SEDA Component
The seda:
component provides asynchronous SEDA behavior, so that messages are exchanged on a BlockingQueue and consumers are invoked in a separate thread from the producer.
Note that queues are only visible within a single CamelContext. If you want to communicate across CamelContext
instances (for example, communicating between Web applications), see the VM component.
This component does not implement any kind of persistence or recovery, if the VM terminates while messages are yet to be processed. If you need persistence, reliability or distributed SEDA, try using either JMS or ActiveMQ.
Tip | ||
---|---|---|
| ||
The Direct component provides synchronous invocation of any consumers when a producer sends a message exchange. |
URI format
Code Block |
---|
seda:someName[?options] |
Where someName
can be any string that uniquely identifies the endpoint within the current CamelContext.
You can append query options to the URI in the following format: ?option=value&option=value&...
Options
Name | Since | Default | Description | ||
---|---|---|---|---|---|
| The maximum capacity of the seda queue, i.e., the number of messages it can hold. The default value in Camel 2.2 or older is From Camel 2.3: the size is unbounded by default.
| ||||
|
| Number of concurrent threads processing exchanges. | |||
|
| Option to specify whether the caller should wait for the asynchronous task to complete before continuing. The following options are supported:
The first two values are self-explanatory. The last value, See Async messaging for more details. | |||
|
| Timeout (in milliseconds) before a seda producer will stop waiting for an asynchronous task to complete. See From Camel 2.2: you can now disable timeout by using | |||
| 2.2 |
| Specifies whether multiple consumers are allowed. If enabled, you can use SEDA for Publish-Subscribe messaging. That is, you can send a message to the seda queue and have each consumer receive a copy of the message. When enabled, this option should be specified on every consumer endpoint. | ||
| 2.3 |
| Whether to limit the number of By default, an exception will be thrown if a seda endpoint is configured with a greater number. You can disable that check by turning this option off. | ||
| 2.9 |
| Whether a thread that sends messages to a full seda queue will block until the queue's capacity is no longer exhausted. By default, an exception will be thrown stating that the queue is full. By enabling this option, the calling thread will instead block and wait until the message can be accepted. | ||
| 2.9 | Component only: the maximum size (capacity of the number of messages it can hold) of the seda queue.
| |||
| 2.9.3 |
| Consumer only: the timeout used when polling. When a timeout occurs, the consumer can check whether it is allowed to continue running. Setting a lower value allows the consumer to react more quickly upon shutdown. | ||
| 2.11.1 |
| Whether to purge the task queue when stopping the consumer/route. This allows to stop faster, as any pending messages on the queue is discarded. | ||
| 2.12.0 |
| Define the queue instance which will be used by seda endpoint | ||
| 2.12.0 |
| Define the | ||
| 2.12.0 |
| Whether the producer should fail by throwing an exception when sending to a seda queue with no active consumers.
| ||
| 2.16 |
| Whether the producer should discard the message (do not add the message to the queue) when sending to a seda queue with no active consumers.
|
Choosing BlockingQueue implementation
Available as of Camel 2.12
Code Block | ||
---|---|---|
| ||
<bean id="arrayQueue" class="java.util.ArrayBlockingQueue"> <constructor-arg index="0" value="10"> <!-- size --> <constructor-arg index="1" value="true"> <!-- fairness --> </bean> <!-- ... --> <from uri="seda:array?queue=#arrayQueue"/> |
By default, the seda component instantiates a LinkedBlockingQueue
. However, a different implementation can be chosen by specifying a custom BlockingQueue
implementation. When a custom implementation is configured the size
option is ignored.
