Table of Contents |
---|
Status
Current state: Under Discussion Accepted
Discussion thread: here
JIRA: KAFKA-3492
...
With the introduction of security in Kafka 0.9, the identity of Kafka clients is the user principal. User principal is an authenticated user or a grouping of unauthenticated users chosen by the broker using a configurable PrincipalBuilder
and is currently used for ACLs. Client-id is a logical grouping of clients with a meaningful name that is used in client metrics and logs. Multi-user systems have a hierarchy - user owns zero or more clients. (user<user-principal, client-id
) > defines a safe group of clients. The shorter unsafe client-id is sufficient in client metrics and logs, but quotas should be allocated to safe groups to avoid clients of one user throttling clients of another user with the same client-id.
...
- Quota configuration for user principal. This prevents users generating heavy traffic from monopolizing resources and impacting the performance of other users in a multi-tenant cluster.
- Sub-quotas Quota overrides for clients of an authenticated user. Like the current client-id implementation, this enables a user to rate-limit some producers or consumers to ensure that they don’t impact other more critical clients. For instance, users may be able to rate-limit an auditing client running in the background, leaving resources always available for a critical event processing client.
- Client-id quotas for users with unlimited without a user quota override. Existing quota configuration for client-ids will continue to be applied to users with unlimited quota, but these will be applied as per-user quota for clients that share both user principal and client-id.Shared quotas for groups of clients that span multiple users will no longer be supportedif no user-specific defaults are configured. Defaults may also be specified for client-ids that do not span multiple users.
The goal of this KIP is to provide a single unified quota implementation with a simple configuration for client-id based quotas, a similar simple configuration for user quotas and the flexibility to define more complex quota configurations.
Public Interfaces
...
Overview
Quotas are currently configured for client-ids. All clients with the same client-id are currently grouped together as a quota entity, enforcing one quota for all clients with the same client-id. This KIP proposes to define quotas for safe client groups which share the same user-principal and client-id. In a single user cluster, this retains the current semantics of client-id quotas.
Configuration Options
Two new configuration options will be added to specify default producer and consumer quotas for users. The existing default configuration options for client-id quotas will be applied only if default user quota is unlimited.
New properties
quota.user.producer.default, quota.user.consumer.default:
Default quota for producers/consumers of users without a user quota override. This will be set to unlimited quota (Long.MaxValue
) by default.
Changes to existing properties
quota.producer.default, quota.consumer.default
: Default client-id producer/consumer quota is currently applied to each unique client-id across all users. This will be modified to be a per-user quota for each unique client-id of each user. This client-id
default will is applied only if default user quota is unlimited.
Default configuration
- All clients have unlimited quota by default
- If
quota.user.producer.default, quota.user.consumer.default
are set, these default quotas are allocated to each user principal. - If
quota.user.producer.default, quota.user.consumer.default
are unlimited,quota.producer.default, quota.consumer.default
are allocated to each unique client-id of each user.
Metrics
Quota related metrics are currently generated for client-ids and use the tag client-id
. The metrics tag will be changed to quota-id
and the value will include base-64 encoded user principal.
Sensor names are currently a sensor type concatenated with the client id value, eg. FetchThrottleTime-clientA. This will be modified to use quota-id
instead of client-id
. This is not a public interface change since sensor names are not reflected in JMX metrics.
Tools
kafka-configs.sh
will be extended to support authenticated user quotas and sub-quotas for clients of a user. A new entity type “users
” will be added. The key-value pairs supported for users
will be:
producer_byte_rate
: The total rate limit for the user’s producersconsumer_byte_rate
: The total rate limit for the user’s consumersclient_producer_byte_rates:
Comma separated list of reserved sub-quotas for client-ids of the user (eg. clientA:10,clientB:20). Clients not listed share the remaining quota of the user.client_consumer_byte_rates:
Comma separated list of reserved sub-quotas for client-ids of the use. (eg. clientA:30,clientB:40). Clients not listed share the remaining quota of the user.
The existing entity type "clients
" will be retained for backward compatibility. But quotas set for clients are used only for users without a config override and only if default user quota is unlimited.
