...
Maven users will need to add the following dependency to their pom.xml
for this component:
...
...
See File for more options as all the options from File is inherited.
...
...
Absolute path is not supported.
...
title | Consuming from remote FTP server |
---|
...
Camel 2.16 will translate absolute paths to relative ones by trimming all leading slashes from directoryname
. There'll be WARN message printed in the logs.
...
Make sure you read the section titled Default when consuming files further below for details related to consuming files.
URI format
...
Where directoryname represents the underlying directory. The directory name is a relative path. Absolute path's is paths are not supported. The relative path can contain nested folders, such as /inbox/us.
If no username is provided, then anonymous
login is attempted using no password.
If no port number is provided, Camel will provide default values according to the protocol (ftp = 21, sftp = 22, ftps = 2222).
You can append query options to the URI in the following format, ?option=value&option=value&...
This component uses two different libraries for the actual FTP work. FTP and FTPS uses Apache Commons Net while SFTP uses JCraft JSCH.
The FTPS component is only available in Camel 2.2 or newer.
FTPS (also known as FTP Secure) is an extension to FTP that adds support for the Transport Layer Security (TLS) and the Secure Sockets Layer (SSL) cryptographic protocols.
URI Options
The options below are exclusive for the FTP component.
...
For Camel versions before Camel 2.16, the directoryName must exist already as this component does not support the autoCreate
option (which the file component does). The reason is that its the FTP administrator (FTP server) task to properly setup user accounts, and home directories with the right file permissions etc.
For Camel 2.16, autoCreate
option is supported. When consumer starts, before polling is scheduled, there's additional FTP operation performed to create the directory configured for endpoint. The default value for autoCreate
is true
.
If no username is provided, then anonymous
login is attempted using no password.
If no port number is provided, Camel will provide default values according to the protocol (ftp = 21, sftp = 22, ftps = 2222).
You can append query options to the URI in the following format, ?option=value&option=value&...
This component uses two different libraries for the actual FTP work. FTP and FTPS uses Apache Commons Net while SFTP uses JCraft JSCH.
The FTPS component is only available in Camel 2.2 or newer.
FTPS (also known as FTP Secure) is an extension to FTP that adds support for the Transport Layer Security (TLS) and the Secure Sockets Layer (SSL) cryptographic protocols.
URI Options
The options below are exclusive for the FTP component.
...
See File for more options as all the options from File is
...
inherited.
...
Name | Default Value | Description |
---|---|---|
|
| Specifies the username to use to log in to the remote file systen. |
|
| Specifies the password to use to log in to the remote file system. |
| null | Camel 2.15.2: Specified the account to use to login to the remote FTP server (only for FTP and FTP Secure) |
|
| Specifies the file transfer mode, BINARY or ASCII. Default is ASCII ( |
|
| Camel 2.2: Whether or not to disconnect from remote FTP server right after use. Can be used for both consumer and producer. Disconnect will only disconnect the current connection to the FTP server. If you have a consumer which you want to stop, then you need to stop the consumer/route instead. |
|
| When consuming, a local work directory can be used to store the remote file content directly in local files, to avoid loading the content into memory. This is beneficial, if you consume a very big remote file and thus can conserve memory. See below for more details. |
|
| FTP and FTPS only: Specifies whether to use passive mode connections. Default is active mode ( |
|
| FTPS only: Sets the underlying security protocol. The following values are defined: |
|
| Camel 2.4: FTPS only: Whether or not to disable using default values for |
|
| Camel 2.11: Whether the FTP consumer should download the file. If this option is set to |
streamDownload | false | Camel 2.11: Whether the consumer should download the entire file up front, the default behavior, or if it should pass an InputStream read from the remote resource rather than an in-memory array as the in body of the Camel Exchange. This option is ignored if download is false or is localWorkDirectory is provided. This option is useful for working with large remote files. |
|
| Camel 2.4: FTPS only: Will by default use option |
|
| Camel 2.4: FTPS only: This option specifies the buffer size of the secure data channel. If option |
|
| FTPS only: Sets the security mode(implicit/explicit). Default is explicit ( |
|
| SFTP only: Sets the |
useUserKnownHostsFile | true | SFTP onlly: Camel 2.18: If knownHostFile has not been explicit configured then use the host file from System.getProperty(user.home)/.ssh/known_hosts |
|
| SFTP only: Camel 2.11.1: Sets the |
|
| SFTP only: Camel 2.12.0: Sets the Java KeyPair for SSH public key authentication, it supports DSA or RSA keys. |
|
| SFTP only: Set the private key file to that the SFTP endpoint can do private key verification. |
|
| SFTP only: Camel 2.11.1: Set the private key file (loaded from classpath by default) to that the SFTP endpoint can do private key verification. |
|
| SFTP only: Camel 2.11.1: Set the private key as byte[] to that the SFTP endpoint can do private key verification. |
|
| SFTP only: Deprecated: use |
|
...
