Page History

Camel 3.0 Ideas

This is a roadmap which details the overall and major goals for Camel 3.0. Fell free to discuss this at the Camel Mailing Lists if you have ideas or feedback.

The Camel PMC conducted a survey in Oct 2010 to get a better understanding of how Camel is used and what the priorities for Camel 3.0 should be.

Clearer Architecture of Camel Core

Goals:

• The camel components should know as little as possible about camel core
• The classes needed to setup camel should be separate from the things needed at run time

So why should this be important? Currently components depend on camel-core as a whole and there are no further rules which classes the components should use and which classes should be private to core. Even classes from the impl package are needed. So this means that any refactoring we do in camel core could affect all components. As camel is growing steadily this can become quite problematic.

Split camel-core into three parts:

api, builder, impl

These should be structured in a way that these big building blocks do not have cyclic dependencies. Any other cycles can be ignored in this step.

Allowed depdencies ( "->" means may use, may depend on):

• * -> api
• end user config code -> builder
• builder -> impl

Define scope and rules for camel-core packages

In extension to the previous paragraph each camel package should have a clear scope that defines what to put in the package and what not. There should be rules that define what dependencies are allowed for classes in a package. The minimum goal is to guarantee that by following the rules dependency cycles can not happen. Additionally the rules should minimize dependencies between packages to achieve loose coupling between packages and high coherence inside a package.

Routing engine optimization

The internal routing engine should be optimized. See more details at Camel 2.x Speed optimizations.

More flexible routes at runtime

When routes is added in Camel 2.x architecture, global cross cutting concerns such as error handlers, interceptors, onCompletion etc. is applied when the route is added. We need to separate this and have those applied during routing. The Channel needs to do this and therefore it must be more dynamic than its currently is. And we need to enlist the various global cross cutting concerns by their xxxDefintions in the CamelContext, so we can access them at any time. This allows end users also much more easily to add/remove interceptors, error handlers and whatnot at runtime. And it makes it much easier to add routes generated from JAXB or other sources, as we don't need to prepare or anyhow mold the RouteDefinition given. See ticket CAMEL-3024 for some details.

Route initialization logic for Java DSL and XML DSLs

The Java DSL does its route initialization slightly a bit different than the XML DSLs, due the nature of it, and the fact the fluent builders can do additional logic, which the JAXB model of XML DSLs does not. We should align the initialization logic so Java DSL and XML DSLs does the same thing. They setup the pure model at first. So the configure method in the RouteBuilder should setup the model as the XML DSL would do. Then the prepare route logic which follows could be the same in all cases. This would also allow us to ensure when people use multiple RouteBuilder classes in Java DSL, then context scoped onException, interceptors is applied for all RouteBuilders.

Add OnException, Interceptor, etc. to JAXB model for a CamelContextDefinition

Configuring context scoped onException, interceptors etc. is woven into the RouteDefinition as part of the route initialization logic. When we have a dynamic routing engine (see above) that can at runtime support this without the need for woven into the routes. Then we should also ensure the context scoped onException, interceptors etc. is available in a CamelContextDefinition. This ensures the models is always 100% kept as it was provided, and we can fully export the model to XML and other languages (having a supported render).

Tighten up route definitions

Currently cross cutting concerns such as error handlers, interceptors, onCompletion etc. can be define anywhere in the route. We should tighten this up and only allow this to be configured in the start of the route. This also ensures when end users use code assistance in their route development, the IDE will not popup a big list which includes these cross cutting concerns. See also next note. (ProcessorDefinition will therefore be trimmed)

Support for asynchronous transactions

When using the asynchronous routing engine it would be desirable of transactional context could be propagated to the new threads.
This requires the TX manager supports suspend/resume on the TX. G.Nodet have worked a bit on this. See CAMEL-2902. Also see CAMEL-2729.

