Page History

DISCLAIMER!

This document provides instuctions for configuring a standalone VCL environment running on a single computer which is able to provision VCL reservations using VMware.  It is only provided to help you understand how the various components of VCL operate.  This document DOES NOT describe how to configure a production VCL environment.  The environment described in this document can however be used to learn, test, and help develop VCL.

Install VCL Components

Begin by completing the installation instructions for the VCL components:

• Database
• Web server
• Management node

Gather Required Files & Information

You will need the following:

...

These instructions assume you have root access and are using a bash shell:

Configure the VCL Database for the VM Guest and Host 

• Create the following computer groups:
  Go to Manage Groups -> Resource Groups -> Add
  • all vm host computers
  • all vm guest computers

...

• Configure the management node to check in with the database
  • Management Nodes -> Edit Management Node Information -> Add
    • Hostname: localhost
    • IP Address: 127.0.0.1
    • Owner: admin
    • State: available
    • Predictive Loading Module: Predictive Loading Level 0 Module
    • Check-in Interval: 5
    • Install Path: /install
    • End Node SSH Identitiy Key Files: /etc/vcl/vcl.key
    • SSH Port for this node: 22
    • Enable Image Library: no
• Add VM host computer:
  • Manage Computers -> Edit Computer Information -> Submit -> Add
    • Hosthame: localvmhost
    • IP Address: 192.168.0.1 (NOTE: there is currently a bug restricting the size of the field, so hopefully one octet has less than 3 digits.)
    • State: available
      Note: do not attempt to add the computer in the maintenance state because of the following issue:
      https://issues.apache.org/jira/browse/VCL-189
    • Owner: admin
    • Platform: i386
    • Schedule: VCL 24x7 
    • RAM: 1024
    • No Processors: 1
    • Processor Speed: 2000
    • Network Speed: 100 
    • Type: blade
    • Provisioning engine: xCAT 1.x
      Note: the Type and Provisioning engine values don't matter for the localvmhost computer in this test environment because vcld isn't provisioning it
    • Computer Groups: all vm host computers
• Add VM guest computer:
  • Manage Computers -> Edit Computer Information -> Submit -> Add
    • Hosthame: vmguest-1
    • IP Address: current public ip address used by Windows XP VM
    • State: available 
    • Owner: admin
    • Platform: i386
    • Schedule: VCL 24x7 
    • RAM: 1024
    • No Processors: 1
    • Processor Speed: 2000
    • Network Speed: 100 
    • Type: virtualmachine
    • Provisioning engine: VMWare Server Provisioning
    • Computer Groups: all vm guest computers
• Note the fix for the IP address bug is recorded here: https://issues.apache.org/jira/browse/VCL-193
• Configure the VM guest's MAC address in the computer table in the database (as there currently does not seem to be a way to do this through the UI):
  • eth0: 00:50:56:1a:01:01
  • eth1: 00:50:56:1a:01:02
• Configure the VM host profile:
  • Virtual Hosts -> VM Host Profiles tab -> VMware GSX standard -> configure Profile
    • Virtual Switch 0: VMnet1
    • Virtual Switch 1: VMnet0
• Change state of localvmhost to vmhostinuse (edit the database directly, do not use the Virtual Hosts utility on the website)
• Assign vm guests to localvmhost
• Create node in priviledge tree
  • Name: VM image access
  • Add resource groups:
    • all vm guest computers
    • all vm guest images

Remove Existing Virtualization Components

Make Sure The Host Computer Is Not Running A Xen Kernel

VMWare Server cannot be installed on a computer running a Xen kernel.  To determine if a Xen kernel is being used:

Install VMware Server

Download the latest VMware Server 1.x RPM from http://www.vmware.com
(Note: these instructions assume you saved the RPM into /install)

...