class | confluenceTableSmall |
---|
...
Name
...
Default Value
...
Description
...
username
...
null
...
Specifies the username to use to log in to the remote file systen.
...
password
...
null
...
Specifies the password to use to log in to the remote file system.
...
account
...
binary
...
false
...
Specifies the file transfer mode, BINARY or ASCII. Default is ASCII (false
).
...
disconnect
...
false
...
Camel 2.2: Whether or not to disconnect from remote FTP server right after use. Can be used for both consumer and producer. Disconnect will only disconnect the current connection to the FTP server. If you have a consumer which you want to stop, then you need to stop the consumer/route instead.
...
localWorkDirectory
...
null
...
When consuming, a local work directory can be used to store the remote file content directly in local files, to avoid loading the content into memory. This is beneficial, if you consume a very big remote file and thus can conserve memory. See below for more details.
...
passiveMode
...
false
...
FTP and FTPS only: Specifies whether to use passive mode connections. Default is active mode (false
).
...
securityProtocol
...
TLS
...
FTPS only: Sets the underlying security protocol. The following values are defined:
TLS
: Transport Layer Security
SSL
: Secure Sockets Layer
...
disableSecureDataChannelDefaults
...
false
...
Camel 2.4: FTPS only: Whether or not to disable using default values for execPbsz
and execProt
when using secure data transfer. You can set this option to true
if you want to be in full control what the options execPbsz
and execProt
should be used.
...
download
...
true
...
Camel 2.11: Whether the FTP consumer should download the file. If this option is set to false
, then the message body will be null
, but the consumer will still trigger a Camel Exchange that has details about the file such as file name, file size, etc. It's just that the file will not be downloaded.
...
streamDownload
...
false
...
Camel 2.11: Whether the consumer should download the entire file up front, the default behavior, or if it should pass an InputStream read from the remote resource rather than an in-memory array as the in body of the Camel Exchange. This option is ignored if download is false or is localWorkDirectory is provided. This option is useful for working with large remote files.
...
execProt
...
null
...
Camel 2.4: FTPS only: Will by default use option P
if secure data channel defaults hasn't been disabled. Possible values are:
C
: Clear
S
: Safe (SSL protocol only)
E
: Confidential (SSL protocol only)
P
: Private
...
execPbsz
...
null
...
Camel 2.4: FTPS only: This option specifies the buffer size of the secure data channel. If option useSecureDataChannel
has been enabled and this option has not been explicit set, then value 0
is used.
...
isImplicit
...
false
...
FTPS only: Sets the security mode(implicit/explicit). Default is explicit (false
).
...
knownHostsFile
...
null
...
SFTP only: Sets the known_hosts
file, so that the SFTP endpoint can do host key verification.
...
| SFTP only: Camel 2.11.1: |
...
Set the private key file passphrase to that the SFTP endpoint can do |
...
private key verification. |
...
|
| SFTP only: Camel 2.10.7, 2.11.2,2.12.0: |
...
privateKeyFile
...
null
...
