Table of Contents |
---|
Status
Current state: Under Discussion Accepted
Discussion thread: here
JIRA: here
Please keep the discussion on the mailing list rather than commenting on the wiki (wiki discussions get unwieldy fast).
Motivation
Right now, a stream processor with EOS has to delete all data from the local state stores on after crash failure because the state stores might be in a partially updated state after crash failure. The partial update of a state store can happen during a crash failure because the changes to the local state are not atomic with respect to Kafka Streams commit. If an application with EOS crashes between commits, it cannot reset the state to the previously committed, so it wipes the state stores and replays the changelog from scratch.
This KIP proposes making writes to the state stores transactional , so that they atomically commit only after the corresponding changes are committed to the changelog topic. As a result, Streams applications configured with EOS will no longer need to wipe the state stores on crash failure. Transactional writes can also be used in combination with ALOS to reduce duplication.
Public Interfaces
Changed:
- org.apache.kafka.streams.processor.StateStore
org.apache.kafka.streams.
StreamsConfigstate.Stores
org.apache.kafka.streams.
StoreQueryParameterskstream.Materialized.StoreType
Proposed Changes
...
Background
This section introduces the overview of the proposed changes. The following sections will cover the changes in behavior, configuration, and interfaces in detail.
This KIP proposes introducing an enabled by default feature flag (statestore.transactional.enabled
) that makes writes to state stores transactional, meaning they apply atomically after the applications commits to the changelog topic. The transactional guarantees come with non-zero overhead, so the feature flag acts as a safety switch if Kafka Streams users decide to opt-out. This feature presents a trade-off between increased read, write, and memory amplifications and time to recover from crash failure in the case of EOS. As for ALOS, the system benefits from fewer duplicated records.
When the feature flag is on, and the state store supports transactions (checked via new boolean method StateStore#transactional
), it applies changes atomically only after they were committed to the changelog topic. Transactional state stores do not delete the checkpoint file and the underlying data in the case of EOS. Instead, they roll forward from the changelog topic on recovery. When the feature flag is off or the store does not support transactions, EOS recovery behaves as it does now - the task will delete the checkpoint file and recover from the changelog.
This KIP does not introduce separate methods to begin and commit transactions. Instead, a transactional state store commits a currently open transaction on StateStore#flush
if the feature flag is true. The reasons for that behavior are the following:
- There is always a single writer in Kafka Streams workloads, and all writes must go to a single currently open transaction.
- There is always a single reader that queries dirty state from a single open transaction.
- The state stores already explicitly call flush before writing to the checkpoint file to make uncommitted changes durable. Adding separate methods will create room for error, such as a missing call to
beginTxn
orcommitTxn
, or flushing before committing.
...
briefly describes relevant parts of a stateful task's write lifecycle with EOS.
- The task (StreamTask, StandbyTask) registers its state stores. State stores load offset metadata from the checkpoint file (link). That step aims to establish a mapping between data in the state store and the offset of the changelog topic.
- In case of crash failure, if the state store has data, but the checkpoint file does not exist, ProcessorStateManager throws an exception for EOS tasks. This is an indicator to throw away local data and replay the changelog topic (link).
- The task processes data and writes its state locally.
- The task commits EOS transaction. TaskExecutor#commitOffsetsOrTransaction calls StreamsProducer#commitTransaction that sends new offsets and commits the transaction.
- The task runs a postCommit method (StreamTask, StandbyTask) that:
- Go to step 2 until task shuts down. During shutdown, the task stops processing data, then writes its current offset to the checkpoint file and halts.
If the failure happens at steps 2 or 3, the state store might contain records that have not yet been committed by EOS transaction. These uncommitted records violate the EOS guarantees and are the reason why Kafka Streams deletes state store data if EOS is enabled.
Overview
This section introduces an overview of the proposed changes. The following sections will cover the changes in behavior, configuration, and interfaces in detail.
This KIP introduces persistent transactional state stores that
- distinguish between uncommitted and committed data in the state store
- guarantee atomic commit, meaning that either all uncommitted (dirty) writes will be applied together or none will.
These guarantees are sufficient to prevent the failure scenario described in the previous section.