With the Asynchronous Routing Engine it would be great if we could support asynchronous transaction as well. See CAMEL-2729 and CAMEL-2902

Remove @deprecated

@deprecated features, methods, etc. is to be removed.

Stream caching

We could add support for using HawtDB as the persistent store for streams which overflow to disk store.

EIP

The Resequencer EIP currently doesn't support persistence, we could introduce this and let it leverage HawtDB such as we did with the Aggregator2 EIP.

Schedule in DSL

We could consider adding DSL syntax sugar for scheduling routes. For example currently you have to use Quartz or a ScheduledPollingConsumer which has the delay option. We could add DSL which has something like:

schedule().every(5).minute().pollFrom("xxx").to("yyyy")

The hard part is to come up with a good DSL syntax. We can look at BAM and see what we got there as well.

The DSL should support both cron and non cron based, eg Quartz, Spring (spring 3 has cron) and regular JDK timers.

Fix routes with multiple inputs

The current implementation of routes with multiple inputs is to clone the route, which means you essentially got 2+ routes if a route has multiple inputs. However routes with multiple inputs is seldom used. The correct implementation is to only create one route but have multiple input consumers. This change will require a bit of change in current code as it relies on the only 1 input consumer on the route.

Up-to-date Scala DSL

Done in Camel 2.11

The Scala DSL is slightly out of date as we have improved the DSL a bit here and there. We should check the gap and ensure the Scala is up-to-date.

Camel is now almost 6 years old and its second revision camel-2.x is more than 4.5 years old already. Camel is extremely mature, used in production by a large number of organizations from small to large and even governments. We feel like we really hit the initial target of simplifying integration. Camel's middleware abstraction api and the eip based routing brought a lot of positive feedback from users.

There is however more that could be done to simplify the work of integration developers who need new components (not shipped with camel for licensing - copyleft of commercial - or other reasons) or new integration patterns or algorithms or even new tools. We learned a lot in the past years and benefited from a strong and continuously growing community. It's time to put what we learned to good use and re-engineer your favourite integration framework yet again.

The middleware abstractions look pretty solid, and aside from some possible reshuffling we don't expect major changes. As a consequence, most of the components will retain the same general feel. The core will however be rearchitected to become even more pluggable and modular. We will however spare no effort to make a new Camel 3 be as backward compatible as possible and when not possible at least provide a painless migration path.

This is a mindmap of ideas for improving Camel 3.0. Fell free to discuss this on the Camel Mailing Lists if you have other ideas or feedback.

Table of contents

JDK support

(+1: claus, cmueller, mattrpav)
(-1: hadrian)

We should drop support for JDK6, and require JDK7 as minimim version. eg build and compile the release with JDK7.
We should aim to be compatible with JDK8.
(hz) Why? Isn't OpenJDK 6 still supported by RedHat and very much in use? Even Oracle's Java 6 is still in use. Maybe some bundles would require JDK7+, buy why not keep things like the api for instance still supported with Java 6? A strong argument may sway my opinion, but for now, I fail to see the reason.

(mattrpav) Consider JDK8 as the base. By the time Camel 3 is stable and ready for wide-spread use, the transitive deps will have caught up. A number of suggestions below target JDK8 features, and all would require an "add-on" approach to maintain JDK7 backward compat. 

JDK8 Java DSL

It would be good to have a camel-java8-dsl component that offers a JDK8 DSL which uses all the nice new stuff from JDK8 with higher order functions, closures, et all.
Though this may comes later in Camel 3.x when JDK8 is GA.
At least stuff like Predicate, Expression, AggregationStrategy etc. are "functional interfaces" (containing only one method) and Java 8 applications can implement them using lambdas. That's only a start, but it doesn't require a specific DSL.

Routing Core Re-engineering (raulk)

The routing core of Camel 2.x is heavily based on a recursive call pattern, where Processors are responsible for calling the next one along the chain. This results in lengthy and meaningless stacktraces (difficult to make sense out of and debug for newcomers) and higher memory usage due to retention of local variables for a longer time than strictly needed.