SFTP only: Set the private key file to that the SFTP endpoint can do private key verification.
...
privateKeyUri
...
null
...
SFTP only: Camel 2.11.1: Set the private key file (loaded from classpath by default) to that the SFTP endpoint can do private key verification.
...
privateKey
...
null
...
SFTP only: Camel 2.11.1: Set the private key as byte[] to that the SFTP endpoint can do private key verification.
...
privateKeyFilePassphrase
...
null
...
SFTP only: Deprecated: use privateKeyPassphrase
instead. Set the private key file passphrase to that the SFTP endpoint can do private key verification.
...
privateKeyPassphrase
...
null
...
SFTP only: Camel 2.11.1: Set the private key file passphrase to that the SFTP endpoint can do private key verification.
...
preferredAuthentications
...
null
...
SFTP only: Camel 2.10.7, 2.11.2,2.12.0: set the preferred authentications which SFTP endpoint will used. Some example include:password,publickey. If not specified the default list from JSCH will be used.
...
ciphers
...
null
...
Camel 2.8.2, 2.9: SFTP only Set a comma separated list of ciphers that will be used in order of preference. Possible cipher names are defined by JCraft JSCH. Some examples include: aes128-ctr,aes128-cbc,3des-ctr,3des-cbc,blowfish-cbc,aes192-cbc,aes256-cbc. If not specified the default list from JSCH will be used.
...
fastExistsCheck
...
false
...
Camel 2.8.2, 2.9: If set this option to be true, camel-ftp will use the list file directly to check if the file exists. Since some FTP server may not support to list the file directly, if the option is false, camel-ftp will use the old way to list the directory and check if the file exists. Note from Camel 2.10.1 onwards this option also influences readLock=changed
to control whether it performs a fast check to update file information or not. This can be used to speed up the process if the FTP server has a lot of files.
...
strictHostKeyChecking
...
no
...
SFTP only: Camel 2.2: Sets whether to use strict host key checking. Possible values are: no
, yes
and ask
. ask
does not make sense to use as Camel cannot answer the question for you as its meant for human intervention. Note: The default in Camel 2.1 and below was ask
.
...
maximumReconnectAttempts
...
3
...
Specifies the maximum reconnect attempts Camel performs when it tries to connect to the remote FTP server. Use 0 to disable this behavior.
...
reconnectDelay
...
1000
...
Delay in millis Camel will wait before performing a reconnect attempt.
...
connectTimeout
...
10000
...
Camel 2.4: Is the connect timeout in millis. This corresponds to using ftpClient.connectTimeout
for the FTP/FTPS. For SFTP this option is also used when attempting to connect.
...
soTimeout
...
null
...
FTP and FTPS Only: Camel 2.4: Is the SocketOptions.SO_TIMEOUT
value in millis. A good idea is to configure this to a value such as 300000 (5 minutes) to not hang a connection. On SFTP this option is set as timeout on the JSCH Session instance. Notice this option applies to all of them ftp/
Also SFTP from Camel 2.14.3/2.15.3/2.16 onwards.
...
timeout
...
30000
...
FTP and FTPS Only: Camel 2.4: Is the data timeout in millis. This corresponds to using ftpClient.dataTimeout
for the FTP/FTPS. For SFTP there is no data timeout.
...
throwExceptionOnConnectFailed
...
false
...
Camel 2.5: Whether or not to thrown an exception if a successful connection and login could not be establish. This allows a custom pollStrategy
to deal with the exception, for example to stop the consumer or the likes.
...
siteCommand
...
null
...
FTP and FTPS Only: Camel 2.5: To execute site commands after successful login. Multiple site commands can be separated using a new line character (\n). Use help site
to see which site commands your FTP server supports.
...
stepwise
...
true
...
