Table of Contents |
---|
Status
Current state: Under DiscussionAccepted
Discussion thread:
JIRA:
Jira | ||||||
---|---|---|---|---|---|---|
|
Please keep the discussion on the mailing list rather than commenting on the wiki (wiki discussions get unwieldy fast).
Motivation
Background
The KRaft controller was designed to be isolated from Kafka clients. This isolation helps prevent misbehaving clients from compromising the performance of the system. It also clarifies node roles: brokers are responsible for client traffic. However, there are certain edge cases where it is reasonable for clients to communicate with KRaft controllers.
Sometimes, we would like to target controllers directly. Typically this is so that we can perform an administrative operation without involving the brokers. DESCRIBE_QUORUM is a great example. This operation has nothing to do with the brokers, and may indeed be useful for debugging when other parts of the system are down. Another good example is using INCREMENTAL_ALTER_CONFIGS to make log4j level changes on a KRaft controller.
Overview
...
AdminClient
New Kafka admin clients which support KIP-919 will be able to target KRaft controllers directly. This Because we don't support producing or consuming on the controllers, this only applies to admin clients, since it is and not possible to produce or consume from a quorum controller.
Public Interfaces
bootstrap.controllers configuration
There will be a new AdminClient
configuration, bootstrap.controllers
. This configuration contains a comma-separated series of hostname:port entries. When this configuration is specified, the AdminClient will talk directly to the controller quorum and the brokers will not be involved.
KafkaProducer
and KafkaConsumer
will not support bootstrap.controllers.
Only AdminClient
will support it.
It is an error to set both bootstrap.controllers
and bootstrap.servers
. Only one can be set at a time. It is also an error to include broker endpoints in --bootstrap-controllers
. If we contact a broker via this mechanism, the command will fail.
Just as with bootstrap.servers
, the supplied server list doesn't need to be exhaustive. As long as we can contact one of the provided controllers the RPC can proceed.
Command-line Changes
New Arguments
The following command-line tools will get a new --bootstrap-controllers
argument:
- kafka-acls.sh
- kafka-cluster.sh
- kafka-configs.sh
- kafka-delegation-tokens.sh
- kafka-features.sh
- kafka-metadata-quorum.sh
kafka-metadata-shell.sh
- kafka-reassign-partitions.sh
When the --bootstrap-controllers
argument is used --bootstrap-servers
must not be specified.
The --bootstrap-controllers
flag will set the bootstrap.controllers
configuration described above. It will also clear the bootstrap.servers
configuration if that has been set in some other way (for example, via a configuration file provided to the command-line tool).
The --bootstrap-controllers
flag will be documented as follows:
Code Block |
---|
--bootstrap-controllers CONTROLLERS
A comma-separted list of bootstrap.controllers that can be supplied instead of boostrap-servers.
This is useful for administrators who wish to bypass the brokers. |
Changes to kafka-metadata-shell.sh
The metadata shell will now have these arguments:
Code Block |
---|
The Apache Kafka metadata tool
positional arguments:
command The command to run.
optional arguments:
-h, --help show this help message and exit
--directory DIRECTORY, -d DIRECTORY
The __cluster_metadata-0 directory to read.
--bootstrap-controllers CONTROLLERS, -q CONTROLLERS
The bootstrap.controllers, used to communicate directly with the metadata quorum.
--config CONFIG Path to a property file containing a Kafka configuration |
Note that:
- The
--snapshot
argument has been replaced by a--directory
argument that reads the whole directory, not just a snapshot file - There is no need for a
--cluster-id
flag, since we will query the controller for its cluster ID prior to creating the Raft client. - There is now a
--config
argument which can be used to pass a configuration file.
Since kafka-metadata-shell.sh
is at an "evolving" level of interface stability, these changes should be OK to make without a deprecation period.
MetadataRequest Changes
There will be a new version of MetadataRequest. It will contain an additional field, DirectToKRaftControllerQuorum
.
This field defaults to false.