This proposal deprecates the StateStore#flush
method and introduces 2 other methods instead - StateStore#commit(changelogOffset)
and StateStore#recover(changelogOffset)
that commit the current state at a specified offset and recover from the crash failure to a previously checkpointed offset accordingly. With these changes, the lifecycle of a stateful task with transactional state stores becomes:
- The task registers its state stores. The state stores call
StateStore#recover
that discards uncommitted data. - The task processes data and writes new records as uncommitted.
- The task commits the EOS transaction.
- The task runs a postCommit method that:
- commits dirty writes.
- updates the checkpoint file.
- The task shuts down.
Consider possible failure scenarios:
- The crash happens between steps 1 and 3. The uncommitted data will be discarded. The input records were not committed via the EOS transaction, so the task will re-process them.
- The crash happens between 3 and 4a. The EOS transaction has been already committed, but the state store hasn't. The state store will replay the uncommitted records from the changelog topic.
- The crash happens between 4a and 4b. The state store has already committed the new records, but they are not yet reflected in the checkpoint file. The state store will replay the last committed records from the changelog topic. This operation is idempotent and does not violate correctness.
- The crash happens after step 4b. The state store does nothing during recovery.
There are multiple ways to implement state store transactions that present different trade-offs. This proposal includes a single reference implementation via a secondary RocksDB for uncommitted writes.
StateStore changes
This section covers multiple changes to the state store interfaces. This proposal replaces StateStore#flush
with 2 new methods - StateStore#commit(Long)
and StateStore#recover(long)
and adds a boolean transactional()
method to determine if a state store is transactional.
The reasoning behind replacing flush
with commit/recover
is two-fold. First, let's talk about why we don't need both flush
and commit:
- There is always a single writer in Kafka Streams workloads, and all writes must go to a single currently open transaction.
- There is always a single reader that queries dirty state from a single open transaction.
- The state stores already explicitly call flush after AK transaction commits before writing to the checkpoint file to make uncommitted changes durable. Adding a separate method will create room for error, such as a missing
commit
call or executing both commands in the wrong order.
In this sense, flush
and commit
are semantically the same thing. The separation of concerns between these 2 methods will be ambiguous and it is unclear what is the correct call order.
The purpose of StateStore#recover(long changelogOffset)
method is to transition the state store to a consistent state after crash failure. This method discards any changes that are not yet committed to the changelog topic and ensures that its state corresponds to the offset that is greater than or equal to the checkpointed changelogOffset
.
Behavior changes
If StateStore#
transactional()
returns true
, then the store performs writes via the implementation-specific transactional mechanism. Reads via ReadOnlyKeyValueStore
methods return uncommitted data from the ongoing transaction.
A transactional state store opens the first transaction during initialization. It commits on StateStore#commit
Interface Changes
StateStore
Code Block | ||||
---|---|---|---|---|
| ||||
/**
* Return if the storage supports transactions or not.
*
* @return {@code true} if the storage supports transactions, {@code false} otherwise
*/
default boolean transactional() {
return false;
}
/**
* Flush any cached data. When {@link #transactional()} returns true, flush commits dirty writes.
*/
void flush(); |
The flush signature did not change, but the way it is expected to work when transactional() is true does, so I am including it here as well:
Configuration changes
StreamsConfig:
statestore.transactional.enabled
(true
by default) - enables transactional behavior for the state stores. When false, the state stores behave as they do now.statestore.transactional.mechanism
(rockdb_indexbatch
by default) - specifies the means to implement transactional writes.rockdb_indexbatch
is the only valid configuration value for now.
StoreQueryParameters:
readCommitted
(false
by default) - controls whether interactive queries read uncommitted or committed data.
Behavior changes
If statestore.transactional.enabled
is true and the underlying state store implements transactions (i.e., StateStore#
transactional()
returns true
), then the store writes via the transactional mechanism specified by statestore.transactional.mechanism
. Reads via ReadOnlyKeyValueStore
methods return uncommitted data from the ongoing transaction.
If statestore.transactional.enabled
is true
, but the store does not support transactions, the corresponding stream task falls back to the non-transactional behavior.
Interactive queries return either committed or uncommitted results, according to enable.iq.read_committed
.