Camel 2.6: Whether or not stepwise traversing directories should be used or not. Stepwise means that it will CD one directory at a time. See more details below. You can disable this in case you can't use this approach.
...
separator
...
UNIX
...
Camel 2.6: Dictates what path separator char to use when uploading files. Auto
= Use the path provided without altering it. UNIX
= Use unix style path separators. Windows
= Use Windows style path separators.
Since Camel 2.15.2: The default value is changed to UNIX style path, before Camel 2.15.2: The default value is Auto.
...
chmod
...
null
...
SFTP Producer Only: Camel 2.9: Allows you to set chmod on the stored file. For example chmod=640
.
...
compression
...
0
...
SFTP Only: Camel 2.8.3/2.9: To use compression. Specify a level from 1 to 10. Important: You must manually add the needed JSCH zlib JAR to the classpath for compression support.
...
receiveBufferSize
...
ftpClient
...
null
...
FTP and FTPS Only: Camel 2.1: Allows you to use a custom org.apache.commons.net.ftp.FTPClient
instance.
...
ftpClientConfig
...
null
...
FTP and FTPS Only: Camel 2.1: Allows you to use a custom org.apache.commons.net.ftp.FTPClientConfig
instance.
...
serverAliveInterval
...
0
...
SFTP Only: Camel 2.8 Allows you to set the serverAliveInterval of the sftp session
...
serverAliveCountMax
...
1
...
SFTP Only: Camel 2.8 Allows you to set the serverAliveCountMax of the sftp session
...
ftpClient.trustStore.file
...
null
...
FTPS Only: Sets the trust store file, so that the FTPS client can look up for trusted certificates.
...
ftpClient.trustStore.type
...
JKS
...
FTPS Only: Sets the trust store type.
...
ftpClient.trustStore.algorithm
...
SunX509
...
FTPS Only: Sets the trust store algorithm.
...
ftpClient.trustStore.password
...
null
...
FTPS Only: Sets the trust store password.
...
ftpClient.keyStore.file
...
null
...
FTPS Only: Sets the key store file, so that the FTPS client can look up for the private certificate.
...
ftpClient.keyStore.type
...
JKS
...
FTPS Only: Sets the key store type.
...
ftpClient.keyStore.algorithm
...
SunX509
...
FTPS Only: Sets the key store algorithm.
...
ftpClient.keyStore.password
...
null
...
FTPS Only: Sets the key store password.
...
ftpClient.keyStore.keyPassword
...
null
...
FTPS Only: Sets the private key password.
...
sslContextParameters
...
null
...
FTPS Only: Camel 2.9: Reference to a org.apache.camel.util.jsse.SSLContextParameters
in the Registry. This reference overrides any configured SSL related options on ftpClient as well as the securityProtocol (SSL, TLS, etc.) set on FtpsConfiguration. See Using the JSSE Configuration Utility.
...
proxy
...
null
...
SFTP Only: Camel 2.10.7, 2.11.1: Reference to a com.jcraft.jsch.Proxy
in the Registry. This proxy is used to consume/send messages from the target SFTP host.
...
useList
...
true
...
FTP/FTPS Only: Camel 2.12.1: Whether the consumer should use FTP LIST command to retrieve directory listing to see which files exists. If this option is set to false
, then stepwise=false
must be configured, and also fileName
must be configured to a fixed name, so the consumer knows the name of the file to retrieve. When doing this only that single file can be retrieved. See further below for more details.
...
ignoreFileNotFoundOrPermissionError
...
false
...
Camel 2.12.1: Whether the consumer should ignore when a file was attempted to be retrieved but did not exist (for some reason), or failure due insufficient file permission error. Camel 2.14.2: This option now applies to directories as well.
