Introduction

Once you have created your project, you can start adapting it to your own needs and requirements.

Deployment directory

Currently, Syncope needs two three base directories to be defined:

• bundles - where ConnId bundles are stored (check what a connector bundle is);
• log - where all system logs are written;
• conf (optional) - where configuration files are located, if override is needed.

For example, you can create directories as follows:

$ mkdir /opt/syncope
$ mkdir /opt/syncope/bundles
$ mkdir /opt/syncope/log
$ mkdir /opt/syncope/conf

Internal storage

Internal storage is a database where all information and configurations are stored.

...

core/src/main/resources/content.xml

.

Please note that Syncope core will populate internal storage with provided content only if the corresponding database is empty, i.e. does not contain any table or view.

...

as indicated in the following.

PostgreSQL

jpa.driverClassName=org.postgresql.Driver
jpa.url=jdbc:postgresql://localhost:5432/syncope
jpa.username=syncope
jpa.password=syncope
jpa.dialect=org.hibernate.dialect.PostgreSQLDialect
dbUnitDataTypeFactory=org.dbunit.ext.postgresql.PostgresqlDataTypeFactoryapache.openjpa.jdbc.sql.PostgresDictionary
jpa.pool.validationQuery=SELECT 1
#note: other connection pool settings can also be configured here, see persistenceContext.xml
quartz.jobstore=org.quartz.impl.jdbcjobstore.PostgreSQLDelegate
quartz.sql=tables_postgres.sql
audit.sql=audit.sql
database.schema=

This assumes that you have a PostgreSQL instance running on localhost, listening on its default port 5432 with a database

...

syncope

...

fully accessible by user

...

syncope

...

with password

...

syncope

...

.

MySQL

jpa.driverClassName=com.mysql.jdbc.Driver
jpa.url=jdbc:mysql://localhost:3306/syncope?characterEncoding=UTF-8
jpa.username=syncope
jpa.password=syncope
jpa.dialect=org.hibernate.dialect.MySQL5InnoDBDialect
dbUnitDataTypeFactory=org.dbunit.ext.mysql.MySqlDataTypeFactoryapache.openjpa.jdbc.sql.MySQLDictionary
jpa.pool.validationQuery=SELECT 1
#note: other connection pool settings can also be configured here, see persistenceContext.xml
quartz.jobstore=org.quartz.impl.jdbcjobstore.StdJDBCDelegate
quartz.sql=tables_mysql_innodb.sql
audit.sql=audit_mysql_innodb.sql
database.schema= 

This assumes that you have a MySQL instance running on localhost, listening on its default port 3306 with a database

...

syncope

...

fully accessible by user

syncope

with password

syncope

syncope with password syncope.

It also assumes that the InnoDB engine is enabled in your MySQL instance - if this is not the case, then change the value for 'quartz.sql' to

quartz.sql=tables_mysql.sql

MariaDB

jpa.driverClassName=org.mariadb.jdbc.Driver
jpa.url=jdbc:mariadb://localhost:3306/syncope?characterEncoding=UTF-8
jpa.username=syncope
jpa.password=syncope
jpa.dialect=org.apache.openjpa.jdbc.sql.MariaDBDictionary
jpa.pool.validationQuery=SELECT 1
#note: other connection pool settings can also be configured here, see persistenceContext.xml
quartz.jobstore=org.quartz.impl.jdbcjobstore.StdJDBCDelegate
quartz.sql=tables_mariadb.sql
audit.sql=audit.sql
database.schema= 

This assumes that you have a MariaDB instance running on localhost, listening on its default port 3306 with a database syncope fully accessible by user syncope with password syncope.

Oracle

jpa.driverClassName=oracle.jdbc.driver.OracleDriver
jpa.url=jdbc:oracle:thin:@localhost:1521:orcl
jpa.username=syncope
jpa.password=syncope
jpa.dialect=org.hibernate.dialect.Oracle10gDialect
dbUnitDataTypeFactory=org.dbunit.ext.oracle.Oracle10DataTypeFactoryapache.openjpa.jdbc.sql.OracleDictionary
jpa.pool.validationQuery=SELECT 1 FROM DUAL
#note: other connection pool settings can also be configured here, see persistenceContext.xml
quartz.jobstore=org.quartz.impl.jdbcjobstore.oracle.OracleDelegate
quartz.sql=tables_oracle.sql
audit.sql=audit_oracle.sql
database.schema=SYNCOPE

This assumes that you have an Oracle instance running on localhost, listening on its default port 1521 with a database syncope under tablespace SYNCOPE fully accessible by user syncope with password syncope.