Code Block |
---|
diff --git a/clients/src/main/resources/common/message/MetadataRequest.json b/clients/src/main/resources/common/message/MetadataRequest.json
index 5da95cfed6..8e5e765d11 100644
--- a/clients/src/main/resources/common/message/MetadataRequest.json
+++ b/clients/src/main/resources/common/message/MetadataRequest.json
@@ -18,7 +18,7 @@
"type": "request",
"listeners": ["zkBroker", "broker"],
"name": "MetadataRequest",
- "validVersions": "0-12",
+ "validVersions": "0-13",
"flexibleVersions": "9+",
"fields": [
// In version 0, an empty array indicates "request metadata for all topics." In version 1 and
@@ -50,6 +50,8 @@
{ "name": "IncludeClusterAuthorizedOperations", "type": "bool", "versions": "8-10",
"about": "Whether to include cluster authorized operations." },
{ "name": "IncludeTopicAuthorizedOperations", "type": "bool", "versions": "8+",
- "about": "Whether to include topic authorized operations." }
+ "about": "Whether to include topic authorized operations." },
+ { "name": "DirectToKRaftControllerQuorum", "type": "bool", "versions": "13+",
+ "about": "Whether to target the KRaft controller quorum." }
]
}
diff --git a/clients/src/main/resources/common/message/MetadataResponse.json b/clients/src/main/resources/common/message/MetadataResponse.json
index 928d905152..085c0d919f 100644
--- a/clients/src/main/resources/common/message/MetadataResponse.json
+++ b/clients/src/main/resources/common/message/MetadataResponse.json
@@ -42,7 +42,7 @@
// Version 11 deprecates ClusterAuthorizedOperations. This is now exposed
// by the DescribeCluster API (KIP-700).
// Version 12 supports topicId.
- "validVersions": "0-12",
+ "validVersions": "0-13",
"flexibleVersions": "9+",
"fields": [
{ "name": "ThrottleTimeMs", "type": "int32", "versions": "3+", "ignorable": true,
@@ -94,6 +94,8 @@
"about": "32-bit bitfield to represent authorized operations for this topic." }
]},
{ "name": "ClusterAuthorizedOperations", "type": "int32", "versions": "8-10", "default": "-2147483648",
- "about": "32-bit bitfield to represent authorized operations for this cluster." }
+ "about": "32-bit bitfield to represent authorized operations for this cluster." },
+ { "name": "FromKRaftController", "type": "bool", "versions": "13+", "default": "false",
+ "taggedVersions": "13+", "tag": 0, "about": "Whether the response was sent back from a KRaft controller." }
]
} |
DirectToKRaftControllerQuorum Handling Matrix
...
KRaft Controller MetadataRequest
When sending a METADATA request to the controller, the following request fields must be set to false:
- AllowAutoTopicCreation
- IncludeClusterAuthorizedOperations
- IncludeTopicAuthorizedOperations
If any of them are set to true, an INVALID_REQUEST MetadataResponse will be returned.
The controller will return information about the specified topics, or about all topics if requested.
The client making the request must have DESCRIBE permission on the CLUSTER resource.
KRaft Controller MetadataResponse
The KRaft controller MetadataResponse will always set:
- FromKRaftController to true
- ClusterId to the Kafka cluster ID
- The ControllerId to the true Raft leader ID
...
producers or consumers.
The choice to communicate directly with the kcontroller quorum should not be taken lightly. In some cases, this bypasses safety checks built into the system. For example, when using an incrementalAlterConfigs
operation to alter a broker configuration, normally the configuration change will be validated on the broker side first. However, when we send the RPC to the controller quorum directly, this validation step does not occur, since the broker is not involved.
In order to make it clear what is going on, communicating directly with the controller quorum will require special configurations and command-line flags. If these are not passed, the communication will not be allowed. Similarly, we will not be able to talk to brokers when using these configurations and flags.
Controller Registration
Once after starting up, Kafka controllers will register themselves with the active controller. This registration will include information about the endpoints which they possess, as well as information about whether they are ready to perform zk migration, and a randomly generated UUID uniquely identifying the specific incarnation of the controller. The registration will be persisted in the metadata log as hard state.
