Getting ready to contribute to NetBeans

Adhere to the ASF Code of Conduct

Please read the Apache Software Foundation Code of Conduct and adhere to it. Pull Requests that violate the ASF Code of Conduct will be rejected.

Your PR may take time to be reviewed by a committer, specially during release phases, so be patient.

Bootstrapping (needs to be done only once)

Initial Git setup

Please make sure git config contains Since you don't have write permissions to the github apache mirror, you need to fork https://github.com/apache/incubator-netbeans locally.
You need to clone the forked repository and setup your name and email in github. This will also help git to rebase in order to fulfill its task.. You can quickly check your system wide config by typing:

git config --list --global

If the information is not correct you can update it with:

git config --global user.name "John Doe"

git config --global user.email "john@doe.org"

(it is also possible to access the global git config file via NetBeans, Team → Git → Open Global Configuration)--globalcan be removed if you want to setup only the current repository.

(it is also possible to setup this on a per-repository basis, for that, setup the repository first following the steps below, then use git config without the --global option)

Initial Repository setup:

On a high level, you want to work using local branches and mirror them to your NetBeans fork on github. Once you are happy with a change, you would open a pull request (PR) to offer the change to be integrated into the main repository.

1) fork the NetBeans repository on GitHub (https://github.com/apache/netbeans) (if you are asked to enable github actions, leave them disabled for now)

2) clone your newly forked repository into a local copy

Assuming your fork is at https://github.com/YOUR_USERNAME/netbeans.git you can clone the forked repository to a local folder using the following command

git clone https://github.com/YOUR_USERNAME/netbeans.git

Optional: your remote fork carries the origin alias. To remember the main repository too, you can add it as upstream aliasAlso add the Apache NetBeans incubator project as your upstream in order to submit PRs:

git remote add upstream https://github.com/apache/incubator-netbeans.git

Note: the guide here will always use full URIs instead of aliases to avoid accidents due to ambiguities or differences in local setups.

Use branches

You need to create a Pull Request for to offer a fix or a new feature . Pull Requests are not fixed in time. If you change your history the PR will be impacted.to be integrated into the main repository.

A  A PR will be reviewed by committers and they may ask you additional work.To ease your work it's better changes. This is an asynchronous process and it helps to create a branch per feature that you want to submit as Pull Request.

Creating and pointing at a new branch from master requires 3 those steps:

1. git checkout master

2. git pull https://github.com/apache/netbeans.git master

3. git branch mywork

4. git checkout mywork

You may then implement your changes, commit them and push the branch to your forked repository:

1. git push https://github.com/YOUR_USERNAME/netbeans.git mywork:mywork

You can then use the github UI to create a Pull request from your branch.

(git should print a direct link to the new PR page if this command succeeds, the github page of your fork should now also have a big green create PR button on top)

PR guide on github: https://help.github.com/articles/creating-a-pull-request/

You will need an ICLA (Individual Contributor License Agreement) for important modifications.

The commit message related to JIRA issue must start with [NETBEANS-<issue number>]

Note: If you are a committer, please read the CI section of the reviewer guide before pressing the create PR button.

Squashing commits on a Pull Request

Before submitting your Pull Request it should ideally consist of a single commit only. Consider you've done the following on your branch:

[NETBEANS-xxx] Improved YAML lexer

Improved ability for night vision and
the robustness on I/O errors.

Oops, forgot to include lic file

Javadoc update - corrected spelling

If the PR is merged into master as-is then all these commits will be in the master too, forever. Therefore, in this example, all three commits should be squashed into one so that only X is left.

...

After submission (and certainly after someone starts reviewing the PR) you shouldn't touch the PR's history .

Keeping your own fork in sync with Apache GitHub repo

<to be described :  possible link we can use: https://help.github.com/articles/syncing-a-fork/>

git fetch upstream

git checkout master

git merge upstream/master

Tip: Syncing your fork only updates your local copy of the repository. To update your fork on GitHub, you must push your changes

...

(unless instructed to do so).

(Some larger PRs might be merged with multiple commits, but those are usually an exception to the rule. In any case make sure every individual commit is buildable and testable to avoid problems during git bisections and bugfixing)

Updating a stale Pull Request

Over time your Pull Request is likely to go stale. A "stale" pull request is one that is no longer up to date with the main line of development, and it needs to be updated before it can be merged into the project. This typically happens because there 've meanwhile been changes in the main branch on the same files that are included in the PR, thus resulting in a merge conflict.<to be described :  possible link we can use:

First, make sure you are in the right branch

git checkout mywork

warning: this will rewrite PR history and move your PRs on top of a freshly updated branch, do this only if reviewers are ok with it:

warning: this might result in conflicts if the same files changed in the main repo as the files you were working on

git pull --rebase --autostash https://github.com/apache/netbeans.git master

Make sure everything is fine with git status / git log and that no conflicts need to be resolved. Resolving conflicts takes practice (e.g using a sandbox repo) and won't be explained here.

