Tuscany Samples
The Tuscany Samples samples are shipped with Tuscany binary and source releases. If you are using tuscany from a release distribution then To make sure that you are 're looking at the documentation that corresponds to the samples as they stood at the time of the release.
2.0-beta samples documentation
If however you are working with a snapshot distribution, or using samples code from the trunk of our source repository, then you've come to the right place, as the documentation here reflects the current status of the samples in the trunk of our source tree.
In a distribution, the samples source code is found in the samples directory, directly under the root directory. The following sections are laid out to match the structure of the samples directory and its subdirectories.
If you're new to Tuscany SCA start with the getting-started. Samples are generally presented in the form on an SCA contribution (look for directories ending in "-contribution") or as a webapp (look for directories ending in "-webapp"). The directories getting-started, learning-more and applications all contain sample SCA contributions of increasing complexity. The running-tuscany directory describes the various ways you can start the Tuscany runtime and install contributions. For each sample contribution described in this document we do suggest an example way to install it and start the composites it contains however the other approaches in running-tuscany should also work for most sample contributions. The extending-tuscany directory contains some examples of how to build new binding and implementation extensions for using in Tuscany.
In the following text we us <some_text> to mean you have to replace it with whatever is appropriate in your environment. For example <tuscany_bin_distro> means the directory in which you install the Tuscany binary distribution.
Instructions are colour coded as follows:
Panel |
---|
|
Instructions in pink boxes are for the Ant user |
Panel |
---|
|
Instructions in silver boxes are for the Maven user |
getting-started
SCA defines a concept called a Contribution which is the way that SCA composite applications are packed for deployment. See sca introduction for more information on SCA concepts.
The getting-started samples consist of simple SCA contributions that you can build and run as your first step to getting up and running with the Tuscany SCA Java runtime.
You can build the sample contributions with either Maven or Ant and the running-tuscany directory contains information about the various ways you can start Tuscany and run these contributions.
helloworld-contribution
This is the simplest contribution. This contribution describes a composite application with a single component implemented in Java. The component's Java implementation provides service "business logic" for saying hello to a person whose name is supplied as input to the service.
Panel |
---|
|
To build this contribution using Ant do the following: TODO |
Panel |
---|
|
To build this contribution using Maven do the following: Code Block |
---|
cd helloworld-contribution
mvn
|
This will produce the contribution as follows: Code Block |
---|
helloworld-contribution/target/helloworld-contribution.jar
|
You can run the contribution using Maven by doing the following: Code Block |
---|
cd helloworld-contribution
mvn tuscany:run
|
|
Note |
---|
|
And then what? ![(warning)](/confluence/s/34gb19/8804/10mvnxf/_/images/icons/emoticons/warning.svg) |
Note |
---|
|
need description of structure and operation this application once we've decided what that should be |
For more information on getting started with the Apache Tuscany SCA Java runtime see the getting started page.
helloworld-webapp
This sample is not a contribution in it's own right but demonstrates how to run the helloworld-contribution inside a web application.
Panel |
---|
|
To build this contribution using Maven do the following: Code Block |
---|
cd helloworld-webapp
mvn
|
This will produce a webapp as follows: Code Block |
---|
helloworld-webapp/target/helloworld.war
|
|
You can run this webapp by deploying it to you're favourite webapp container. For example, you can deploy to Tomcat and run as follows:
Code Block |
---|
cp helloworld-webapp/target/helloworld.war my_tomcat_install/webapps
my_tomcat_install/bin/catalina run
|
Note |
---|
|
This sample webapp doesn't provide any web pages so how to make it do something? |
Note |
---|
|
need description of structure and operation this application once we've decided what that should be |
Note |
---|
|
For more information on creating webapps to run SCA contributions with Tuscany see - ? |
callback-api
Note |
---|
|
This feels like a learning-more sample. I wouldn't focus on callbacks with the first time user |
sca-scopes
Note |
---|
|
This feels like a learning-more sample. I wouldn't focus on scopes with the first time user |
sca-include-contribution
Note |
---|
|
This feels like a learning-more sample. I wouldn't focus on inclusion with the first time user |
running-tuscany
Running something in Tuscany requires one or more contributions, and a method of launching the contributions to make the services they provide available. The sections below describes various means of launching contributions with the Tuscany SCA Java runtime. It's not important that you try all of these but they show you what's possible and hopefully show you how to use Tuscany in an environment that makes sense to you.