Proposed Changes
User Principal
Authenticated user principal will be obtained from the Session
object. Base64-encoded hex string version of the Principal will be used so that it can be used as a node name in Zookeeper and in metrics without placing any restrictions on the characters allowed in the principal. For PLAINTEXT, the principal is "anonymous
" by default and quotas will be applied for that principal. But principal can be overridden using a custom principal builder even for PLAINTEXT, enabling different user quotas, for example, for connections from different IP addresses.
Quota Configuration
Quotas are currently configured as rate limits for producers and consumers based on their client-id. Default rate limits can be configured for clients without a config override.The same set of limits will be configurable each quota-id.
Quota configuration for a client with client-id clientX and user principal userN is determined by the following sequence (this example is for producer, similar sequence is applied to consumer):
- If client-id sub-quota override is defined for clientX of userN, this sub-quota is allocated for the sole use of (userN, clientX).
- If user quota override is defined for userN, clientX shares this quota with other clients of userN
- If
quota.user.producer.default is
not unlimited, clientX shares this default quota with other clients of userN - If client-id quota override is defined for clientX, this quota is allocated for the sole use of (userN, clientX)
- If
quota.producer.default is
configured, this default quota is allocated for the sole use of (userN, clientX) - Client is not throttled
Use cases:
- Simple client-id based quotas are configured using client-id quota override and
quota.producer.default :
(steps 4, 5, 6) - Simple user-principal based quotas are configured using user quota override and
quota.user.producer.default :
(steps 2, 3, 6) - Hierarchical quotas can be set using sub-quotas and combinations of user/client-id quotas and defaults : (steps 1 - 6)
Code Block | ||||
---|---|---|---|---|
| ||||
// Quotas for user1 (without sub-quotas).
// Zookeeper persistence path /users/<encoded-user1>
{
"version":1,
"config": {
"total" : {"producer_byte_rate":"1024","consumer_byte_rate":"2048"}
}
}
// Quotas for user2 with sub-quotas for clients.
// Zookeeper persistence path /users/<encoded-user2>
{
"version":1,
"config": {
"total" : {"producer_byte_rate":"4096","consumer_byte_rate":"8192"},
"clients": {
"clientA" : {"producer_byte_rate":"10","consumer_byte_rate":"20"},
"clientB" : {"producer_byte_rate":"30","consumer_byte_rate":"40"}
}
}
// Quotas for client-id clientA of users without config override if default user quota is unlimited.
// Zookeeper persistence path /clients/clientA
{
"version":1,
"config": {
"producer_byte_rate":"100",
"consumer_byte_rate":"200"
}
}
|
In the sample configuration above:
- Total rate limits for all clients with user principal user1 is (1024, 2048).
- Total rate limits for all clients with user principal user2 is (4096, 8192).
- The rate limits for clients with user principal user2 AND client-id clientA is (10, 20).
- Clients of user2 with client-id other than clientA and clientB share the remaining quota (4056, 8132).
- Total rate limits for all clients of user3 is (
quota.user.producer.default, quota.user.consumer.default
) configured in server.properties, since no config override is specified. - If default user quota is unlimited, clients of user3 use client-id quota configuration. For example quota for client-id clientA of user3 is (100, 200). And quota for client-id clientB of user3 without a client-id override is (
quota.producer.default, quota.consumer.default
)- In a single-user cluster, this provides the same semantics as the current
client-id
implementation - In a multi-user cluster, quotas are now per-user, treating clientA of user4 as a different group from clientA of user2.
- In a single-user cluster, this provides the same semantics as the current
Quota Identifier
Quota configuration and metrics currently use client-id
as the unique key, enforcing one quota for all clients with the same client-id
. This will be replaced with a new quota-id
that includes user principal. Each quota-id
is associated with a pair of producer and consumer rate limits which may be config overrides or the default quota.
quota-id
is the concatenation of base64-encoded user principal and client-id. Clients-ids without a sub-quota override share the user's quota and hence use the encoded user principal asquota-id
.- In the example (non-encoded user principal is used here for readability):
- All clients of user1 share the quota-id user1
- clientA of user2 uses the quota-id user2clientA
- clientC of user2 uses the quota-id user2 since it does not have a client quota override, sharing a quota with other clients of user2.