...
set the preferred authentications which SFTP endpoint will used. Some example include:password,publickey. If not specified the default list from JSCH will be used. | ||
|
| Camel 2.8.2, 2.9: SFTP only Set a comma separated list of ciphers that will be used in order of preference. Possible cipher names are defined by JCraft JSCH. Some examples include: aes128-ctr,aes128-cbc,3des-ctr,3des-cbc,blowfish-cbc,aes192-cbc,aes256-cbc. If not specified the default list from JSCH will be used. |
|
| Camel 2.8.2, 2.9: If set this option to be true, camel-ftp will use the list file directly to check if the file exists. Since some FTP server may not support to list the file directly, if the option is false, camel-ftp will use the old way to list the directory and check if the file exists. Note from Camel 2.10.1 onwards this option also influences |
|
| SFTP only: Camel 2.2: Sets whether to use strict host key checking. Possible values are: |
|
| Specifies the maximum reconnect attempts Camel performs when it tries to connect to the remote FTP server. Use 0 to disable this behavior. |
|
| Delay in millis Camel will wait before performing a reconnect attempt. |
|
| Camel 2.4: Is the connect timeout in millis. This corresponds to using |
|
| FTP and FTPS Only: Camel 2.4: Is the Also SFTP from Camel 2.14.3/2.15.3/2.16 onwards. From Camel 2.16 onwards the default is 300000 (300 sec). |
|
| FTP and FTPS Only: Camel 2.4: Is the data timeout in millis. This corresponds to using |
|
| Camel 2.5: Whether or not to thrown an exception if a successful connection and login could not be establish. This allows a custom |
|
| FTP and FTPS Only: Camel 2.5: To execute site commands after successful login. Multiple site commands can be separated using a new line character (\n). Use |
|
| Camel 2.6: Whether or not stepwise traversing directories should be used or not. Stepwise means that it will CD one directory at a time. See more details below. You can disable this in case you can't use this approach. |
|
| Camel 2.6: Dictates what path separator char to use when uploading files. Since Camel 2.15.2: The default value is changed to UNIX style path, before Camel 2.15.2: The default value is |
|
| SFTP Producer Only: Camel 2.9: Allows you to set chmod on the stored file. For example |
| 0 | SFTP Only: Camel 2.8.3/2.9: To use compression. Specify a level from 1 to 10. Important: You must manually add the needed JSCH zlib JAR to the classpath for compression support. |
| 32768 | FTP/FTPS Only: Camel 2.15.1: The buffer size for downloading files. The default size is 32kb. |
|
| FTP and FTPS Only: Camel 2.1: Allows you to use a custom |
|
| FTP and FTPS Only: Camel 2.1: Allows you to use a custom |
ftpClientConfig.XXX | FTP and FTPS Only: To configure various options on the FTPClient instance from the uri. For example: ftpClientConfig.receiveDataSocketBufferSize=8192&ftpClientConfig.sendDataSocketBufferSize=8192 | |
|
| SFTP Only: Camel 2.8 Allows you to set the serverAliveInterval of the sftp session |
|
| SFTP Only: Camel 2.8 Allows you to set the serverAliveCountMax of the sftp session |
|
| FTPS Only: Sets the trust store file, so that the FTPS client can look up for trusted certificates. |
|
| FTPS Only: Sets the trust store type. |
|
| FTPS Only: Sets the trust store algorithm. |
|
| FTPS Only: Sets the trust store password. |
|
| FTPS Only: Sets the key store file, so that the FTPS client can look up for the private certificate. |
|
| FTPS Only: Sets the key store type. |
|
| FTPS Only: Sets the key store algorithm. |
|
| FTPS Only: Sets the key store password. |
|
| FTPS Only: Sets the private key password. |
|
| FTPS Only: Camel 2.9: Reference to a |
|
| SFTP Only: Camel 2.10.7, 2.11.1: Reference to a |
|
| FTP/FTPS Only: Camel 2.12.1: Whether the consumer should use FTP LIST command to retrieve directory listing to see which files exists. If this option is set to |
|
| Camel 2.12.1: Whether the consumer should ignore when a file was attempted to be retrieved but did not exist (for some reason), or failure due insufficient file permission error. Camel 2.14.2: This option now applies to directories as well. |
sendNoop | true | Camel 2.16: Producer only. Whether to send a noop command as a pre-write check before uploading files to the FTP server. This is enabled by default as a validation of the connection is still valid, which allows to silently re-connect to be able to upload the file. However if this causes problems, you can turn this option off. |