The list of available BlockingQueueFactory
implementations includes:
LinkedBlockingQueueFactory
ArrayBlockingQueueFactory
PriorityBlockingQueueFactory
Code Block | ||
---|---|---|
| ||
<bean id="priorityQueueFactory" class="org.apache.camel.component.seda.PriorityBlockingQueueFactory"> <property name="comparator"> <bean class="org.apache.camel.demo.MyExchangeComparator"/> </property> </bean> <!-- ...and later --> <from uri="seda:priority?queueFactory=#priorityQueueFactory&size=100"/> <!-- ... --> |
Use of Request Reply
The SEDA component supports using Request Reply, where the caller will wait for the Async route to complete. For instance:
Code Block | ||
---|---|---|
| ||
from("mina:tcp://0.0.0.0:9876?textline=true&sync=true") .to("seda:input"); from("seda:input") .to("bean:processInput") .to("bean:createResponse"); |
In the route above, we have a TCP listener on port 9876
that accepts incoming requests. The request is routed to the seda:input
queue. As it is a Request Reply message, we wait for the response. When the consumer on the seda:input
queue is complete, it copies the response to the original message response.
Note | ||
---|---|---|
| ||
Using Request Reply over SEDA or VM only works with 2 endpoints. You cannot chain endpoints by sending to This has been improved in Camel 2.3, which allows you to chain as many endpoints as you like. |
Concurrent consumers
By default, the SEDA endpoint uses a single consumer thread, but you can configure it to use concurrent consumer threads. So, instead of thread pools you can use:
Code Block | ||
---|---|---|
| ||
from("seda:stageName?concurrentConsumers=5") .process(...) |
As for the difference between the two, note a thread pool can increase/shrink dynamically at runtime depending on load, whereas the number of concurrent consumers is always fixed.
Thread pools
Be aware that adding a thread pool to a seda endpoint by doing something like:
Code Block | ||
---|---|---|
| ||
from("seda:stageName") .thread(5) .process(...) |
Can wind up with two BlockQueues
: one from the seda endpoint, and one from the workqueue of the thread pool, which may not be what you want. Instead, you might wish to configure a Direct endpoint with a thread pool, which can process messages both synchronously and asynchronously. For example:
Code Block | ||
---|---|---|
| ||
from("direct:stageName") .thread(5) .process(...) |
You can also directly configure number of threads that process messages on a seda endpoint using the concurrentConsumers
option.
Sample
In the route below we use the SEDA queue to send the request to this asynchronous queue to be able to send a fire-and-forget message for further processing in another thread, and return a constant reply in this thread to the original caller.
Wiki Markup |
---|
{snippet:id=e1|lang=java|url=camel/trunk/camel-core/src/test/java/org/apache/camel/component/seda/SedaAsyncRouteTest.java} |
Wiki Markup |
---|
{snippet:id=e2|lang=java|url=camel/trunk/camel-core/src/test/java/org/apache/camel/component/seda/SedaAsyncRouteTest.java} |
Hello World
message will be consumed from the seda queue from another thread for further processing. Since this is from a unit test, it will be sent to a mock
endpoint where we can do assertions in the unit test.Using multipleConsumers
Available as of Camel 2.2
In this example we have defined two consumers and registered them as spring beans.
Wiki Markup |
---|
{snippet:id=e1|lang=xml|url=camel/trunk/components/camel-spring/src/test/resources/org/apache/camel/spring/example/fooEventRoute.xml} |
multipleConsumers=true
on the seda foo
endpoint we can have those two consumers receive their own copy of the message as a kind of pub-sub style messaging.As the beans are part of an unit test they simply send the message to a mock
endpoint. Note the use of @Consume
to consume from the seda queue.
Wiki Markup |
---|
{snippet:id=e1|lang=java|url=camel/trunk/components/camel-spring/src/test/java/org/apache/camel/spring/example/FooEventConsumer.java} |
Extracting Queue Information.
If needed, information such as queue size, etc. can be obtained without using JMX in this fashion:
Code Block | ||
---|---|---|
| ||
SedaEndpoint seda = context.getEndpoint("seda:xxxx"); int size = seda.getExchanges().size(); |
Include Page | ||||
---|---|---|---|---|
|