- clientA of user3 uses the quota-id user3clientA
Quota Persistence in Zookeeper
...
can be set at <user, client-id
>, user
or client-id
levels. For a given client connection, the most specific quota matching the connection will be applied. For example, if both a <user, client-id
> and a user
quota match a connection, the <user, client-id
> quota will be used. Otherwise, user
quota takes precedence over client-id
quota. The order of precedence is:
/config/users/<user>/clients/<client-id>
/config/users/<user>
/config/users/<default>/clients/
<client-id>
/config/users/<default>/clients/<default>
/config/users/
<default>
/config/clients/<client-id>
/config/clients/
<default>
Quota Entity
Quotas are currently configured for client-ids. All clients with the same client-id are currently grouped together as a quota entity, enforcing one quota for all clients with the same client-id. This KIP proposes to define quotas for safe client groups which share the same user-principal and client-id and user-level quotas that limit the total quota of users in addition to the existing client-id quotas.
Configuration Options
Default quotas for users and client-ids will be added as dynamic properties. The existing default configuration options for client-id quotas will be deprecated and these properties will be applied only if default user quota is unlimited and the dynamic client-id defaults are not specified.
Deprecate static properties for client-id default quotas
quota.producer.default, quota.consumer.default
: Default client-id producer/consumer quota is currently applied to each unique client-id across all users. This client-id
default will be applied only if default user quota is unlimited and no user-specific defaults are configured. These properties will be deprecated and will be applied only if dynamic default quotas are not configured for clients.
Dynamic configuration for default quotas
- Default quota for
<user, client-id>
will be stored in Zookeeper at/config/users/<default>/clients/<default>.
- Default user quota will be stored in Zookeeper at
/config/users
/<default>
. - Default client-id quota will be stored in Zookeeper at
/config/clients
/<default>
. If not specified, the broker propertiesquota.producer.default, quota.consumer.default
will be used as the default client-id quota for clients of users with unlimited quota.
Metrics
Quota related metrics are currently generated for client-ids and use the tag "client-id
". URL-encoded user principal will be added with the tag "user".
Both user and client-id tags will be specified when <user, client-id>
quotas are applied, only user
tag will be specified if user quota is applied and the existing client-id
tag will be retained if client-id quotas are applied.
Sensor names are currently a sensor type concatenated with the client id value, eg. FetchThrottleTime-clientA. This will be modified to use quota-id
instead of client-id
. This is not a public interface change since sensor names are not reflected in JMX metrics.
Tools
kafka-configs.sh
will be extended to support authenticated user quotas and specific quotas for <user, client-id>
. A new entity type “users
” will be added with the same key-value pairs as the existing "clients
" entity type:
producer_byte_rate
: The total rate limit for the user’s producers without a client-id quota overrideconsumer_byte_rate
: The total rate limit for the user’s consumers without a client-id quota override
For example:
bin/kafka-configs --zookeeper localhost:2181 --alter --add-config 'producer_byte_rate=1024,consumer_byte_rate=2048'
--entity-name user1
--entity-type users
Default quotas for users or clients or <user, client-id> can be configured by omitting entity name. For example:
bin/kafka-configs --zookeeper localhost:2181 --alter --add-config 'producer_byte_rate=10000,consumer_byte_rate=20000'
--entity-type users
Quotas for clients of a user can be configured by specifying entity types "users"
and “clients
” in the same command line . For example, the following command sets quotas for <user2, clientA>
:
bin/kafka-configs --zookeeper localhost:2181 --alter --add-config 'producer_byte_rate=10,consumer_byte_rate=20' --entity-name clientA --entity-type clients --entity-name user2 --entity-type users
The existing entity type "clients
" will be retained to set client-id
quotas which are used when user quotas are not overridden.
