running on different host than the current host on which VM is being launched, then following actions shall be performed:
- for each network in the VPC create a bridged network
- for each of the bridge created for the tier in the VPC, form full mesh of tunnels with the hosts on which network/tier spans
- create a bridge that shall act as logical router and connect each bridge created in previous step with patch port to logical router
- set up flow rules on each bridge to;
- exclude mac learning and flooding on patch port
- for traffic destined to other tiers send the traffic on the patch port
- for the rest of the traffic from VIF's connected to VM, tunnel interface and patch port do normal (L2 switching) processing
- set up flow rules on logical router bridge to:
- reflect flows corresponding to current ingress ACL's and egress ACL's set on tier
- set flows to route traffic on appropriate patch port based on the destination ip's subnet
- OvsElement release() phases in NIC life cycle to destroy tunnels and bridges on hypervisors. Following changes shall be needed in nic release phase enhancements::
- current logic of releasing a NIC is described as below, if the VM's is last VM from the network being deleted on the host.
- get the list of hosts on which network spans currently
- delete tunnel from all the hosts on which network spans to the current host on which VM being deleted
- destroy the bridge
- check shall be made if network is part of VPC, if its part of VPC, and VPC offering does not have 'distributedrouting' capability enabled current flow of actions outlined above for release phase shall be performed during the nic release
- if network is part of VPC, and VPC offering has 'distributedrouting' capability enabled & VM is not the LAST vm from VPC on the host then proceed with above steps for release phase
- if network is part of VPC, and VPC offering has 'distributedrouting' capability enabled & VM is LAST vm from VPC on the host then following steps shall be performed
- for each network/tier in the VPC:
- get the list of hosts on which tier spans
- delete tunnels from the all the hosts on which tier spans to the current host on which VM is being deleted
- destroy the bridge for the tier
- destroy the logical router
- VM migration handler:NetworkMigrationResponder
- replaceNetworkACLList enhancements
...
{"serverDuration": 99, "requestCorrelationId": "a52eaf4be0029077"}