You will also need to

syncope

under tablespace

SYNCOPE

fully accessible by user

syncope

with password

syncope

1. create directory

   Code Block
   core/src/main/resources/META-INF

   
   

2. download Oracle mapping file for the version you are building (1_2_X, 1.1.X, 1.0.X)

3. rename it to

   Code Block
   orm.xml

   and copy it under the directory created above

Microsoft SQL Server

jpa.driverClassName=com.microsoft.sqlserver.jdbc.SQLServerDriver
jpa.url=jdbc:sqlserver://localhost:1344;database=syncope;selectMethod=cursor;sendStringParametersAsUnicode=false
jpa.username=syncope
jpa.password=syncope
jpa.dialect=org.apache.openjpa.jdbc.sql.SQLServerDictionary
jpa.pool.validationQuery=SELECT 1
#note: other connection pool settings can also be configured here, see persistenceContext.xml
quartz.jobstore=org.quartz.impl.jdbcjobstore.MSSQLDelegate
quartz.sql=tables_sqlServer.sql
audit.sql=audit_sqlserver.sql
database.schema=

This assumes that you have an SQL Server instance running on localhost, listening on its default port 1344 with a database syncope fully accessible by user syncope with password syncope.

You will also need to

1. create directory

   Code Block
   core/src/main/resources/META-INF

   
   

2. download Oracle MS SQL Server mapping file for the version you are building (1_2_X, 1.1.X, 1.0.X)

3. rename it to

   Code Block
   orm.xml

   and copy it under the directory created above

JEE container

Apache Tomcat 7

This assumes that you have got Apache Tomcat 7 installed in directory

...

$CATALINA_HOME

...

.

setenv.sh

Create

...

.

Set Environment

GNU / Linux - Mac OS X

Create $CATALINA_HOME/bin/setenv.sh

...

with content (keep everything on a single line).

JAVA_OPTS="-Djava.awt.headless=true -Dfile.encoding=UTF-8 -server \
-Xms1536m -Xmx1536m -XX:NewSize=256m -XX:MaxNewSize=256m -XX:PermSize=256m \
-XX:MaxPermSize=256m -XX:+DisableExplicitGC"

Windows

Create %CATALINA_HOME%\bin\setenv.bat with content (keep everything on a single line).

set JAVA_OPTS=-Djava.awt.headless=true -Dfile.encoding=UTF-8 -server
-Xms1536m -Xmx1536m -XX:NewSize=256m -XX:MaxNewSize=256m -XX:PermSize=256m
-XX:MaxPermSize=256m -XX:+DisableExplicitGC

context.xml

Uncomment

...

<Manager

...

pathname=""

...

/>

...

in

...

$CATALINA_HOME/conf/context.xml

...

.

Optionally, define a datasource for internal storage (following example is for MySQL): please check that the connection parameters are same configure as configured above.

Syncope, when not finding a datasource called

jdbc/syncopeDataSource

, will connect to internal storage by instantiating a new connection upon request: this is of course strongly discouraged for any production environment.

<Resource name="jdbc/syncopeDataSource" auth="Container" type="javax.sql.DataSource"
          factory="org.apache.tomcat.jdbc.pool.DataSourceFactory" testWhileIdle="true"
          testOnBorrow="true" testOnReturn="true" validationQuery="SELECT 1" validationInterval="30000"
          maxActive="50100" minIdle="2" maxWait="10000" initialSize="2" removeAbandonedTimeout="1020"
          removeAbandoned="true" logAbandoned="true" suspectTimeout="1020"
          timeBetweenEvictionRunsMillis="5000" minEvictableIdleTimeMillis="5000"                         
          jdbcInterceptors="org.apache.tomcat.jdbc.pool.interceptor.ConnectionState;org.apache.tomcat.jdbc.pool.interceptor.StatementFinalizer" 
          username="syncope" password="syncope" driverClassName="com.mysql.jdbc.Driver"
          url="jdbc:mysql://localhost:3306/syncope?characterEncoding=UTF-8"/>

Be sure to put the JDBC driver JAR file under

...

$CATALINA_HOME/lib

...

for the Datasource you have defined above.

Glassfish 4.1

Update core glassfish-web.xml

When using a datasource for internal storage, be sure to add

  <resource-ref>
    <res-ref-name>jdbc/syncopeDataSource</res-ref-name>
    <jndi-name>jdbc/syncopeDataSource</jndi-name>
  </resource-ref>

assuming that your Glassfish instance provides a datasource named jdbc/syncopeDataSource.

right after </context-root> in core/src/main/webapp/WEB-INF/glassfish-web.xml.