Proposed Changes
User Principal
Authenticated user principal will be obtained from the Session
object. URL-encoded string version of the Principal will be used so that it can be used as a node name in Zookeeper and in metrics without placing any restrictions on the characters allowed in the principal. Characters that cannot be used for Zookeeper node names or metrics (eg. *) will be percent-encoded. Encoded user principal will be cached in Session.
For PLAINTEXT, the principal is "ANONYMOUS" by default and quotas will be applied for that principal. But principal can be overridden using a custom principal builder even for PLAINTEXT, enabling different user quotas, for example, for connections from different IP addresses.
Quota Configuration
Quotas are currently configured as rate limits for producers and consumers based on their client-id. Default rate limits can be configured for clients without a config override. The same set of limits will be configurable each quota-id.
Quota configuration for a client with client-id clientX and user principal userN is determined by the following sequence (this example is for producer, similar sequence is applied to consumer):
- If quota override is defined for <userN, clientX> in
/config/users/userN/clients/clientX
, this quota is allocated for the sole use of <userN, clientX>. - If user quota override is defined for userN, clientX in
/config/users/userN
shares this quota with other clients of userN - If <user, client-id> quota is defined in
/config/users/<default>clients/clientX
, this quota is allocated for the sole use of <userN, clientX> - If default <user, client-id> quota is defined in
/config/users/<default>clients
/<default>
, this quota is allocated for the sole use of <userN, clientX> - If default user quota is defined in
/config/users/
, clientX shares this default quota with other clients of userN<default>
- If client-id quota override is defined for clientX in
/config/clients/clientX
, this quota is shared across client-id <clientX> of all users - If dynamic client-id default is configured in
/config/clients/
, this default quota is shared across client-id <clientX> of all users<default>
- If
quota.producer.default is
configured for the broker in server.properties, this is shared across client-id <clientX> of all users - Client is not throttled
Use cases:
- Simple client-id based quotas are configured using client-id quota override, dynamic client-id default and static
quota.producer.default :
(steps 6, 7, 8, 9) - Simple user-principal based quotas are configured using user quota override and user quota default
:
(steps 2, 5, 9) - More specific <user, client-id> quotas and defaults for users and client-ids can be configured if required: (steps 1 - 9)
Code Block | ||||
---|---|---|---|---|
| ||||
// Default user quota
// Zookeeper persistence path /config/users/<default>
{
"version":1,
"config": {
"producer_byte_rate":"10000",
"consumer_byte_rate":"20000"
}
}
|
Code Block | ||||
---|---|---|---|---|
| ||||
// Quotas for user1 (without client-id overrides).
// Zookeeper persistence path /config/users/<encoded-user1>
{
"version":1,
"config": {
"producer_byte_rate":"1024",
"consumer_byte_rate":"2048"
}
}
|
Code Block | ||||
---|---|---|---|---|
| ||||
// User-level quotas for user2
// Zookeeper persistence path /config/users/<encoded-user2>
{
"version":1,
"config": {
"producer_byte_rate":"4096",
"consumer_byte_rate":"8192"
}
}
// Quota override for <user2, clientA>
// Zookeeper persistence path /config/users/<encoded-user2>/clients/clientA
{
"version":1,
"config": {
"producer_byte_rate":"10",
"consumer_byte_rate":"30"
}
}
// Quota override for <user2, clientB>
// Zookeeper persistence path /config/users/<encoded-user2>/clients/clientB
{
"version":1,
"config": {
"producer_byte_rate":"20",
"consumer_byte_rate":"40"
}
}
|
Code Block | ||||
---|---|---|---|---|
| ||||
// Quotas for client-id clientA of users without user quota override.
// Zookeeper persistence path /config/clients/clientA
{
"version":1,
"config": {
"producer_byte_rate":"100",
"consumer_byte_rate":"200"
}
}
|
In the sample configuration above:
- Total rate limits for all clients with user principal user1 is (1024, 2048).
- Total rate limits for all clients with user principal user2 without additional client-id quota is (4096, 8192).
- The rate limits for clients with user principal user2 AND client-id clientA is (10, 20).