jschLoggingLevel | WARN | SFTP Only: Camel 2.15.3/2.16: The logging level to use for JSCH activity logging. As JSCH is verbose at by default at INFO level the threshold is WARN by default. |
bulkRequest | SFTP Only: Camel 2.17.1: Specifies how many requests may be outstanding at any one time. Increasing this value may slightly improve file transfer speed but will increase memory usage. | |
disconnectOnBatchComplete | false | Camel 2.18: Whether or not to disconnect from remote FTP server after a Batch is complete. Can be used for both consumer and producer. Disconnect will only disconnect the current connection to the FTP server. If you have a consumer which you want to stop, then you need to stop the consumer/route instead. |
activePortRange | Camel 2.18: Set the client side port range in active mode. The syntax is: minPort-maxPort. Both port numbers are inclusive, eg 10000-19999 to include all 1xxxx ports. |
...
...
When using the ftpClient.
properties related to SSL with the FTPS component, the trust store
...
accepts all certificates. If you only want trust selective certificates, you have to configure the trust store with the ftpClient.trustStore.xxx
options or by configuring a custom ftpClient
.
When using sslContextParameters
, the trust store is managed by the configuration of the provided SSLContextParameters instance.
You can configure additional options on the ftpClient
and ftpClientConfig
from the URI directly by using the ftpClient.
or ftpClientConfig.
prefix.
For example to set the setDataTimeout
on the FTPClient
to 30 seconds you can do:
...
You can mix and match and have use both prefixes, for example to configure date format or timezones.
...
You can have as many of these options as you like.
...
If you do not like having many and long configuration in the url you can refer to the ftpClient
or ftpClientConfig
to use by letting Camel lookup in the Registry for it.
For example:
...
...
And then let Camel lookup this bean when you use the # notation in the url.
...
More URI options
...
options
...
See File2 as all the options there also applies for this component.
Examples
ftp://someone@someftpserver.com/public/upload/images/holiday2008?password=secret&binary=true
ftp://someoneelse@someotherftpserver.co.uk:12049/reports/2008/password=secret&binary=false
ftp://publicftpserver.com/download
...
...
The FTP consumer (with the same endpoint) does not support concurrency (the backing FTP client is not thread safe).
You can use multiple FTP consumers to poll from different endpoints. It is only a single endpoint that does not support concurrent consumers.
The FTP producer does not have this issue, it supports concurrency.
...
This component is an extension of the File component. So there are more samples and details on the File component page.
Default when consuming files
...
The option readLock can be used to force Camel not to consume files that is are currently in the progress of being written. However, this option is turned off by default, as it requires that the user has write access. See the options table at File2 for more details about read locks.
There are other solutions to avoid consuming files that are currently being written over FTP; for instance, you can write to a temporary destination and move the file after it has been written.
...
The following message headers can be used to affect the behavior of the component
...
...
Header | Description |
---|---|
| Specifies the output file name (relative to the endpoint directory) to be used for the output message when sending to the endpoint. If this is not present and no expression either, then a generated message ID is used as the filename instead. |
| The actual filepath (path + name) for the output file that was written. This header is set by Camel and its purpose is providing end-users the name of the file that was written. |
...
| Current index out of total number of files being consumed in this batch. |
...
| Total number of files being consumed in this batch. |
| The remote hostname. |
| Path to the local work file, if local work directory is used. |
In addition the FTP/FTPS consumer and producer will enrich the Camel Message
with the following headers
...
...