Moreover, Camel weaves a large number of "plumbing" processors along the way which should not really be processors because they form part of the very essence of the routing core, e.g. error handlers, stream caching interceptors, trace interceptors, async processor helpers, MDC, etc.

The proposal is to shift towards an iterative model, by redesigning the logic of Camel routing. The suggested model is defined by these pillars:

• A single class, or a limited set of them, contain the routing logic of Camel. Package name: org.apache.camel.core.routing. Central (abstract) class: RoutingCore. Concrete realisations could be: PipeliningRoutingCore, MulticastRoutingCore, depending on the fundamental routing pattern.
• The RoutingCore iteratively calls the routing steps, one after another. The routing steps return their result to the RoutingCore, who is in charge of calling the next element subsequently. OUT and IN are bridged if necessary (PipeliningRoutingCore).
• The Processor interface is crumbled up into its many specialisations, each of which represents a distinct concept of the Camel framework: RoutingDecider (EIPs should only take decisions about the routing, but not perform the routing itself, e.g. choice, filter, loop, throttle, etc.; see examples in subsection below.), Actions, ErrorHandler (already exists), Interceptor, etc.
• The RoutingCore is responsible of all the "magic" now disseminated across a number of processors. Assisted by Helper classes.

The goal of this idea isn't to zap off recursion altogether, just to consolidate the routing logic into a handful of cornerstone classes.

Camel is no longer a baby and the framework concepts are well mature, thus they should be transferred to the API and avoid making everything a raw Processor.

Converting some EIPs from "performers" to mere "deciders"

• choice() => evaluates the predicates and returns the List of Processors or Endpoints to invoke.
• filter() => same as choice(), but returning null if the filter doesn't match, to continue to the next routing step.
• loop() => evaluates whether the looping control predicate still stands. If yes, it returns the processors to invoke, where the last is itself (to trigger the looping logic again); else, it returns null to continue to the next routing step.
• throttle() => pauses accordingly and then returns the endpoint/processors to invoke.
• ...

Clearer Architecture of Camel Core

Goals:

• The camel components should know as little as possible about camel core
• The classes needed to setup camel should be separate from the things needed at run time
• Camel Core should be tiny as possible and only contain what really is core

So why should this be important? Currently components depend on camel-core as a whole and there are no further rules which classes the components should use and which classes should be private to core. Even classes from the impl package are needed. So this means that any refactoring we do in camel core could affect all components. As camel is growing steadily this can become quite problematic.

Split camel-core into multiple parts (hadrian)

(+1: cmueller, hadrian, claus)

Claus: Important to be 99+% backwards compatible with Camel 2.x.

There are multiple benefits and less constraints. A separate api jar would allow the definition of a 'route container' which is currently one of the roles of the CamelContext. This allows primarily alternative implementations of camel for constrained environments (such as real time systems, for instance). Processors/Routes/Components written against the api could be deployed on any camel implementation (as long as all necessary features are supported).

• api
• dsl/builder
• impl
• ...

These should be structured in a way that these big building blocks do not have cyclic dependencies. Any other cycles can be ignored in this step.

Allowed depdencies ( "->" means may use, may depend on):

• * -> api
• end user config code -> builder
• builder -> impl

Avoid shading google concurrent linked map in camel-core

The shaded Google concurrent map should IMHO be pluggable, so people can run without this as default. And then people can install that google JAR on their classpath and Camel can pickup and use that. This JAR only helps in SMX/Karaf installations when having concurrent startup of many Camel apps. For regular users this does not bring any benefits to the table. This can help slim down the size of the camel-core JAR.

We can either auto detect the google class, as people did in the past with JDK1.3/1.4 and the apache commons collection. eg using commons collection on JDK1.3 and not in JDK1.4 as it had that out of the box.

Define scope and rules for camel-core packages (champion?)