Some of the running-tuscany sub-directories just contain a README that gives you instructions. For example, maven just tells you how to configure and run contributions using the maven-tuscany-plugin. Others contain code. For example, embedded-jse contains simple Java launchers that show you how to start some of the sample contributions from a Java program.
The sample contributions in getting-started and learning-more should work regardless of which approach you adopt. However some approaches, like embedded-jse, don't have launchers for every single sample contribution.
command-line
You can execute a sample contribution from the command line on Windows or Linux.
Note |
---|
|
Waiting for tuscany.bat to be reworked before correcting |
To execute a sample contribution from the command line
on Windows, from a command prompt in the samples directory, run the command ...
Code Block |
---|
<tuscany_din_distro>\bin\tuscany.bat "contribution-name"
|
for example
Code Block |
---|
cd <tuscany_din_distro>\samples\learning-more\binding-sca\calculator-contribution
<tuscany_din_distro>\bin\tuscany.bat sample-binding-sca-calculator-contribution.jar
|
or on *nix platforms, from a shell prompt in the samples directory, run the command ...
Code Block |
---|
cd <tuscany_din_distro>/samples/learning-more/binding-sca/calculator-contribution
<tuscany_din_distro>/bin/tuscany.sh sample-binding-sca-calculator-contribution.jar
|
eclipse
To import sample contributions into Eclipse you first need to import the Tuscany runtime. You then need to import the sample contribution into Eclipse as a project. Instructions for doing both of these things can be found here
http://tuscany.apache.org/import-existing-tuscany-sca-projects-into-eclipse.html
Note. these instructions refer to our 1.x code base but it holds true for our 2.x code base.
Once you have a contribution imported into Eclipse and cleanly compiling against the Tuscany runtime jars you probably want to be able to run and debug it. The easiest way to do this is with a simple Java launcher. If you import the running-tuscany/embedded-jse project into Eclipse you'll see a number of such launcher programs which you can copy to launch the contribution(s) of your choice. Alternatively you can add a JUnit test case to the contribution that starts Tuscany and launches the contribution. See maven-junit as an example of how to do this.
embedded-jse
This directory contains sample java launchers for the some of the Tuscany sample contributions from the learning-more directory. It shows you how to embed the Tuscany runtime in a Java program. To make you're own launchers simply copy and existing one and change the details of the contribution being loaded. You'll note that the same launcher code is used inside the contribution unit test demonstrated by maven-junit.
Panel |
---|
|
To use the sample JSE launchers with ant execute the command Code Block |
---|
ant <contributionname>
|
where <contributionname> is one of the targets in the provided build.xml file |
Panel |
---|
|
To use the sample JSE launchers from Maven do the following: Code Block |
---|
cd embedded-jse
mvn
|
This runs a JUnit test case that runs all the launchers in turn. |
embedded-osgi
The Tuscany runtime jars will also work within an OSGi enviroment. If you want to load them into a vanilla OSGi environment see the osgi directory. If you want Tuscany to create an OSGi environment for you this directory contains launchers that do just that.
Panel |
---|
|
To use the sample OSGI launchers with ant do the following: Code Block |
---|
cd embedded-osgi
ant <contributionname>
|
where <contributionname> is one of the targets in the build.xml file |
Panel |
---|
|
To use the sample JSE launchers from Maven do the following: Code Block |
---|
cd embedded-osgi
mvn
|
This runs a JUnit test case that runs all the launchers in turn. |
maven
Maven can be used to install contributions. Tuscany has a special plugin (maven-tuscany-plugin) that makes this happen. Look for contributions that have the following configuration in their pom.xml file:
Code Block |
---|
<plugin>
<groupId>org.apache.tuscany.maven.plugins</groupId>
<artifactId>maven-tuscany-plugin</artifactId>
<version>2.0-SNAPSHOT</version>
</plugin>
|
For contributions that have this, for example, learning-more/binding-sca/contribution-calculator, do the following
cd samples/learning-more/binding-sca/contribution-calculator
mvn tuscany:run
This will install the contribution in the Tuscany runtime, start the composite it contains, and then wait. At this point you can use
other clients to send messages to services that the running SCA applcation exposes, for example, try learning-more/sca-client/calculator-scaclient.