Header | Description |
---|---|
| Camel 2.11.1: The FTP client reply code (the type is a integer) |
| Camel 2.11.1: The FTP client reply string |
About timeouts
The two set of libraries (see top) has have different API APIs for setting timeout. You can use the connectTimeout
option for both of them to set a timeout in millis to establish a network connection. An individual soTimeout
can also be set on the FTP/FTPS, which corresponds to using ftpClient.soTimeout
. Notice SFTP will automatically use connectTimeout
as its soTimeout
. The timeout
option only applies for FTP/FTSP as the data timeout, which corresponds to the ftpClient.dataTimeout
value. All timeout values are in millis.
...
So if you want to download files from a remote FTP server and store it as files then you need to route to a file endpoint such as:
...
...
The route above is ultra efficient as it avoids reading the entire file content into memory. It will download the remote file directly to a local file stream. The java.io.File
handle is then used as the Exchange body. The file producer leverages this fact and can work directly on the work file java.io.File
handle and perform a java.io.File.rename
to the target filename. As Camel knows it's a local work file, it can optimize and use a rename instead of a file copy, as the work file is meant to be deleted anyway.
Stepwise changing directories
...
The difference between the two of them is best illustrated with an example. Suppose we have the following directory structure on the remote FTP server we need to traverse and download files:
...
And that we have a file in each of sub-a (a.txt) and sub-b (b.txt) folder.
Using stepwise=true (default mode)
...
As you can see when stepwise is enabled, it will traverse the directory structure using CD xxx.
Using stepwise=false
...
As you can see when not using stepwise, there are no CD operation invoked at all.
...
In the sample below we set up Camel to download all the reports from the FTP server once every hour (60 min) as BINARY content and store it as files on the local file system.
...
...
And the route using Spring DSL:
...
Consuming a remote FTPS server (implicit SSL) and client authentication
...
Consuming a remote FTPS server (explicit TLS) and a custom trust store configuration
...
Filter using org.apache.camel.component.file.GenericFileFilter
Camel supports pluggable filtering strategies. This strategy it to use the build in can be provided by implementing org.apache.camel.component.file.GenericFileFilter
in Java. You can then configure the endpoint with such a filter to skip certain filters before being processed.
In the sample we have built our own filter that only accepts files starting with report in the filename.
...
...
And then we can configure our route using the filter attribute to reference our filter (using #
notation) that we have defined in the spring XML file:
...
Filtering using ANT path matcher
...
The sample below demonstrates how to use it:
...
Using a proxy with SFTP
To use an HTTP proxy to connect to your remote host, you can configure your route in the following way:
...
...
You can also assign a user name and password to the proxy, if necessary. Please consult the documentation for com.jcraft.jsch.Proxy
to discover all options.
...
If you want to explicitly specify the list of authentication methods that should be used by sftp
component, use preferredAuthentications
option. If for example you would like Camel to attempt to authenticate with private/public SSH key and fallback to user/password authentication in the case when no public key is available, use the following route configuration:
...
Consuming a single file using a fixed name
When you want to download a single file and knows know the file name, you can use fileName=myFileName.txt
to tell Camel the name of the file to download. By default the consumer will still do a FTP LIST command to do a directory listing and then filter these files based on the fileName
option. Though in this use-case it may be desirable to turn off the directory listing by setting useList=false
. For example the user account used to login to the FTP server may not have permission to do a FTP LIST command. So you can turn off this with useList=false
, and then provide the fixed name of the file to download with fileName=myFileName.txt
, then the FTP consumer can still download the file. If the file for some reason does not exist, then Camel will by default throw an exception, you can turn this off and ignore this by setting ignoreFileNotFoundOrPermissionError=true
.
For example to have a Camel route that pickup picks up a single file, and delete deletes it after use you can do
...
write
...
Notice that we have use used all the options we talked above above.
You can also use this with ConsumerTemplate
. For example to download a single file (if it exists) and grab the file content as a String type:
...
Debug logging
This component has log level TRACE that can be helpful if you have problems. Endpoint See Also Include Page