In extension to the previous paragraph each camel package should have a clear scope that defines what to put in the package and what not. There should be rules that define what dependencies are allowed for classes in a package. The minimum goal is to guarantee that by following the rules dependency cycles can not happen. Additionally the rules should minimize dependencies between packages to achieve loose coupling between packages and high coherence inside a package.

More flexible routes at runtime (claus)

(+1: hadrian)

When routes is added in Camel 2.x architecture, global cross cutting concerns such as error handlers, interceptors, onCompletion etc. is applied when the route is added. We need to separate this and have those applied during routing. The Channel needs to do this and therefore it must be more dynamic than its currently is. And we need to enlist the various global cross cutting concerns by their xxxDefintions in the CamelContext, so we can access them at any time. This allows end users also much more easily to add/remove interceptors, error handlers and whatnot at runtime. And it makes it much easier to add routes generated from JAXB or other sources, as we don't need to prepare or anyhow mold the RouteDefinition given. See ticket CAMEL-3024 for some details.

Fix routes with multiple inputs (claus)

The current implementation of routes with multiple inputs is to clone the route, which means you essentially got 2+ routes if a route has multiple inputs. However routes with multiple inputs is seldom used. The actual solution will depend on the api refactoring.

Route initialization logic for Java DSL and XML DSLs (claus)

The Java DSL does its route initialization slightly a bit different than the XML DSLs, due the nature of it, and the fact the fluent builders can do additional logic, which the JAXB model of XML DSLs does not. We should align the initialization logic so Java DSL and XML DSLs does the same thing. They setup the pure model at first. So the configure method in the RouteBuilder should setup the model as the XML DSL would do. Then the prepare route logic which follows could be the same in all cases. This would also allow us to ensure when people use multiple RouteBuilder classes in Java DSL, then context scoped onException, interceptors is applied for all RouteBuilders.

Add OnException, Interceptor, etc. to JAXB model for a CamelContextDefinition (claus)

Configuring context scoped onException, interceptors etc. is woven into the RouteDefinition as part of the route initialization logic. When we have a dynamic routing engine (see above) that can at runtime support this without the need for woven into the routes. Then we should also ensure the context scoped onException, interceptors etc. is available in a CamelContextDefinition. This ensures the models is always 100% kept as it was provided, and we can fully export the model to XML and other languages (having a supported render).

Tighten up route definitions (claus)

Currently cross cutting concerns such as error handlers, interceptors, onCompletion etc. can be define anywhere in the route. We should tighten this up and only allow this to be configured in the start of the route. This also ensures when end users use code assistance in their route development, the IDE will not popup a big list which includes these cross cutting concerns. See also next note. (ProcessorDefinition will therefore be trimmed)

Message History EIP/Message Store (Christian Ohr)

This has been moved to its own Wiki page.

Dependency Upgrades

We should upgrade Jetty to 8.x as minimum. And if possible support Jetty 9.x which is in the works.
Currently we are stuck on 7.x due CXF / Karaf etc uses that old version, and thus we have been good citizen to align and use same version.
AMQ is also using older Jetty, but that is easier to upgrade as well.

JMX naming

(+1: cgeer)

We should avoid using the hostname in the JMX MBeans as its better to have a consistent naming that tooling and other parties can rely on. Having the hostname in there just add complexity to the mix. Also Camel may quote the MBean name for the CamelContextMBean and use " " in the mbean name, as the only mbean in there. (will need to double check exactly which mbean it was).

We should consider improve on this.

Remove not used components

We should consider removing

• camel-bam
• camel-msv
• org.apache.camel.view from came-core

• dot maven generator

• ... (there could be other stuff to remove)

The BAM has not changed in 5 years, and very seldom used by end users. And neither has the functionality you need. There is much better solutions outside ASF Camel for a BAM solution.
The DOT generator is not up to date and maintained. Also it requires binary generator to generate a route diagram; we never managed to find a good java library for that.