A transactional state store opens the first transaction during initialization. It commits on StateStore#flush
- first, the store commits the transaction, then flushes, then starts a new transaction.
There are several places where StreamTask
, ProcessorStateManager
, and TaskManager
check if EOS is enabled, and then it deletes the checkpoint file on crash failure, specifically, when:
StreamTask
resumes processing (link)ProcessorStateManager
initializes state stores from offsets from checkpoint (link1, link2)StreamTask
writes offsets to the checkpoint file on after committing (link)TaskManager
handles revocation (link)
The if-EOS
condition should only apply in all these cases if the feature flag is off or state stores are not transactional.
RocksDB
When statestore.transactional.mechanism=rockdb_indexbatch
, Kafka Streams will make the writes to the built-in RocksDB state store transactional by using WriteBatchWithIndex, which is similar to WriteBatch
already used segment stores, except it also allows reading uncommitted data.
The advantage of this approach is that it uses the RocksDB built-in mechanism to ensure transactionality and offers the smallest possible write amplification overhead.
The disadvantage of this approach is that all uncommitted writes must fit into memory. In practice, RocksDB developers recommend the batches to be no larger than 3-4 megabytes (link).
If EOS is enabled, we will remove offset information for non-transactional state stores from the checkpoint file instead of just deleting the file.
Configuration changes
StreamsConfig
default.dsl.store
has a new valid value - txn_rocksDB
that enables transactional RocksDB state store.
Interface Changes
StateStore
Code Block | ||||
---|---|---|---|---|
| ||||
/**
* Return true the storage supports transactions.
*
* @return {@code true} if the storage supports transactions, {@code false} otherwise
*/
@Evolving
default boolean transactional() {
return false;
}
/**
* Flush any cached data
*
*/
@Deprecated
default void flush() {}
/**
* Flush and commit any cached data
* <p>
* For transactional state store commit applies all changes atomically. In other words, either the
* entire commit will be successful or none of the changes will be applied.
* <p>
* For non-transactional state store this method flushes cached data.
*
* @param changelogOffset the offset of the changelog topic this commit corresponds to. The
* offset can be null if the state store does not have a changelog
* (e.g. a global store).
* @code null}
*/
@Evolving
default void commit(final Long changelogOffset) {
if (transactional()) {
throw new UnsupportedOperationException("Transactional state store must implement StateStore#commit");
} else {
flush();
}
}
/**
* Recovers the state store after crash failure.
* <p>
* The state store recovers by discarding any writes that are not committed to the changelog
* and rolling to the state that corresponds to {@code changelogOffset} or greater offset of
* the changelog topic.
*
* @param changelogOffset the checkpointed changelog offset.
* @return {@code true} if the state store recovered, {@code false} otherwise.
*/
@Evolving
default boolean recover(final long changelogOffset) {
if (transactional()) {
throw new UnsupportedOperationException("Transactional state store must implement StateStore#recover");
}
return false;
} |
Stores
Code Block | ||
---|---|---|
| ||
/**
* Create a persistent {@link KeyValueBytesStoreSupplier}.
* <p>
* This store supplier can be passed into a {@link #keyValueStoreBuilder(KeyValueBytesStoreSupplier, Serde, Serde)}.
* If you want to create a {@link TimestampedKeyValueStore} you should use
* {@link #persistentTimestampedKeyValueStore(String)} to create a store supplier instead.
*
* @param name name of the store (cannot be {@code null})
* @param transactional whether the store should be transactional
* @return an instance of a {@link KeyValueBytesStoreSupplier} that can be used
* to build a persistent key-value store
*/
public static KeyValueBytesStoreSupplier persistentKeyValueStore(final String name, final boolean transactional)
/**
* Create a persistent {@link KeyValueBytesStoreSupplier}.
* <p>
* This store supplier can be passed into a
* {@link #timestampedKeyValueStoreBuilder(KeyValueBytesStoreSupplier, Serde, Serde)}.
* If you want to create a {@link KeyValueStore} you should use
* {@link #persistentKeyValueStore(String)} to create a store supplier instead.