JBoss AS 7.1

Download this file, copy it under core/src/main/resources/ and replace

<entry key="openjpa.MetaDataFactory" value="org.apache.syncope.core.persistence.openjpa.JBossPersistenceMappingFactory(URLs=vfs:${project.build.directory}/cargo/configurations/jboss71x/deployments/${project.build.finalName}.war/WEB-INF/classes/, Resources=META-INF/orm.xml)"/>

<entry key="openjpa.MetaDataFactory" value="org.apache.syncope.core.persistence.openjpa.JBossPersistenceMappingFactory(URLs=vfs:/content/${project.build.finalName}.war/WEB-INF/classes/, Resources=META-INF/orm.xml)"/>

Download this file, copy it under core/src/main/resources/ and replace

<entry key="openjpa.MetaDataFactory" value="jpa(URLs=vfs:${project.build.directory}/cargo/configurations/jboss71x/deployments/${project.

...

Other setup tasks

Uncomment element

<resource-ref ... />

in

...

build.finalName}.war/WEB-INF/classes/, Resources=META-INF/orm.xml)"/>

with

<entry key="openjpa.MetaDataFactory" value="jpa(URLs=vfs:/content/${project.build.finalName}.war/WEB-INF/classes/, Resources=META-INF/orm.xml)"/>

Fixing error messages at core startup 

When core application starts up you will see many yet harmless error messages and stacktraces: this is due to an internal mechanism that looks for custom implementations of standard Apache Syncope interfaces.

If you want to remove such messages you can provide an override of the org.apache.syncope.core.init.ImplementationClassNamesLoader class: see an example here.

Use DataSource

When using a DataSource, a few additional adjustments are needed.

core web.xml

Change

  <resource-ref>
    <res-ref-name>jdbc/syncopeDataSource</res-ref-name>
    <res-type>javax.sql.DataSource</res-type>
    <res-auth>Container</res-auth>
  </resource-ref>

to

  <resource-ref>
    <res-ref-name>jdbc/syncopeDataSource</res-ref-name>
    <res-type>javax.sql.DataSource</res-type>
    <res-auth>Container</res-auth>
    <lookup-name>java:/syncopeDataSource</lookup-name>
  </resource-ref>

assuming that you have defined a DataSource with JNDI name 'java:/syncopeDataSource' in JBoss configuration.

core jboss-deployment-structure

Add

<module name="com.mysql"/>

right before

</dependencies>

assuming that 'com.mysql' is the name of the JBoss module you have deployed for your JDBC Driver (MySQL in this case).

Oracle WebLogic 12

Update core web.xml

Change

classpath*:/*Context.xml

to

/WEB-INF/classes/*Context.xml

at the beginning of core/src/main/webapp/WEB-INF/web.xml.

, if you have defined a datasource.

Modify

...

Update core weblogic.xml

When using a datasource for internal storage, be sure to add

  <resource-description>
    <jndi-name>syncopeDataSource</jndi-name>
    <res-ref-name>jdbc/syncopeDataSource</res-ref-name>
  </resource-description>

assuming that your WebLogic instance provides a datasource named syncopeDataSource.

before </weblogic-web-app> in core/src/main/webapp/WEB-INF/weblogic.xml.

Other setup tasks

Use datasource

Syncope, when not finding a datasource called jdbc/syncopeDataSource, will connect to internal storage by instantiating a new connection upon request: this is of course strongly discouraged for any production environment.

When using a container-managed datasource, be sure to uncomment the <resource-ref ... /> element in core/src/main/webapp/WEB-INF/web.xml.

Connect console to core

Modify console/src/main/resources/

...

console.properties

...

so that

baseURL

provided properties reflects the scheme, hostname and port number where your JEE container is running and the URL context where Syncope core will be deployed.

For example, when running Apache Tomcat 7 and having

1.0-SNAPSHOT

as project version (as created by Maven archetype)your JEE container on port 9080, you should set have

baseURL

...

scheme=http
host=localhost
port=8080
rootPath=/syncope/rest/

Build and deploy

Assuming that you have created the two deployment directories defined above, just run

Syncope >= 1.2.0

mvn clean package -Dconf.directory=/opt/syncope/conf -Dbundles.directory=/opt/syncope/bundles -Dlog.directory=/opt/syncope/log

At this point you can deploy

...

core/target/syncope

...

.war

...

and

...

console/target/syncope-console

...

.war

...

(where $PROJECT-VERSION is project version as created by Maven archetype) to your JEE container.

Test your

...

installation

1. Point your favorite browser to administration console at Code Blockhttp://localhost:8080/syncope-console-$PROJECT-VERSION// (assuming that your JEE container is running on localhost, port 8080)
2. Login as 'admin' / 'password'