The MSV component is never/rarely used, and is causing some issues for cutting releases, due some weird maven issues / download of JARs etc. And the codebase has basically been left unchanged for 5+ years now.

Split camel-cxf into WS and REST

The camel-cxf component has grown too fat and has too many dependencies. People would like to use a light-weight RS. We have already talked on Camel @dev about splitting camel-cxf into a WS and RS modules. As well refactor the code-base as there is potential overlap with CXF itself and stuff to be removed/trimmed/optimized etc.

We can have a camel-cfx-core where we can have shared logic if that makes sense.

Old ideas

To be better defined and moved to the section above or removed

Support for asynchronous transactions

When using the asynchronous routing engine it would be desirable of transactional context could be propagated to the new threads.
This requires the TX manager supports suspend/resume on the TX. G.Nodet have worked a bit on this. See CAMEL-2902. Also see CAMEL-2729.

With the Asynchronous Routing Engine it would be great if we could support asynchronous transaction as well. See CAMEL-2729 and CAMEL-2902

Stream caching

We could add support for using HawtDB as the persistent store for streams which overflow to disk store.
This might be implemented with the message store when it is used for stream caching.

EIP

The Resequencer EIP currently doesn't support persistence, we could introduce this and let it leverage HawtDB such as we did with the Aggregator2 EIP.
This might be implemented with the message store when it is used for temporarily saving exchanes until they are in order.

Schedule in DSL

We could consider adding DSL syntax sugar for scheduling routes. For example currently you have to use Quartz or a ScheduledPollingConsumer which has the delay option. We could add DSL which has something like:

schedule().every(5).minute().pollFrom("xxx").to("yyyy")

The hard part is to come up with a good DSL syntax. We can look at BAM and see what we got there as well.

The DSL should support both cron and non cron based, eg Quartz, Spring (spring 3 has cron) and regular JDK timers.

Advanced Scala support

-1: claus

...

A proposal for advanced Scala support is scalaz-camel which is an alternative to Camel's existing Scala DSL.

...

Currently its only the Routing Slip, Recipient List and Dynamic Router which are avail as @annotation as well. We could add more EIPs as annotations such as Splitter.
And also maybe annotations for AggregationStrategy to make this less Camel API dependent, so you can use a plain POJO for that.

Unified statisticsstatistics

-1: claus, mattrpav. We keep the JMX API and ppl can use jolokia for REST over JMX etc.

Currently the performance statistics is only avail when using JMX. We should allow those stats to be enabled regardless if JMX is enabled or not. Then we can use those stats from the web console. This also allows to expose those stats in the cloud where JMX is often not possible to be used.

...

We already have REST support with CXFRS and Restlet but it can be better. We should make sure those components is dead easy to use and you can invoke REST services in one line of code etc. And we should make more examples and tidy up the CXFRS documentation.

More load tests

More load tests for frequently used Camel components (jetty, jms ...) and camel-core.

• Ensure correct behaviour under load
• Source for performance numbers (throughput etc).
• Detection of memory leaks
• Detection of performance decreases after refactorings
• ...

Faster unit tests

...

one line of code etc. And we should make more examples and tidy up the CXFRS documentation.

More load tests (cmueller, +1 mattrpav)

More load tests for frequently used Camel components (jetty, jms ...) and camel-core. If we have an defined runtime environment which is in general accessable/available for all users (like a public image on Amazon EC2) and a data store for the performance numbers, than we could easily collect and share the numbers.

• Ensure correct behavior under load
• Source for performance numbers (throughput etc).
• Detection of memory leaks
• Detection of performance decreases after refactorings
• ...

OSGi enhancements

• create a single type converter registry available as OSGi service to all bundles serving as a single registry to lookup converters or to add/remove converters from custom bundles.

Easier commit/rollback for component developers

Maybe expose some interface having commit / rollback methods to make it easier for component developers to implement custom logic. Currently they may not know about OnCompletion and how to use UnitOfWork on Exchange to do this today.

