...
...
As with anything, feel free to browse the documentation on maven: This guide is very helpfullhelpful.
...
-SNAPSHOT is a special marker in maven that tell everybody that this particular piece of code is under development and might change at any time. Opposed to a normal versioned release like '4.0.0', a snapshot is never a stable release. Maven will often try to get a more recent version of a SNAPSHOT during compile. A stable release is fixed, once published there is no changing it anymore. Snapshots are normally used to indicate that a build is made of the HEAD or trunk of a project. Later on this page more about releases using maven.
...
As of 4.3 you should no longer need to download the following netscaler jars. You may receive an error in the install-non-oss.sh script as it will still look for these files.
In case of 4.2/master, Min suggests on ML: To build non-oss build, you need to first download Vmware 5.1 SDK fromfrom https://my.vmware.com/group/vmware/get-download?downloadGroup=VSP510-WEBSDK-510 (Version: 5.1, Release-date: 2012-09-10, Build: 774886) to a temp directory. This is a zip file, unzip file and you will see a vim25.jar in <unzip folder>/SDK/vsphere-ws/java/JAXWS/lib. Place this vim25.jar in deps folder and rename it as vim25_51.jar, then run: deps/install-non-oss.sh to install it into your m2 repo.
...
Available profiles | Enabled by property | Requires profiles | Description | ||
---|---|---|---|---|---|
deps |
| Enables a convenience download for all dependencies into the deps directory, usage mvn -P deps -pl deps install | |||
developer |
| Enables a convenience pom with developer functions | |||
vmware | noredist |
| Enables Enables the build of vmware-base and the vmware plugin, requires vmware SDK to be present. See also Hypervisor VMWare. | ||
netapp | noredist | Enables the build of the netapp plugin, requires NetApp manageontap sdk. | |||
f5 | noredist | Enables the build of the f5 plugin, requires f5 iControl library | |||
netscaler | noredist | Enables the build of the netscaler plugin, requires additional libraries. | |||
srx | noredist | Enables the build of the juniper srx plugin, requires additional libraries. | |||
marvin | marvin.config | developer | Allows you to configure cloudstack using a marvin json configuration | ||
Available properties | Required profile | Description | |||
deploydb | developer | Clears and creates the cloud database in the mysql server configured utils/conf/db.properties | |||
noredist |
|
| Enables all modules that are not part of the standard ASF build | ||
systemvm | systemvm | Enabled the build of the systemvm.iso, requires mkisofs to be available on the commandline | |||
awsapi | awsapi | Enables building of awsapi module along with rest of the CloudStack | |||
simulator | developer | Enables the simulator spring context for running the integration test |
...
On One can use maven to deploy and debug the management server. First export the MAVEN_OPTS variable to open a transport socket on port 8787 (same as before).
Code Block |
---|
$ export MAVEN_OPTS="-Xmx1024m -XX:MaxPermSize=500m -Xdebug -Xrunjdwp:transport=dt_socket,address=8787,server=y,suspend=n" |
If you don't export using above configuration, the management server will run with no debugger attached.
This will run a jetty server on localhost port 8080 with the management server. Make sure that no other processes are using the port 8080. The default port for tomcat is 8080. You can either shut down tomcat service or switch to another port.
Code Block |
---|
$ mvn -pl :cloud-client-ui jetty:run
|
To run a noredist management server:
Code Block |
---|
$ mvn -pl :cloud-client-ui jetty:run -Dnoredist |
NOTE : In case if BUILD process goes fine but, you are unable to access management server then please make sure that 8080 is opened in iptables.
To run awsapi app
Code Block |
---|
$ mvn -Pawsapi -pl :cloud-awsapi jetty:run |
Note: The following is a WIP tomcat-plugin feature, use the above jetty command for now.
Code Block |
---|
$ mvn org.apache.tomcat.maven:tomcat7-maven-plugin:2.0:run -pl :cloud-client-ui -am -Pclient
|
Open the following URL on your browser to access the Management Server UI:
http://localhost:8080/client/
Or,
http://management-server-ip-address:8080/client
The default credentials are; user: admin, password: password and the domain
field should be left blank which is defaulted to the ROOT domain.
Warning | ||
---|---|---|
| ||
This feature is still being developed and tested, might not work as expected |
The agent simulator and marvin are integrated into build steps to help a developer ensure that some simple tests pass before making a commit. The developer environment needs to have Marvin installed for the integration-test to work: These tests are lightweight and should ensure that your checkin doesn't break critical functionality for others working with branch: master.
To run the basic tests please refer to the Marvin wiki section on checkin tests.
Warning | ||
---|---|---|
| ||
Follow the following wiki page for building specific versions of CloudStack from source code. |
Checkout Building where we document building process for specific version of CloudStack such as 4.0 oss/nonoss etc.
Use package.sh to build packages for linux systems that use rpms, like RedHat, CentOS and fedora.