Finally, force push the changes into your PR branch of your fork:

git push -f https://github.com/YOUR_USERNAME/netbeans.git mywork:mywork

How to repair commits which have the wrong name/email in the header

if you already made a commit without configuring git properly, you can amend the last commit with:

git commit --amend --author="John Doe <john@doe.org>" --no-edit

Optional: Keeping your own fork in sync with Apache GitHub repo

switch to your local master branch and download latest changes from the main NetBeans repo

git checkout master

git pull https://github.com/

...

apache/netbeans.git master

git push https://github.com/YOUR_USERNAME/netbeans.git master

Note: Please make sure that you use CI resources responsibly. If you don't need github actions on your fork, don't enabled them. (they are off by default in fresh forks)

Good commit messages

A commit should:

1. describe what it is in one short sentence,
2. followed by an empty line,
3. followed by more details describing the change (often in bullet points "- blabla")

Especially the first line should not exceed 72 characters. (NB will mark this as red line in the commit dialog)

Multiple commit authors

A commit has one author and one committer (which may or may not be the same person). There is however a commit message convention which allows to attribute co-authors simply by appending them to the end of the commit message:

example message:

Fixed NPE in Foo#bar.

 - details
 - details
 - details

Co-authored-by: NAME <NAME@EXAMPLE.COM>
Co-authored-by: ANOTHER-NAME <ANOTHER-NAME@EXAMPLE.COM>"

...

Contribution Guidelines
Before starting to code, it is a good practice to open an issue (PTR) first and discuss it in the developer mailing list (Mailing lists), giving the reason for submitting your pull request so that it is clear and more experienced members can suggest appropriate solutions/ideas.
All commits must include the author's full name and email address. For important modifications you will need to submit an Individual Contributor License Agreement (ICLA) .
All new files must include the Apache Software Foundation license header. See any NetBeans source code in case of doubt.
All commits must contain a meaningful commit message. 
A meaningful commit message holds in the first line a summary of the commit and in the body (beginning on the third-line) an explanation of what was changed and why it was done.
Remember that in the future this commit message is most probably the only source of information why a change was committed to the code base.
If the commit fixes a reported issue, the summary line should hold the issue number and title "[NETBEANS-XXX] Maven pom.xml file corrupted after inserting dependecies" for example.
A Pull Request can consist of multiple commits. These commits should group the changes into meaningful entities. Fixup commits should be squashed into the base commit they fix.
For contributors: Be prepared to be asked questions about your PR. 
A reviewer might have questions and you should be able to answer why you did a fix in a certain way and why it is safe and appropriate.
Remember that the review sometimes takes as long, as creating a patch in the first place.
Good commit messages help as they anticipate questions.
For reviewers: Keep in mind that the contributor wants to fix a problem and has put effort into it. So be polite and focused.
Don't change code that is correct and works. 
Consider a simple loop. In many cases you can switch between for-loop, for-each-loop and stream construct. All are valid solutions, don't change the code if it is not broken.
An improvement is a different case. For example a try-with-resource construct is in general more correct than the try-finally construct which many developers fail to implement correctly.
Constructs leading to warnings from the javac are also good candidates for simple fixes.
Run unit tests and, if you introduce new feature/fixes, add unit tests. So before you start your work, check that unit tests for the module you are working on run correctly and after you are done keep doing.
If unit tests fail, fixing these would be a good addition to the code base (it would be good to use a separate commit for this)
Keep your pull requests up-to-date. When the PR can't be merged directly (it can happen that changes are introduced into the code base, that conflict with your PR) you should then update it accordingly.
Follow the coding conventions of the file. Your code should match that style and not stand out. For new files, please follow the code conventions for the NetBeans code base:  https://netbeans.org/community/guidelines/code-conventions.html
Try to keep the code readable, maintainable, easy to debug and performant.
And remember: These are guidelines, not laws.
Internationalization
If the source code might be translated to other languages then please add the comment `// NOI18N` to the string literals that must not be translated. Strings to be translated should be properly added to resource bundles.
If the source code is not to be translated then avoid adding `// NOI18N` comments to the string literals; this just adds clutter and makes the code less readable.