Page History

Panel

borderColor	gray
borderWidth	21
borderStyle	solid
title	About

describes the tools that need to be manually downloaded, built and installed on a system used to build Trafodion.

Table of Contents

Configurable Installation

The location of the tools is configurable and can be specified in the Trafodion configuration file. The Trafodion configuration file template is located in:

<Trafodion download directory>/incubator-trafodion/core/sqf/LocalSettingsTemplate.sh.

Following the directory structure shown in the template file makes it easier to specify the location of these tools for the build. This means you will only need to set the TOOLSDIR environment variable to the value of the common parent directory before building Trafodion.

Describes how to download, build, and install build tools required for Apache Trafodion.

Table of Contents

...

Required Build Tools

Several tools need to be downloaded, built, and installed:

Tool	Description
MPICH	An implementation of the Message Passing Interface (MPI) standard. For use in Trafodion, MPICH must be built to force sockets to be used in both internode and intranode message passing.
Bison	General-purpose parser generator.
Udis86	Minimalistic disassembler library (libudis86) for the x86 class of instruction set architectures.
LLVM	Collection of modular and reusable compiler and toolchain technologies.
ICU	Setup of C/C++ and Java libraries providing Unicode and Globalization support for software applications.
Zookeeper	Coordination service for distributed applications. It exposes common services such as naming, configuration management, synchronization, and group services.
Thrift	Communications and data serialization tool.
Maven	Build tool that is only installed if compatible version does not exist.
log4cxx	standard logging framework for C++
hadoop	shared libraries for libhadoop, libhdfs, and hdfs header file

You can install these tools using one of the following methods:

traf_tools_setup.sh installation: a script that uses wget to download the appropriate tar file, builds, and installs the required tool into a directory of your choice for each tool listed above. The advantage of this method is that all the correct tools are downloaded and built in a single directory. Before building, a single environment variable needs to be set called TOOLSDIR.

Manual installation: if one or more of these tools are already installed in your environment or if you want to verify the download location before accepting software, then you can install each tool separately.  The advantage of this method is you don't have to reinstall tools that you already have installed.  However, there may be an issue with incompatibility between the existing tools and versions required by Trafodion.  If you choose this method, you need export the following variables before building:

export BISON="<tool location>/bison_3_linux/bin/bison"
export LLVM="<tool location>/dest-llvm-3.2"
export UDIS86="<tool location>/udis86-1.7.2"
export ICU="<tool location>/icu4.4"
export MPICH_ROOT="<tool location>/dest-mpich-3.0.4"
export ZOOKEEPER_DIR="<tool location>/zookeeper-3.4.5"
export THRIFT_LIB_DIR="<tool location>/thrift-0.9.0/lib"
export THRIFT_INC_DIR="<tool location>/thrift-0.9.0/include"
export LOG4CXX_LIB_DIR="<tool location>/apache-log4cxx-0.10.0/lib"
export HADOOP_BLD_LIB="<tool location>/hadoop-2.6.0/lib/native"
export HADOOP_BLD_INC="<tool location>/hadoop-2.6.0/include"

traf_tools_setup.sh Installation

Note

You may want to modify traf_tools_setup.sh for your specific environment. Example: if you already have Zoopkeeper installed, you may not want to re-install it.

You may need root or sudo access to installs the tools in desired locations.

In the sections below, incubator-trafodion represents the root directory where you installed the Trafodion source. (If you have not yet downloaded Trafodion source, please do so now.)

Code Block

language	text
title	traf_tools_setup.sh Usage

cd incubator-trafodion. <Trafodion source directory>/install
./traf_tools_setup.sh -h
Usage: ./traf_tools_setup.sh -d <downloaddir> -i <installdir>
 -d <downloaddir> - location of download directory
 -i <installdir>  - location of install directory
 -h - help
example: traf_tools_setup.sh -d /home/userx/download -i /home/userx/tools

Run traf_tools_setup.sh to install all dependent tools.

Code Block

language	text
title	Example

$ mkdir ~/download
$ ./traf_tools_setup.sh -d ~/download -i ~/tools
INFO: Starting tools build on Fri Nov  6 21:33:53 PST 2015
Tools install directory /home/centos/tools does not exist, do you want to to create it? y/n : y
INFO: Created directory /home/centos/tools
INFO: Tar download location: /home/centos/download
INFO: Tool install directory location: /home/centos/tools
INFO: LogFile location: /home/centos/incubator-trafodion/install/traf_tools_setup.log
 ***********************************************************
INFO: Installing MPI on Fri Nov  6 21:34:00 PST 2015
INFO:   downloaded tar file: mpich-3.0.4.tar.gz
.
.
.
INFO:   downloaded tar file:  apache-maven-3.3.3-bin.tar.gz
INFO: Maven installation complete
 ***********************************************************
INFO: Completed tools build on Fri Nov  6 22:23:22 PST 2015
INFO: List of tools directory:
apache-maven-3.3.3
bison_3_linux
dest-llvm-3.2
dest-mpich-3.0.4
icu4.4
thrift-0.9.0
udis86-1.7.2
zookeeper-3.4.5

Note
Don't move the install directory later.

Manual Install

In the sections below, the <tool installation directory> is the directory where you want the tool to be installed.