Code Block |
---|
$ cd packaging/centos63
$ ./package.sh
|
On Master:
Code Block |
---|
$ mvn install -P deps && dpkg-buildpackage
|
Note |
---|
If you have compiled with additional flags (ex: -Dnoredist), you can get them packaged into the DEB by exporting those flags into the ACS_BUILD_OPTS prior to running dpkg-buildpackage. Example: mvn clean install -P deps -Dnoredist; export ACS_BUILD_OPTS="-Dnoredist"; dpkg-buildpackage |
WIP: Package using deb profile (feature under development uses jdeb plugin, in https://github.com/bhaisaab/incubator-cloudstack/tree/debs-maven debs-maven branch):
Code Block |
---|
$ mvn package -P deb
|
Following Building CloudStack section above.
Import the project as Maven project. Build with maven, set socket type debugger on port 8787, follow Building CloudStack section above.
See Using Eclipse With CloudStack
Code Block |
---|
$ mvn --projects='org.apache.cloudstack:cloudstack' org.apache.rat:apache-rat-plugin:0.10:check
|
The output file is in ${project.build.directory}/rat.txt, by default in target/rat.txt
Code Block |
---|
$ mvn site
|
Update the version number of the project
Code Block |
---|
mvn release:update-versions -DautoVersionSubmodules=true -Dnoredist -Pdeps,developer -DdevelopmentVersion=<version>-SNAPSHOT
|
Releases can also be done using the release plugin. This plugin will automagically take care of setting the currect version (removing the -SNAPSHOT), making a tag in SCM and deploying the jars to the maven repository. This should only be executed by the release engineer. Maven assumes that once a version is released it will never change anymore and released binaries will never be updated, so any subsequent releases will have to bump the version number.
Code Block |
---|
mvn install -DskipTests=true |
Set commandline parameter -o to force maven to only use the local repository. This might trigger build failures if artifacts are not available locally, but might speed up the build process in some cases.
Code Block |
---|
$ mvn -o
|
Code Block |
---|
// Bash
export MAVEN_OPTS=-Xmx512m
// Windows
set MAVEN_OPTS=-Xmx512m
|
The install-sys-tmplt script will need to be run (before you launch the management server). The example below is for XenServer, if you are using KVM or VMware use "-h" option to specify a different Hypervisor. The choice of the systemVM template from the download site is also Hypervisor specific. This script will place the systemVM image the secondary storage. The systemVMs (e.g. SecondaryStorageVM) are cloned from this image and with the systemv.iso that is built from the image the SystemVM is patched. The install-sys-tmplt script is meant to run in a production environment, and will fail if you run it from a development environment. Here are the step to run it from a development environment:
...
For most versions of java on most version of macosx you need to add '-Djava.net.preferIPv4Stack=true
' to that so to be on the save side; on macosx
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
$ export MAVEN_OPTS="-Xmx1024m -XX:MaxPermSize=500m -Xdebug -Xrunjdwp:transport=dt_socket,address=8787,server=y,suspend=n -Djava.net.preferIPv4Stack=true" |
code
-Djava.net.preferIPv4Stack=true
code
If you don't export using above configuration, the management server will run with no debugger attached.
On some (macosx) systems you might want to add "-Djava.net.preferIPv4Stack=true". Escpecially when using mixed wired and wireless networks.
This will run a jetty server on localhost port 8080 with the management server. Make sure that no other processes are using the port 8080. The default port for tomcat is 8080. You can either shut down tomcat service or switch to another port.
Code Block |
---|
$ mvn -pl :cloud-client-ui jetty:run
|
To run a noredist management server:
Code Block |
---|
$ mvn -pl :cloud-client-ui jetty:run -Dnoredist |
NOTE : In case if BUILD process goes fine but, you are unable to access management server then please make sure that 8080 is opened in iptables.
To run awsapi app
Code Block |
---|
$ mvn -Pawsapi -pl :cloud-awsapi jetty:run |
Note: The following is a WIP tomcat-plugin feature, use the above jetty command for now.
Code Block |
---|
$ mvn org.apache.tomcat.maven:tomcat7-maven-plugin:2.0:run -pl :cloud-client-ui -am -Pclient
|
Open the following URL on your browser to access the Management Server UI:
http://localhost:8080/client/
Or,
http://management-server-ip-address:8080/client
The default credentials are; user: admin, password: password and the domain
field should be left blank which is defaulted to the ROOT domain.
Warning | ||
---|---|---|
| ||
This feature is still being developed and tested, might not work as expected |
The agent simulator and marvin are integrated into build steps to help a developer ensure that some simple tests pass before making a commit. The developer environment needs to have Marvin installed for the integration-test to work: These tests are lightweight and should ensure that your checkin doesn't break critical functionality for others working with branch: master.
To run the basic tests please refer to the Marvin wiki section on checkin tests.