- Clients of user2 with client-id other than clientA and clientB share the quota (4096, 8192).
- Total rate limits for all clients of user3 is the default (
10000, 20000
), since no config override is specified. - If default user quota is not specified or is unlimited, clients of user3 use client-id quota configuration. For example quota for client-id clientA of user3 is (100, 200) and this is shared with clients of other users with client-id clientA. And quota for client-id clientB of user3 without a client-id override is (
quota.producer.default, quota.consumer.default
)- In a multi-user cluster, defaults can also be specified for
<user, client-id>
quotas which treat clientA of user4 as a different group from clientA of user2.
- In a multi-user cluster, defaults can also be specified for
Quota Identifier
Quota configuration and sensors currently use client-id
as the unique key, enforcing one quota for all clients with the same client-id
. This will be replaced with a new quota-id
that includes user principal. Each quota-id
is associated with a pair of producer and consumer rate limits which may be config overrides or the default quota.
quota-id
is the concatenation of url-encoded user principal and client-id for<user, client-id>
quota, just the client-id forclient-id
quotas and just the encoded user principal foruser
quotas. Similarly, quota-related metrics names will include the tagsclient-id
and/oruser
.- In the example:
- All clients of user1 share the quota-id user1:
- clientA of user2 uses the quota-id user2:clientA
- clientC of user2 uses the quota-id user2: since it does not have a client quota override, sharing a quota with other clients of user2.
- clientA of user3 uses the quota-id :clientA
Quota Persistence in Zookeeper
Client-id based quota configuration overrides will continue be stored under /config/clients,
but these will be applied only to clients of users without a quota override and only if default user quota is unlimited. Quota configuration overrides for user principals will be stored under /config/users/<user>
. Note that url-encoded version of the user principal will be used as node name under /config/users
to cope with Zookeeper naming restrictions. Default user quotas will be stored under /config/users
/<default>
. Quota overrides for clients of a user will be stored under /config/users/<user>/clients
.
Configuration change notifications will be generated for changes to quota configuration similar to the current notifications for client-id
quotas. JSON for change notification will be modified to provide entity path instead of specifying entity type and name separately.
Code Block | ||||
---|---|---|---|---|
| ||||
// Change notification for default user quota
{
"version":2,
"entity_path": "users/<default>"
}
// Change notification for user quota of user1
{
"version":2,
"entity_path": "users/user1"
}
// Change notification for quota of <user2, clientA>
{
"version":2,
"entity_path": "users/user2/clients/clientA"
}
// Change notification for default client-id quota
{
"version":2,
"entity_path": "clients/<default>"
}
// Change notification for client-id quota of clientA
{
"version":2,
"entity_path": "clients/clientA"
} |
Tools
kafka-configs.sh
will be extended to support a new entity type "users".
Quota configuration for users will be provided as key-value pairs to be consistent with other configuration options. Hence no new command line arguments will be added to the tool. The tool will parse the key-value pairs specifying total user quota and possibly some client sub-quotasrate limits, validate these and convert them to the equivalent JSON for persistence in Zookeeper. The existing entity “clients
” will continue to be supported to set client-id quotas for users with unlimited quotato set client-id quotas for users with unlimited quota. The tool will be extended to accept multiple entity types to configure <user, client-id> quotas. The tool will also be updated to configure default quotas (/config/users/
<default>
, /config/clients
/<default>
, /config/users
/<default>/clients/
).<default>
Compatibility, Deprecation, and Migration Plan
No client API changes are necessary to work with the new implementation. Existing client-id quota configuration will be processed from Zookeeper and since users have unlimited quota as default, existing client-id quotas will be applied to all clients with the client-id. In a PLAINTEXT or single-user cluster, this provides the same semantics as now, but in a multi-user cluster, quotas will be applied per-user rather than across users. For multi-user clusters that are currently using client-id rate limits, new per-user rate limits should be configured first before upgrading the cluster if shared rate limits are being used for clients of different users existing client-id quotas will be applied to all clients with the client-id.
Rejected Alternatives
Broker configuration property to choose either client-id or user quota
...