Unify uri/ref

Instead of having both uri and ref for endpoints, we should unify this and only use uri. If people want to use ref, then they can do that using "ref:xx" as an uri. This would simplify code as we dont have to check for either one.

Less Spring dependencies

DONE in Camel 2.9

In camel-core we use the Spring JMX annotations to more easily enlist our MBeans. We should move that logic to camel-spring. And introduce a Camel specific annotations to replace those. For example ActiveMQ does that. This allows us to use camel-core with JMX without any spring JARs at all. End users can still use the Spring JMX annotations in their custom code / components. They just need camel-spring on the classpath.

Likewise we should move the ResourceEndpoint from camel-spring to camel-core. This ensures that resource loading on classpath works with Camel as we can leverage the ClassResolver. For example OSGi blueprint does not work with the Spring ResourceEndpoint. Also this ensures the components that uses ResourceEndpoint will no longer be dependent on Spring.

Then we are down to have Spring JAR dependency in: camel-jms and camel-mail.

Introduce Camel JMX annotations

DONE in Camel 2.9

See above about less Spring dependency.

Refactor UnitOfWork

The implementation of DefaultUnitOfWork seems to have transformed itself into a to broad concern where unit of work is doing a bit more work than the transactional aspect that ties to its name.
Maybe this implementation should be named ExchangeContext and we can introduce a simpler UnitOfWork concept. This would also allow us to refactor the SubUnitOfWork into a general parent/child unit of work concept.
However this requires API changes and thus is best kept for Camel 3.0

This is also needed by the refactor of the Message History EIP.

Improvements to ThreadPoolProfile for thread management

We could move ThreadPoolProfile from org.apache.camel.spi to org.apache.camel and have it in the root package.

Tighten up onException

We should consider tighten up the onException DSL a bit, for example to make it more clear that if you have processing steps in there, they only occur after the message has been exhausted. So maybe we need to have a onExhausted to make this clear

onException(IOException.class).maximumRedeliveries(3)
  .onExhausted().handled(true).to("log:ignoreMe");

So in this example its only after the 3 failed redeliveries, then its exhausted, and then we handle the message and route it to a log where we ignore the message.

Also currently you can do this:

onException(IOException.class).maximumRedeliveries(3)
  .handled(true);

Which will handle the message and after this let the error handler deal with the message. See CAMEL-5059.
We should in this case use a NoopProcessor so the message is handled, but the regular error handler does not react. Then its consistent.
However we have not changed this in Camel 2.x to keep backwards compatibility.

Likewise there has been ideas to move onRedeliverRef to <redeliveryPolicy> as currently its to be configured outside the policy.
It may make more sense to move onRedeliverRef to the policy to keep it together.

Add composite EIP to compose a number of EIPs into a single EIP

It would be nice if we have a DSL to compose a number of child EIPs into a single EIP itself. eg a bit like <pipeline>. This would allow people to make it easier to group together a number of EIPs into a single "unit". This allows for example the error handler to redeliver to the composite EIP instead of at the point of failure within the group. There are use-cases where people want to do that. And today the solution is to split this into a new route, which you then disable error handler by setting it to no error handler. And then call the route using the direct endpoint. So instead if you could do <composite> ... stuff goes here </composite> then that would be neater, as you dont have to split into multiple routes. I think there is an old JIRA ticket created about this a long time ago.

Message History EIP

We should make this EIP easier to use for end users, but offering a better public API. And also have a pluggable message store, which filters that can filter what should be store. As well pluggable marshallers so people can marshal data from Exchange into a format the message store can store (BLOB, XML, JSon etc.).

Light-weight web console

to do this today.

Refactor UnitOfWork

The implementation of DefaultUnitOfWork seems to have transformed itself into a to broad concern where unit of work is doing a bit more work than the transactional aspect that ties to its name.
Maybe this implementation should be named ExchangeContext and we can introduce a simpler UnitOfWork concept. This would also allow us to refactor the SubUnitOfWork into a general parent/child unit of work concept.
However this requires API changes and thus is best kept for Camel 3.0

This is also needed by the refactor of the Message History EIP.