Each controller will check that the controller registration for its ID is as expected. If it is not, it will re-register. It examines the registration information found in the metadata log. This check is necessary to fix cases where a delayed message from an older incarnation of controller N somehow arrives later than a more recent registration for controller N. Although we expect this to be quite rare, it is possible.
Security
From the perspective of security, nothing is changing. It is already possible for custom clients to send operations directly to the controller. The only new ability we are adding is the ability to get back metadata responses. And the information they contain is already present in the MetadataResponses returned from the brokers.
We will continue to enforce access controls on all operations performed by the controller, by means of the Authorizer system. We also continue to recommend that users not be given direct network access to kcontrollers – for example, by putting them on a separate network, or by setting up a firewall.
Public Interfaces
bootstrap.controllers configuration
There will be a new AdminClient
configuration, bootstrap.controllers
. This configuration contains a comma-separated series of hostname:port entries. When this configuration is specified, the AdminClient will talk directly to the controller quorum and the brokers will not be involved.
KafkaProducer
and KafkaConsumer
will not support bootstrap.controllers.
Only AdminClient
will support it.
It is an error to set both bootstrap.controllers
and bootstrap.servers
. Only one can be set at a time. It is also an error to include broker endpoints in --bootstrap-controller
. If we contact a broker via this mechanism, the command will fail.
Just as with bootstrap.servers
, the supplied server list doesn't need to be exhaustive. As long as we can contact one of the provided controllers the RPC can proceed.
Command-line Changes
New Arguments
The following command-line tools will get a new --bootstrap-controller
argument:
- kafka-acls.sh
- kafka-cluster.sh
- kafka-configs.sh
- kafka-delegation-tokens.sh
- kafka-features.sh
- kafka-metadata-quorum.sh
kafka-metadata-shell.sh
- kafka-reassign-partitions.sh
When the --bootstrap-controller
argument is used --bootstrap-servers
must not be specified.
The --bootstrap-controller
flag will set the bootstrap.controllers
configuration described above. It will also clear the bootstrap.servers
configuration if that has been set in some other way (for example, via a configuration file provided to the command-line tool).
The --bootstrap-controller
flag will be documented as follows:
Code Block |
---|
--bootstrap-controller CONTROLLERS
A comma-separted list of bootstrap.controllers that can be supplied instead of bootstrap-servers.
This is useful for administrators who wish to bypass the brokers. |
Note that it is not necessary to specify the controller IDs when using --bootstrap-controller
.
Here is an example --bootstrap-controller
usage:
Code Block |
---|
./bin/kafka-cluster.sh cluster-id --bootstrap-controller example.com:9090,example2.com:9090,example3.com:9090 |
Changes to kafka-metadata-shell.sh
The metadata shell will now have these arguments:
Code Block |
---|
The Apache Kafka metadata tool
positional arguments:
command The command to run.
optional arguments:
-h, --help show this help message and exit
--directory DIRECTORY, -d DIRECTORY
The __cluster_metadata-0 directory to read.
--bootstrap-controller CONTROLLERS, -q CONTROLLERS
The bootstrap.controllers, used to communicate directly with the metadata quorum.
--config CONFIG Path to a property file containing a Kafka configuration |
Note that:
- The
--snapshot
argument has been replaced by a--directory
argument that reads the whole directory, not just a snapshot file - There is no need for a
--cluster-id
flag, since we will query the controller for its cluster ID prior to creating the Raft client. - There is now a
--config
argument which can be used to pass a configuration file.
Since kafka-metadata-shell.sh
is at an "evolving" level of interface stability, these changes should be OK to make without a deprecation period.
New Errors
There will be a new MISMATCHED_ENDPOINT_TYPE
error.
Code Block |
---|
MISMIATCHED_ENDPOINT_TYPE([next], "The request was sent to an endpoint of the wrong type.", MismatchedEndpointTypeException::new), |
There will also be a new UNSUPPORTED_ENDPOINT_TYPE
error.
Code Block |
---|
UNSUPPORTED_ENDPOINT_TYPE([next], "This endpoint type is not supported yet.", UnsupportedEndpointTypeException::new), |
There will also be a new UNKNOWN_CONTROLLER_ID error.