Warning | ||
---|---|---|
| ||
Follow the following wiki page for building specific versions of CloudStack from source code. |
Checkout Building where we document building process for specific version of CloudStack such as 4.0 oss/nonoss etc.
Use package.sh to build packages for linux systems that use rpms, like RedHat, CentOS and fedora.
Code Block |
---|
$ cd packaging/centos63
$ ./package.sh
|
On Master:
Code Block |
---|
$ mvn install -P deps && dpkg-buildpackage
|
Note |
---|
If you have compiled with additional flags (ex: -Dnoredist), you can get them packaged into the DEB by exporting those flags into the ACS_BUILD_OPTS prior to running dpkg-buildpackage. Example: mvn clean install -P deps -Dnoredist; export ACS_BUILD_OPTS="-Dnoredist"; dpkg-buildpackage or mvn install -P deps -Dnoredist -Dnonoss; export ACS_BUILD_OPTS="-Dnoredist -Dnonoss"; dpkg-buildpackage |
WIP: Package using deb profile (feature under development uses jdeb plugin, in https://github.com/bhaisaab/incubator-cloudstack/tree/debs-maven debs-maven branch):
Code Block |
---|
$ mvn package -P deb
|
Following Building CloudStack section above.
Import the project as Maven project. Build with maven, set socket type debugger on port 8787, follow Building CloudStack section above.
See Using Eclipse With CloudStack
Code Block |
---|
$ mvn --projects='org.apache.cloudstack:cloudstack' org.apache.rat:apache-rat-plugin:0.10:check
|
The output file is in ${project.build.directory}/rat.txt, by default in target/rat.txt
Code Block |
---|
$ mvn -P developer,systemvm,quality -Dsimulator -Dnoredist clean install clover:aggregate clover:clover
|
The output coverage website is generated at target/site/clover/index.html
Code Block |
---|
$ mvn site
|
Update the version number of the project
Code Block |
---|
mvn release:update-versions -DautoVersionSubmodules=true -Dnoredist -Pdeps,developer -DdevelopmentVersion=<version>-SNAPSHOT
|
Releases can also be done using the release plugin. This plugin will automagically take care of setting the currect version (removing the -SNAPSHOT), making a tag in SCM and deploying the jars to the maven repository. This should only be executed by the release engineer. Maven assumes that once a version is released it will never change anymore and released binaries will never be updated, so any subsequent releases will have to bump the version number.
Code Block |
---|
mvn install -DskipTests=true |
Set commandline parameter -o to force maven to only use the local repository. This might trigger build failures if artifacts are not available locally, but might speed up the build process in some cases.
Code Block |
---|
$ mvn -o
|
Code Block |
---|
// Bash
export MAVEN_OPTS=-Xmx512m
// Windows
set MAVEN_OPTS=-Xmx512m
|
The install-sys-tmplt script will need to be run (before you launch the management server). The example below is for XenServer, if you are using KVM or VMware use "-h" option to specify a different Hypervisor. The choice of the systemVM template from the download site is also Hypervisor specific. This script will place the systemVM image the secondary storage. The systemVMs (e.g. SecondaryStorageVM) are cloned from this image and with the systemv.iso that is built from the image the SystemVM is patched. The install-sys-tmplt script is meant to run in a production environment, and will fail if you run it from a development environment. Here are the step to run it from a development environment:
Code Block |
---|
# mkdir -p /etc/cloudstack/management/
# cp ./client/target/cloud-client-ui-4.3.0-SNAPSHOT/WEB-INF/classes/db.properties /etc/cloudstack/management/
# ./client/target/generated-webapp/WEB-INF/classes/scripts/storage/secondary/cloud-install-sys-tmplt -m /mnt/secondary -u http://jenkins.buildacloud.org/view/All/job/build-systemvm64-master/lastSuccessfulBuild/artifact/tools/appliance/dist/systemvm64template-master-4.6.0-xen.vhd.bz2 -h xenserver -F
|
To enable remote debugging on a system go to the cloudstack-management file (for centOS 7 this file can be found under the following path: /etc/default/cloudstack-management).|
Add
-agentlib:jdwp=transport=dt_socket,server=y,suspend=n,address=5000
To the JAVA_OPTS:
JAVA_OPTS="-Djava.awt.headless=true -Dcom.sun.management.jmxremote=false -Xmx2g -XX:+HeapDumpOnOutOfMemoryError -XX:HeapDumpPath=/var/log/cloudstack/management/ -XX:PermSize=512M -XX:MaxPermSize=800m -Djavax.net.ssl.trustStore=/etc/cloudstack/management/cloud.jks -Djavax.net.ssl.trustStorePassword=vmops.com -agentlib:jdwp=transport=dt_socket,server=y,suspend=n,address=5000 "
Restart your management server (systemctl restart cloudstack-management).
You can now connect your java debugger on port 5000.
Add
JAVA_TOOL_OPTIONS="-agentlib:jdwp=transport=dt_socket,server=y,suspend=n,address=5000"
...