Improvements to ThreadPoolProfile for thread management

We could move ThreadPoolProfile from org.apache.camel.spi to org.apache.camel and have it in the root package.

Tighten up onException

We should consider tighten up the onException DSL a bit, for example to make it more clear that if you have processing steps in there, they only occur after the message has been exhausted. So maybe we need to have a onExhausted to make this clear

onException(IOException.class).maximumRedeliveries(3)
  .onExhausted().handled(true).to("log:ignoreMe");

So in this example its only after the 3 failed redeliveries, then its exhausted, and then we handle the message and route it to a log where we ignore the message.

Also currently you can do this:

onException(IOException.class).maximumRedeliveries(3)
  .handled(true);

Which will handle the message and after this let the error handler deal with the message. See CAMEL-5059.
We should in this case use a NoopProcessor so the message is handled, but the regular error handler does not react. Then its consistent.
However we have not changed this in Camel 2.x to keep backwards compatibility.

Likewise there has been ideas to move onRedeliverRef to <redeliveryPolicy> as currently its to be configured outside the policy.
It may make more sense to move onRedeliverRef to the policy to keep it together.

Add composite EIP to compose a number of EIPs into a single EIP

It would be nice if we have a DSL to compose a number of child EIPs into a single EIP itself. eg a bit like <pipeline>. This would allow people to make it easier to group together a number of EIPs into a single "unit". This allows for example the error handler to redeliver to the composite EIP instead of at the point of failure within the group. There are use-cases where people want to do that. And today the solution is to split this into a new route, which you then disable error handler by setting it to no error handler. And then call the route using the direct endpoint. So instead if you could do <composite> ... stuff goes here </composite> then that would be neater, as you dont have to split into multiple routes. I think there is an old JIRA ticket created about this a long time ago.

Remove Spring transaction dependency from JMS component (Removed because SJMS will be non-spring version)

(+1: cgeer)

Refactor the JMS component to remove the dependency on Spring PlatformTransactionManager and replace with JTA TransactionManager.

Default to use Transacted mode by default

One thing I regret about the design of Camel was defaulting to non-transacted mode by default and forcing users to explicitly enable transactional model with a Transaction Manager.

It might be nice in Camel 3 to assume everything is transacted by default; and mimmick a form of transaction manager for non-transactional resource.

e.g. its pretty common to work with messaging like JMS and databases as a common set of endpoints; the easiest thing that could possibly work for end users is for those to just be transacted by default without the user having to grok how to tinker with component configurations & Transaction Manager registration.

Note I'm not advocating XA here; I think the default for camel should be for Idempotent Consumer and simple approach to middleware

Add trace information to the Camel exceptions

If and exception occurs, it would be helpful if the exception contains trace information like the passed endpoints/processors and the current endpoint/processor. We may could also extend the error handler to log (or not) this information.
That make it much easier to dig into the problem when we encounter an exception.

Avoid throws Exception on end user API

Important: The org.apache.camel.Processor should stay as is. This API has been like this since the first commit, and we should let it be backwards compatible.

But there is a number of end user APIs such as Service, eg when you call start on a CamelContext. It would be better to have that not throws Exception but use runtime exceptions if failed to start etc.

An API which uses unchecked exceptions is the ProducerTemplate which end users uses. So its nice and easy to use.
Another example would be Main and MainSupport where the run method throws exception etc.
There is possible other end user APIs which we can make a bit more friendlyA new lighter web-console that is using HTML5 technology instead of scalate or other heavier frameworks.
And the console should support discovering all the Camel's in the JVM, so you don't have to co-bundle the web console with every Camel app.
This allows to install the web-console as a WAR or OSGi bundle in any container; having it find the Camel apps in the same JVM.