Code Block |
---|
UNKNOWN_CONTROLLER_ID([next], "This controller ID is not known.", UnknownControllerIdException::new), |
DescribeCluster Changes
When bootstrap.controller
is set, the AdminClient will use DescribeClusterRequest
rather than MetadataRequest
to obtain the cluster toplolgy.
We will add a new EndpointType
field to DescribeClusterRequest
. It will be set to 2 (controllers) when bootstrap.controller
is in use. Otherwise, it will be set to 1 (brokers).
If the provided endpoint type does not match the actual endpoint type, we will return the MISMATCHED_ENDPOINT_TYPE
error. So, for example, sending a request to a broker with an EndpointType
of 2 (controller) will result in this error.
Code Block |
---|
diff --git a/clients/src/main/resources/common/message/DescribeClusterRequest.json b/clients/src/main/resources/common/message/DescribeClusterRequest.json
index 192e4d87d44..d1a4f432533 100644
--- a/clients/src/main/resources/common/message/DescribeClusterRequest.json
+++ b/clients/src/main/resources/common/message/DescribeClusterRequest.json
@@ -18,10 +18,12 @@
"type": "request",
"listeners": ["zkBroker", "broker"],
"name": "DescribeClusterRequest",
- "validVersions": "0",
+ "validVersions": "0-1",
"flexibleVersions": "0+",
"fields": [
{ "name": "IncludeClusterAuthorizedOperations", "type": "bool", "versions": "0+",
- "about": "Whether to include cluster authorized operations." }
+ "about": "Whether to include cluster authorized operations." },
+ { "name": "EndpointType", "type": "int8", "versions": "1+", "default": "1",
+ "about": "The endpoint type to describe. 1=brokers, 2=controllers." }
]
} |
There will be a corresponding new version of DescribeClusterResponse
.
Code Block |
---|
diff --git a/clients/src/main/resources/common/message/DescribeClusterResponse.json b/clients/src/main/resources/common/message/DescribeClusterResponse.json
index 1cd26c3d3c1..d774137d080 100644
--- a/clients/src/main/resources/common/message/DescribeClusterResponse.json
+++ b/clients/src/main/resources/common/message/DescribeClusterResponse.json
@@ -17,7 +17,7 @@
"apiKey": 60,
"type": "response",
"name": "DescribeClusterResponse",
- "validVersions": "0",
+ "validVersions": "0-1",
"flexibleVersions": "0+",
"fields": [
{ "name": "ThrottleTimeMs", "type": "int32", "versions": "0+",
@@ -26,20 +26,22 @@
"about": "The top-level error code, or 0 if there was no error" },
{ "name": "ErrorMessage", "type": "string", "versions": "0+", "nullableVersions": "0+", "default": "null",
"about": "The top-level error message, or null if there was no error." },
+ { "name": "EndpointType", "type": "int8", "versions": "1+", "default": "1",
+ "about": "The endpoint type. 1=brokers, 2=controllers." }, |
The EndpointType field will still be populated when there is an error, such as a MISMATCHED_ENDPOINT_TYPE
error.
When EndpointType
is "controllers", the ControllerId field will be set to the ID of the current active kcontroller, or -1 if there is no current active kcontroller.
If the MetadataVersion is too old to support controller registrations, and EndpointType was passed as "controllers," the controller will return UNSUPPORTED_ENDPOINT_TYPE
. This reflects the fact that it doesn't have metadata about the controller endpoints in these older MetadataVersions.
ControllerRegistrationRequest / Response
There will be a new ControllerRegistrationRequest. All controllers will send this to the active controller.