1. Press ENTER to view the license agreement, scroll to the bottom, type yes and press ENTER
2. Wiki MarkupIn which directory do you want to install the mime type icons? \
   [/usr/share/icons\] *ENTER*
3. Wiki MarkupWhat directory contains your desktop menu entry files?
   These files have a .desktop file extension. \ [/usr/share/applications\] *ENTER*
4. Wiki MarkupIn which directory do you want to install the application's icon? \
   [/usr/share/pixmaps\] *ENTER*
5. Wiki MarkupNone of the pre-built vmmon modules for VMware Server is suitable for your
   running kernel.    Do you want this program to try to build the vmmon module for
   your system (you need to have a C compiler installed on your system)? \ [yes\] *ENTER*unmigrated-wiki-markup
6. What is the location of the directory of C header files that match your running
   kernel? \ [/lib/modules/2.6.18-128.1.14.el5/build/include\] *ENTER*
7. Wiki MarkupDo you want networking for your virtual machines? (yes/no/help) \ [yes\] *ENTER*

8. Wiki Markup
   Your computer has multiple ethernet network interfaces available: eth0, eth1, virbr0. Which one do you want to bridge to vmnet0? \[eth0\] *eth1*

10. Your computer has multiple ethernet network interfaces available: eth0, eth1,
    virbr0. Which one do you want to bridge to vmnet0? [eth0] eth1
11. Do you wish to configure another bridged network? Wiki MarkupDo you wish to configure another bridged network? (yes/no) \ [no\] *ENTER*
12. Wiki MarkupDo you want to be able to use NAT networking in your virtual machines? (yes/no) \
    [yes\] *no* Wiki Markup
13. Do you want to be able to use host-only networking in your virtual machines? \
    [no\] *yes*unmigrated-wiki-markup
14. Do you want this program to probe for an unused private subnet? (yes/no/help) \
    [yes\] *no*
15. What will be the IP address of your host on the private
    network? 192.168.0.1
16. What will be the netmask of your private network? 255.255.0.0
17. DHCP information is displayed, press ENTERunmigrated-wiki-markup
18. Do you wish to configure another host-only network? (yes/no) \ [no\] *ENTER*
19. Wiki MarkupThe default port : 902 is not free. We have selected a suitable alternative
    port for VMware Server use. You may override this value now.
    Remember to use this port when connecting to this server.
    Please specify a port for remote console connections to use \ [904\] *ENTER*
20. Wiki MarkupIn which directory do you want to keep your virtual machine files? \
    [/var/lib/vmware/Virtual Machines\] *ENTER*
21. Wiki MarkupThe path "/var/lib/vmware/Virtual Machines" does not exist currently. This
    program is going to create it, including needed parent directories. Is this
    what you want? \ [yes\] *ENTER*
22. Please enter your 20-character serial number
    Type XXXXX-XXXXX-XXXXX-XXXXX or 'Enter' to cancel: enter the serial number

Verify the host-only network was configured correctly:

Configure /etc/hosts

Modify the /etc/hosts file to include entries for the VM host and guest computers:

Configure the sshd Service to Listen on the Virtual Private Network 

Configure The VM Host To Be Able To SSH To Itself

Add the VM host's public key to its own authorized_keys file to allow it to SSH to itself without a password prompt: 

Configure vcld to use vcl.key

Configure the keys column in the managementnode table in the VCL database

...

Configure The DHCP Service 

Save a copy of the original dhcpd.conf file:

ddns-update-style none; shared-network vmnet1 {
         subnet 192.168.0.0 netmask 255.255.0.0 {
                 ignore unknown-clients;
                 option routers 192.168.0.1;
                 host vmguest-1 {
                         option host-name "vmguest-1";
                         hardware ethernet 00:50:56:1a:01:01;
                         fixed-address 192.168.1.1;
                         filename "/tftpboot/pxelinux.0";
                         option dhcp-server-identifier 192.168.0.1;
                         next-server 192.168.0.1;
                 }
   }        }
}

The DHCP daemon should only listen on the virtual private network (vmnet1) to avoid conflicts with other production VCL networks.  Configure the dhcpd service startup script to only listen on the vmnet1 interface:

start() {
 [ -x $dhcpd ] || return 5
 [ -f $conf ] || return 6
 pidofproc $prog >/dev/null 2>&1
 RETVAL=$?
 [ $RETVAL -eq 0 ] && return $RETVAL
 echo -n $"Starting $prog: "
 daemon $dhcpd vmnet1 $DHCPDARGS 2>/dev/null
 RETVAL=$?
 echo
 [ $RETVAL = 0 ] && touch $lockfile
 return $RETVAL 
}

Configure the dhcpd service to automatically start at runlevels 3-5:

...