*
* @param name name of the store (cannot be {@code null})
* @param transactional whether the store should be transactional
* @return an instance of a {@link KeyValueBytesStoreSupplier} that can be used
* to build a persistent key-(timestamp/value) store
*/
public static KeyValueBytesStoreSupplier persistentTimestampedKeyValueStore(final String name, final boolean transactional)
/**
* Create a persistent {@link WindowBytesStoreSupplier}.
* <p>
* This store supplier can be passed into a {@link #windowStoreBuilder(WindowBytesStoreSupplier, Serde, Serde)}.
* If you want to create a {@link TimestampedWindowStore} you should use
* {@link #persistentTimestampedWindowStore(String, Duration, Duration, boolean)} to create a store supplier instead.
*
* @param name name of the store (cannot be {@code null})
* @param retentionPeriod length of time to retain data in the store (cannot be negative)
* (note that the retention period must be at least long enough to contain the
* windowed data's entire life cycle, from window-start through window-end,
* and for the entire grace period)
* @param windowSize size of the windows (cannot be negative)
* @param retainDuplicates whether or not to retain duplicates. Turning this on will automatically disable
* caching and means that null values will be ignored.
* @param transactional whether the store should be transactional
* @return an instance of {@link WindowBytesStoreSupplier}
* @throws IllegalArgumentException if {@code retentionPeriod} or {@code windowSize} can't be represented as {@code long milliseconds}
* @throws IllegalArgumentException if {@code retentionPeriod} is smaller than {@code windowSize}
*/
public static WindowBytesStoreSupplier persistentWindowStore(final String name,
final Duration retentionPeriod,
final Duration windowSize,
final boolean retainDuplicates,
final boolean transactional) throws IllegalArgumentException
/**
* Create a persistent {@link WindowBytesStoreSupplier}.
* <p>
* This store supplier can be passed into a {@link #windowStoreBuilder(WindowBytesStoreSupplier, Serde, Serde)}.
* If you want to create a {@link TimestampedWindowStore} you should use
* {@link #persistentTimestampedWindowStore(String, Duration, Duration, boolean)} to create a store supplier instead.
*
* @param name name of the store (cannot be {@code null})
* @param retentionPeriod length of time to retain data in the store (cannot be negative)
* (note that the retention period must be at least long enough to contain the
* windowed data's entire life cycle, from window-start through window-end,
* and for the entire grace period)
* @param windowSize size of the windows (cannot be negative)
* @param retainDuplicates whether or not to retain duplicates. Turning this on will automatically disable
* caching and means that null values will be ignored.
* @param transactional whether the store should be transactional
* @return an instance of {@link WindowBytesStoreSupplier}
* @throws IllegalArgumentException if {@code retentionPeriod} or {@code windowSize} can't be represented as {@code long milliseconds}
* @throws IllegalArgumentException if {@code retentionPeriod} is smaller than {@code windowSize}
*/
public static WindowBytesStoreSupplier persistentTimestampedWindowStore(final String name,
final Duration retentionPeriod,
final Duration windowSize,
final boolean retainDuplicates,
final boolean transactional) throws IllegalArgumentException
/**
* Create a persistent {@link SessionBytesStoreSupplier}.
*
* @param name name of the store (cannot be {@code null})
* @param retentionPeriod length of time to retain data in the store (cannot be negative)
* (note that the retention period must be at least as long enough to
* contain the inactivity gap of the session and the entire grace period.)
* @param transactional whether the store should be transactional
* @return an instance of a {@link SessionBytesStoreSupplier}
*/
public static SessionBytesStoreSupplier persistentSessionStore(final String name,
final Duration retentionPeriod,
final boolean transactional) |
Materialized.StoreType
Materialized.StoreType
enum has a new value TXN_ROCKS_DB
that corresponds to a transactional state store implementation based on RocksDBA considered alternative is OptimisticTransactionDB, which offers more guarantees than Kafka Streams needs, specifically - ensures that there were no write conflicts between concurrent transactions before committing. There are no concurrent transactions in Kafka Streams, so there is no reason to pay for the associated overhead.