Code Block |
---|
{
"apiKey": ...,
"type": "request",
"name": "ControllerRegistrationRequest",
"validVersions": "0",
"flexibleVersions": "0+",
"fields": [
{ "name": "ControllerId", "type": "int32", "versions": "0+",
"about": "The ID of the controller to register." },
{ "name": "ActiveControllerEpoch", "type": "int32", "versions": "0+",
"about": "The epoch of the current active controller." },
{ "name": "IncarnationId", "type": "uuid", "versions": "0+",
"about": "The controller incarnation ID, which is unique to each process run." },
{ "name": "ZkMigrationReady", "type": "bool", "versions": "0+",
"about": "Set if the required configurations for ZK migration are present." },
{ "name": "Listeners", "type": "[]Listener",
"about": "The listeners of this controller", "versions": "0+", "fields": [
{ "name": "Name", "type": "string", "versions": "0+", "mapKey": true,
"about": "The name of the endpoint." },
{ "name": "Host", "type": "string", "versions": "0+",
"about": "The hostname." },
{ "name": "Port", "type": "uint16", "versions": "0+",
"about": "The port." },
{ "name": "SecurityProtocol", "type": "int16", "versions": "0+",
"about": "The security protocol." }
]
},
{ "name": "Features", "type": "[]Feature",
"about": "The features on this controller", "versions": "0+", "fields": [
{ "name": "Name", "type": "string", "versions": "0+", "mapKey": true,
"about": "The feature name." },
{ "name": "MinSupportedVersion", "type": "int16", "versions": "0+",
"about": "The minimum supported feature level." },
{ "name": "MaxSupportedVersion", "type": "int16", "versions": "0+",
"about": "The maximum supported feature level." }
]
}
]
} |
and a corresponding ControllerRegistrationResponse:
Code Block |
---|
{
"apiKey": ...,
"type": "response",
"name": "ControllerRegistrationResponse",
"validVersions": "0",
"flexibleVersions": "0+",
"fields": [
{ "name": "ErrorCode", "type": "int16", "versions": "0+",
"about": "The response error code." },
{ "name": "ErrorMessage", "type": "string", "nullableVersions": "0+", "versions": "0+",
"about": "The response error message, or null if there was no error." }
]
} |
The active controller will persist all registrations that are sent in with the correct permissions (CLUSTERACTION on CLUSTER). If the controller is not active, we'll send back a NOT_CONTROLLER error.
The active controller may also return STALE_CONTROLLER_EPOCH if the wrong epoch was passed.
ApiVersionsResponse
The ZkMigrationReady field in ApiVersionsResponse is now deprecated, and won't be filled out.
Code Block |
---|
diff --git a/clients/src/main/resources/common/message/ApiVersionsResponse.json b/clients/src/main/resources/common/message/ApiVersionsResponse.json
index 9fda953e10e..eb449f07c54 100644
--- a/clients/src/main/resources/common/message/ApiVersionsResponse.json
+++ b/clients/src/main/resources/common/message/ApiVersionsResponse.json
@@ -70,8 +70,6 @@
"about": "The cluster-wide finalized min version level for the feature."}
]
},
- { "name": "ZkMigrationReady", "type": "bool", "versions": "3+", "taggedVersions": "3+",
- "tag": 3, "ignorable": true, "default": "false",
- "about": "Set by a KRaft controller if the required configurations for ZK migration are present" }
+ { "name": "ZkMigrationReady", "type": "deprecated", "versions": "3+", "taggedVersions": "3+", "tag": 3 }
]
} |
RegisterControllerRecord
The data from the registration request will be written to a new RegisterControllerRecord.
Code Block |
---|
{
"apiKey": ...,
"type": "metadata",
"name": "RegisterControllerRecord",
"validVersions": "0+",
"flexibleVersions": "0+",
"fields": [
{ "name": "ControllerId", "type": "int32", "versions": "0+",
"about": "The controller id." },
{ "name": "IncarnationId", "type": "uuid", "versions": "0+",
"about": "The incarnation ID of the controller process" },
{ "name": "ZkMigrationReady", "type": "boolean", "versions": "0+",
"about": "Set if the required configurations for ZK migration are present." },
{ "name": "EndPoints", "type": "[]ControllerEndpoint", "versions": "0+",
"about": "The endpoints that can be used to communicate with this controller.", "fields": [
{ "name": "Name", "type": "string", "versions": "0+", "mapKey": true,
"about": "The name of the endpoint." },
{ "name": "Host", "type": "string", "versions": "0+",
"about": "The hostname." },
{ "name": "Port", "type": "uint16", "versions": "0+",
"about": "The port." },
{ "name": "SecurityProtocol", "type": "int16", "versions": "0+",
"about": "The security protocol." }
]},
{ "name": "Features", "type": "[]ControllerFeature",
"about": "The features on this controller", "versions": "0+", "fields": [
{ "name": "Name", "type": "string", "versions": "0+", "mapKey": true,
"about": "The feature name." },
{ "name": "MinSupportedVersion", "type": "int16", "versions": "0+",
"about": "The minimum supported feature level." },
{ "name": "MaxSupportedVersion", "type": "int16", "versions": "0+",
"about": "The maximum supported feature level." }
]}
]
} |
At the moment, there will be no incremental version of this record, since there is no equivalent to broker fencing and unfencing on the controller. There is also no epoch – the incarnation ID, chosen by the controller itself, is what we use.