MPICH

Tested Version: 3.0.4

Download: http://www.mpich.org/static/downloads/3.0.4/mpich-3.0.4.tar.gz (http://www.mpich.org/downloads)

Considerations: For more detailed instructions, see the README file that comes with the source.

Install:

note

Code Block

language	text

tar -xzf mpich-3.0.4.tar.gz
cd mpich-3.0.4
./configure --prefix=<tool installation directory>/dest-mpich-3.0.4 --with-device=ch3:sock --disable-f77 --disable-fc 
make
make check
make install

<tool installation directory> is the directory where you want MPICH to be installed. If you do not specify the --prefix option, the default location is /usr/local

...

.

Bison

Tested Version: 3.0

Download: http://ftp.gnu.org/gnu/bison/bison-3.0.tar.gz (http://ftp.gnu.org/gnu/bison/)

...

Adjust your PATH to ensure that the correct version is chosen. Rerun the bison --version to verify.

Udis86

Tested Version: 1.7.2

Download: http://sourceforge.net/projects/udis86/files/udis86/1.7/udis86-1.7.2.tar.gz (http://udis86.sourceforge.net)

...

Code Block

language	text

tar xzf udis86-1.7.2.tar.gz
cd udis86-1.7.2
./configure --prefix=<tool installation directory>/udis86-1.7.2 --enable-shared
make
make install

LLVM

Tested Version: 3.2

Download: http://llvm.org/releases/3.2/llvm-3.2.src.tar.gz (http://llvm.org/releases/download.html)

...

Code Block

language	text

  # Set BASE_DIR to the top-level directory where the LLVM source will be 
  # unpacked and the objects compiled.
  BASE_DIR=<your-base-dir>
  cd $BASE_DIR
  tar xzf llvm-3.2.src.tar.gz
  
  export MY_UDIS_INSTALL_DIR=<udis-installation-directory>/udis86-1.7.2
  export MY_LLVM_INSTALL_DIR=<llvm-installation-directory>/dest-llvm-3.2/
  export MY_LLVM_SRC_DIR=$BASE_DIR/llvm-3.2.src
  export MY_LLVM_OBJ_DIR=$BASE_DIR/llvm-3.2.obj/
  export LD_LIBRARY_PATH=$MY_UDIS_INSTALL_DIR/lib:$LD_LIBRARY_PATH
  export C_INCLUDE_PATH=$MY_UDIS_INSTALL_DIR/include
  export CPATH=$MY_UDIS_INSTALL_DIR/include

  mkdir -p $MY_LLVM_OBJ_DIR/release
  cd $MY_LLVM_OBJ_DIR/release

  $MY_LLVM_SRC_DIR/configure --prefix=$MY_LLVM_INSTALL_DIR/release \
   --enable-optimized --enable-jit \
   --enable-shared --enable-targets=x86,x86_64,cpp \
   --with-udis86=$MY_UDIS_INSTALL_DIR/lib \
   CFLAGS=-fgnu89-inline

  make libs-only
  make install-libs

  mkdir -p $MY_LLVM_OBJ_DIR/debug
  cd $MY_LLVM_OBJ_DIR/debug

  $MY_LLVM_SRC_DIR/configure --prefix=$MY_LLVM_INSTALL_DIR/debug \
   --enable-optimized --enable-jit \
   --enable-debug-runtime --enable-debug-symbols \
   --enable-shared --enable-targets=x86,x86_64,cpp \
   --with-udis86=$MY_UDIS_INSTALL_DIR/lib \
   CFLAGS=-fgnu89-inline

  make libs-only
  make install-libs

ICU

Tested Version: 4.4.0

Download: http://download.icu-project.org/files/icu4c/4.4/icu4c-4_4-src.tgz (http://site.icu-project.org/download)

...

Note

The following make check errors can be ignored.

[All tests passed successfully...]

Elapsed Time: 00:00:12.126

make[2]: Leaving directory `/home/centos/icu/source/test/cintltst'

---------------

ALL TESTS SUMMARY:

ok:  testdata iotest cintltst

===== ERRS:  intltest

make[1]: *** [check-recursive] Error 1

make[1]: Leaving directory `/home/centos/icu/source/test'

make: *** [check-recursive] Error 2

Zookeeper

Tested Version: 3.4.5

Download: https://archive.apache.org/dist/zookeeper/zookeeper-3.4.5/zookeeper-3.4.5.tar.gz

...

Code Block

language	text

tar -xzf zookeeper-3.4.5.tar.gz
cd zookeeper-3.4.5/src/c
./configure --prefix=<tool installation directory>/zookeeper-3.4.5
make
make install

Thrift

Tested Version: 0.9.0

Download: http://archive.apache.org/dist/thrift/0.9.0/

...

Code Block

language	text

tar -xzf thrift-0.9.0.tar.gz
cd thrift-0.9.0
./configure --prefix=<tool installation dir>/thrift-0.9.0 --without-qt 
make
make install

Maven

Tested Version: 3.3.3

Download: http://archive.apache.org/dist/maven/maven-3/3.3.3/binaries/apache-maven-3.3.3-bin.tar.gz.

...

Space shortcuts

Page tree

Versions Compared

Old Version 15

New Version Current

Key

Configurable Installation

Required Build Tools

traf_tools_setup.sh Installation

Manual Install

MPICH

Bison

Udis86

LLVM

ICU

Zookeeper

Thrift

Maven