Compatibility, Deprecation, and Migration Plan
Applications using Transactional state stores will be disabled by default. Both Streams DSL and a Processor API users can enable transactional writes in the built-in RocksDB state store implementation will get transactional state stores enabled by default. They can opt out by disabling the feature flag. by passing a new boolean flag transactional=true
to Materialized
constructor and Stores
factory methods. Custom state stores will have an option to enable transactionality by adjusting their implementation according to the StateStore#transactional()
contract.
StateStore#flush()
method is deprecated. New StateStore#commit(changelogOffset)
method will by default fall back to StateStore#flush()
for non-transactional state storesApplications using Processor API will work as they do now. This will happen because the default implementation of StateStore#transactional
returns false
, so the relevant code in StreamTask
, ProcessorStateManager
, etc. will fall back to the non-transactional behavior.
Proposed changes are source compatible and binary incompatible with previous releases.
Test Plan
- Add a variation for all existing stateful tests to run with enabled transactional state stores.
- Add tests to ensure that transactional state stores discard uncommitted changes after Changes not committed to the changelog topic are discarded on crash failure.
- Changes committed to the changelog topic, but not committed to the state store are rolled forward.
Rejected Alternatives
- Add tests to ensure that transactional state stores replay missing changes from the changelog topic on recovery.
Transactions via Secondary State Store for Uncommitted
...
Changes
This proposal comes with a reference implementation used in the Stores#
factory methods used to create transactional state stores. In this implementation, transactionality is guaranteed by batching uncommitted (dirty) writes in a temporary RocksDB instance. On commit, such state store copies uncommitted writes from the temporary store to the main store, then truncates the temporary stores.
All writes and deletes go to the temporary store. Reads query the temporary store; if the data is missing, query the regular store. Range reads query both stores and return a KeyValueIterator
that merges the results. On crash failure, ProcessorStateManager
calls StateStore#recover(offset)
that
...
In this alternative, Kafka Streams opens two stores instead of one - a temporary store and a regular store. All uncommitted writes go to the temporary store. Once the task flushes, the temporary store creates a commit file, an empty file that indicates that the corresponding file is ready to commit, and writes stored records to the regular store. It truncates the store and deletes the commit file once it is finished.
On crash failure, the task checks if the temporary store and the commit file exist. If they do, the task repeats the commit process described above. Otherwise, it truncates the temporary store.
...
- It doubles the number of open state stores
- It potentially has higher write and read amplification due to uncontrolled flushes of the temporary state store.
For completeness, below are the details on the changes required to support this implementation.
Interface changes
StoreSupplier
:
...
- It requires an additional value copy per write to model deletions.
Rejected Alternatives
RocksDB in-memory Indexed Batches
A considered alternative is to make built-in RocksDB state store transactional by using WriteBatchWithIndex, which is similar to WriteBatch
already used segment stores, except it also allows reading uncommitted data.
The advantage of this approach is that it uses the RocksDB built-in mechanism to ensure transactionality and offers the smallest possible write amplification overhead.
The disadvantage of this approach is that all uncommitted writes must fit into memory. In practice, RocksDB developers recommend the batches to be no larger than 3-4 megabytes (link) which might be an issue
RocksDB Optimistic Transactions
Another considered alternative is OptimisticTransactionDB. This alternative suffers from the same issues as in-memory indexed batches, but also has greater overhead. It offers more guarantees than Kafka Streams needs, specifically - ensures that there were no write conflicts between concurrent transactions before committing. There are no concurrent transactions in Kafka Streams, so there is no reason to pay for the associated overhead.
...
TransactionalKeyValueByteStore
:
- A constructor accepts a DB and a store supplier for the tmp store.
- On init, the state store configures depending on the state of the feature flag. If it is set to
false
, thenTransactionalKeyValueByteStore
just forwards all methods toinner
. Otherwise, it creates a temporary store and implements behavior changes described below.
Behavior changes
All writes and deletes go to the temporary store. Reads query the temporary store and if the data is missing, query the regular store. Range reads query both stores and return a KeyValueIterator
that merges the results.
Similar to CachingKeyValueStore
and ChangeLoggingKeyValueBytesStore
, classes extending AbstractStoreBuilder
will wrap created state stores withTransactionalKeyValueByteStore
.
Method to control transaction lifecycle in StateStore
...