AdminClient Changes
As described above, AdminClient will now support bootstrap.controller
in addition to bootstrap.server
. The following APIs will be supported:
API | Notes |
---|---|
alterConfigs | |
createAcls | |
deleteAcls | |
describeCluster | |
describeAcls | |
describeConfigs | |
describeClientQuotas | |
alterClientQuotas | |
incrementalAlterConfigs | This can be used to alter log4j settings on inactive controllers. That is the one case where we don't send the RPC to the active controller. |
describeDelegationToken | |
electLeaders | |
alterPartitionReassignments | |
listPartitionReassignments | |
describeClientQuotas | |
describeUserScramCredentials | |
describeFeatures | |
updateFeatures | |
describeMetadataQuorum | |
unregisterBroker | this affects brokers, not controllers |
When an unsupported API is used with bootstrap.controller
, UnsupportedEndpointType
is returned as an error.
Controller Changes
Fix compatibility gates
Previously, the controller used ApiVersionsResponse messages obtained from the other controllers to determine:
- whether all controllers in the cluster supported a proposed change to the MetadataVersion
- During a ZK migration, whether all controllers in the cluster were ready to exit premigration
This method was flawed, because it relied on the idea that controllers were always connected to each other. In reality, after the Raft election concludes, the only communication that takes place is inactive controllers connecting to the active controller. The other connections are gradually closed, and we lose information about those other nodes.
With the introduction of controller registrations, the active controller will simply use this information instead. This will be more accurate than the old system.
New APIs
The following RPCs will now be supported on the controller:
API | Notes |
---|---|
DESCRIBE_CONFIGS | Even on inactive controllers, this can be used to alter the log4j settings dynamically. |
DESCRIBE_CLUSTER | As described above, DESCRIBE_CLUSTER will be used by AdminClient for bootstrapping. |
REGISTER_CONTROLLER |
Compatibility, Deprecation, and Migration Plan
Client Compatibility Matrix
pre-KIP-919 broker | post-KIP-919 broker | pre-KIP-919 controller | post KIP-919 controller | |
---|---|---|---|---|
bootstrap.server | success | success | Fails because METADATA request is not supported. | Fails because METADATA request is not supported. |
bootstrap.controller | Fails because DESCRIBE_CLUSTER returns MISMATCHED_ENDPOINT | Fails because DESCRIBE_CLUSTER v1 is not supported. | Fails because DESCRIBE_CLUSTER v1 is not supported. | If the metadata version is too old to support controller registrations, UNSUPPORTED_ENDPOINT_TYPE. Otherwise, success. |
Controller Registration MetadataVersion Gate
Controller registrations will be gated behind a new metadata version. The controllers will not attempt to register themselves if the current metadata version is too old.
Rejected Alternatives
bootstrap.controllers versus direct.to.controller configuration
Rather than having a bootstrap.controllers
configuration, we could have a separate configuration like direct.to.controller
and put the controller servers into bootstrap.servers
. Similarly, we could reuse --bootstrap-server
erather than adding --bootstrap-controller
.
We decided to go with the scheme proposed above to make it clearer when a tool was going directly to the controller. This also makes it clearer which command-line tools have this capability and which do not.
For example, kafka-console-consumer.sh
does not have the capability to go direct to the controller, since the controller does not handle produces. Therefore, it's intuitive that kafka-console-consumer.sh
lacks the --bootstrap-controller
flag.