maven-junit
Maven will run JUnit tests found in a module's src/test/java directory automatically. If you use embedded-jse style code in the JUnit test to install a contribution and start any composites it contains they you can unit test your contributions. This directory contains a contribution and a unit test which installs the contribution using very similar code to that found in embedded-jse.
To run the contributions unit test do the following:
Code Block |
---|
cd maven-junit/calculator-contribution
mvn
|
maven-junit-osgi
You can use a special Tuscany Maven plugin (maven-osgi-junit-plugin) to unit test contributions in a JUnit environment. This relies on adding some configuration to the Maven pom.xml. For example, if you look in maven-junit-osgi/calculator-osgi you'll see:
Code Block |
---|
<plugin>
<groupId>org.apache.tuscany.maven.plugins</groupId>
<artifactId>maven-osgi-junit-plugin</artifactId>
<version>1.0</version>
<dependencies>
<dependency>
<groupId>org.apache.tuscany.sca</groupId>
<artifactId>tuscany-node-launcher-equinox</artifactId>
<version>${pom.version}</version>
</dependency>
</dependencies>
<executions>
<execution>
<id>osgi-test</id>
<phase>test</phase>
<goals>
<goal>test</goal>
</goals>
<configuration>
<systemProperties>
<property>
<name>osgi.configuration.area</name>
<value>${project.build.directory}/equinox</value>
</property>
</systemProperties>
</configuration>
</execution>
</executions>
</plugin>
|
This configures the maven-osgi-junit-plugin to use the tuscany-node-launcher-equinox to install the contribution represented by the calculator-osgi directory. As an alternative to this configuration you could use the contents of tuscany-node-launcher-equinox directly in your JUnit test to launch the Tuscany runtime using OSGi.
To run the contributions unit test do the following:
Code Block |
---|
cd maven-junit/calculator-contribution
mvn
|
osgi
The Tuscany runtime can be run in a vanilla OSGi container such as Equinox. To do this you have to:
- launch the OSGi container itself
- load the Tuscany runtime bundles (all our jars are bundles) into the container
- install a contribution packaged as an OSGi bundle
For example, to install a contribution in Equinox do the following
On Windows, run
Code Block |
---|
java -jar ..\..\..\modules\osgi-3.5.0-v20090520.jar -configuration ..\..\..\features\configuration -clean -console
|
On *Unix, run
Code Block |
---|
java -jar ../../../modules/osgi-3.5.0-v20090520.jar -configuration ../../../features/configuration -clean -console
|
You should see the osgi console:
Code Block |
---|
osgi>
osgi> Jun 22, 2009 1:32:27 PM org.apache.tuscany.sca.extensibility.equinox.EquinoxServiceDiscoveryActivator start
INFO: Equinox-based service discoverer is now configured.
|
You can run "ss" command under the osgi> to see the status of the bundles.
Then you can install and start contributions as bundles by doing the following:
Code Block |
---|
osgi> install file:./path/to/<contribution_bundle.jar>
|
Note that <contribution_bundle.jar> will need an activator in order to register the bundle as a SCA contribution
Running on Felix
See http://tuscany.apache.org/documentation-2x/running-tuscany-sca-2x-with-equinox-and-felix.html
shell
This directory contains a sample shell program supporting simple commands to start and stop SCA composites.
Note |
---|
|
We currently have two similar approaches available (see command-line). We need to merge the two together. |
To build the sample shell do this:
To run it:
at the prompt:
Code Block |
---|
start myNode ../../applications/store/target/sample-store.jar
|
or:
Code Block |
---|
start myNode http://people.apache.org/~jsdelfino/tuscany/java/test/sample-store.jar
|
also try:
Code Block |
---|
status
stop myNode
bye
|
Starting and stopping composites is pretty fast. To see that, try the following
two scripts, which start/stop the sample store composite 10 times.