Another issue is that in the future, we may want to support using the controllers as bootstrap servers for the brokers. The scheme above leaves the door open for this, whereas a scheme that reused existing configurations would not.
Extending MetadataRequest instead of using DescribeClusterRequest
Instead of extending DescribeClusterRequest, we could have extended MetadataRequest so that the AdminClient could send that to the controllers. However, MetadataRequest doesn't return a top-level error code. So we cannot cleanly handle the many compatibility scenarios described above. We would have no choice but to simply terminate the TCP connection, which would leave the user guessing what the problem was.
Integration with Raft
When we implement dynamic KRaft quorum reconfiguration, we will want to store information about Raft voters in the Raft log itself. This will allow the quorum to change and grow beyond the initial static configuration. So it's reasonable to ask if there is some overlap between the reconfiguration project and this one.
However, I think these two KIPs should be separate. The registration information QuorumController cares about is different than what Raft will care about. For example, Raft will not care about the currently active features, or whether ZK migration is ready.
Future Work
Bootstrap-to-broker
In the future, we might want to allow the controllers to be used as bootstrap servers for the brokers. This would be helpful, for example, in cases where a plugin running on the controller itself wanted to create a consumer or producer, without hard-coding broker addresses in the configuration.
This is a separate use-case from the direct-to-controller one, so probably needs different configuration.
One major problem is what broker endpoints to return. Perhaps we could always return the inter-broker endpoints in the response. However, it's unclear how the client should proceed when the controller has different security settings than the selected broker endpoints. This might require more complex client configuration.
Better API for returning topic data
MetadataRequest has many limitations.
- It unconditionally returns broker information, even when we don't care about that (such as in AdminClient)
- Its response does not incorporate a top-level error code, so there is no reasonable way to indicate failure
- All requested topics are returned in one big lump, which makes the garbage collector choke in larger clusters
In the future, we should have a better API for listing topic data, that does not have these problems. This would also give us a clean way to implement Admin#listTopics
when using bootstrap.controller
AdminClient Implementation Notes
When talking to the controllers directly, the AdminClient needs to always send its RPCs to the active controller.
There is one exception: configuring ephemeral log4j settings with incrementalAlterConfigs must be done by sending them to the specified controller node.
Compatibility, Deprecation, and Migration Plan
From a security and isolation point of view, we continue to recommend putting KRaft controllers on a separate network from Kafka clients. This is always a good idea in order to have the best security and isolation.
From a competiability point of view, there should be no impact since current controllers don't handle MetadataRequest.
Only new AdminClient implementations with KIP-919 will be able to take advantage of this feature. When attempting to talk to controllers without KIP-919 support, the calls will complete with UnsupportedVersionException, reflecting the fact that the controllers don't support KIP-919.
Rejected Alternatives
bootstrap.controllers versus direct.to.controller configuration
Rather than having a bootstrap.controllers
configuration, we could have a separate configuration like direct.to.controller
and put the controller servers into bootstrap.servers
. Similarly, we could reuse --bootstrap-server
erather than adding --bootstrap-controllers
.
We decided to go with the scheme proposed above to make it clearer when a tool was going directly to the controller. This also makes it clearer which command-line tools have this capability and which do not.
For example, kafka-console-consumer.sh
does not have the capability to go direct to the controller, since the controller does not handle produces. Therefore, it's intuitive that kafka-console-consumer.sh
lacks the --bootstrap-controllers
flag.
Another issue is that in the future, we may want to support using the controllers as bootstrap servers for the brokers. The scheme above leaves the door open for this, whereas a scheme that reused existing configurations would not.
Future Work
In the future, we might want to allow the controllers to be used as bootstrap servers for the brokers. This would be helpful, for example, in cases where a plugin running on the controller itself wanted to create a consumer or producer, without hard-coding broker addresses in the configuration.
This is a separate use-case from the direct-to-controller one, so probably needs different configuration.
One major problem is what broker endpoints to return. Perhaps we could always return the inter-broker endpoints in the response. However, it's unclear how the client should proceed when the controller has different security settings than the selected broker endpoints. This might require more complex client configuration .