Code Block |
---|
./sca <scripts/test.txt
|
or
Code Block |
---|
./sca <scripts/test-remote.txt
|
The shell can also run as a Webapp. To try it install target/scashell.war in
a Web container, point your Web browser to http://localhost:8080/scashell
and try the links on that page.
webapp
Tuscany can be embedded inside a webapp alongside one or more SCA contributions. To execute sample webapp based contributions (contributions that have webapp at the end of their name) you can build the contribution using maven and then copy the resulting war file to your container of choice
For example, for binding-jsonrpc/contribution-calculator-webapp, do the following:
Code Block |
---|
cd samples/binding-jsonrpc/contribution-calculator-webapp
mvn
cp target/sample-contribution-binding-jsonrpc-calculator-webapp.war <your_container_deployment-dir>
|
As an alternative, sample webapp based contributions can be run within Jetty directly from Maven, look for webapp contributions that have the following configuration in their pom.xml file:
Code Block |
---|
<plugin>
<groupId>org.mortbay.jetty</groupId>
<artifactId>maven-jetty-plugin</artifactId>
<version>6.1.18</version>
</plugin>
|
For contributions that have this, for example, binding-jsonrpc/contribution-calculator-webapp, do the following
Code Block |
---|
cd samples/binding-sca/contribution-calculator
mvn jetty:run
|
This will launch the contribution in the Jetty runtime and then wait. At this point you can use HTTP clients to send messages to services that the running SCA applcation exposes. For this example try pointing your browser at:
Code Block |
---|
http://localhost:8080/sample-binding-jsonrpc-calculator-webapp/
|
learning-more
The samples found in the contributions below illustrate more of SCA and Tuscany's features in action. The contributions here are primarily focused on demonstrating the various SCA extensions that the Tuscany runtime supports, for example, bindings and implementations. The directories are named to let you easily find a sample of the extension you're interested in.
You can identify contributions here as the name of the directory from which they are built ends with "-contribution". There are also webapp samples here. The names of these directories end with "-webapp".
Refer to the information above in the "running-tuscany" section to find the various options for installing these sample contributions. We present an single default approach for each sample as an example.
async
This sample demonstrates the SCA asynchronous progamming model in action as typified by services that are configured with the asyncInvocation intent. For example, from calculator-contribution
Code Block |
---|
@Remotable
@AsyncInvocation
public interface CalculatorServiceAsync {
void calculateAsync(Integer n1, ResponseDispatch<String> response);
}
|
A client component can access an asynchronous service either synchronously or asynchronously. Asynchronous reference interfaces also have a special form, again from calculator-contribution:
Code Block |
---|
@Remotable
public interface CalculateReferenceAsync {
// Sync
public String calculate(Integer i1);
// Aysnc Poll
public Response<String> calculateAsync(Integer i1);
// Async Callback
public Future<String> calculateAsync(Integer i1, AsyncHandler<String> handler);
}
|
calculator-contribution
This contribution defines synchronous and asynchronous component services and a client component which references both. During the test the client component exercise all three styles of reference interface operation against both the synchronous and asynchronous service.
Panel |
---|
|
The contribution can be built using Ant as follows: Code Block |
---|
cd learning-more/async/calculator-contribution
ant
|
The contribution can be installed and the composite it contains run using Ant as follows Code Block |
---|
cd running-tuscany/embedded-jse
ant sample-implementation-java-calculator-async-contribution
|
|
Panel |
---|
|
The contribution can be built using Maven as follows: Code Block |
---|
cd learning-more/async/calculator-contribution
mvn
|
The contribution can be installed and the composite it contains run using Maven as follows Code Block |
---|
cd running-tuscany/embedded-jse
mvn
|
This will run several contributions including the sample-implementation-java-calculator-async-contribution. |
binding-comet
The Comet protocol allows a servlet to process IO asynchronously, receiving events when data is available for reading on the connection (rather than always using a blocking read), and writing data back on connections asynchronously (most likely responding to some event raised from some other source).
weather-webapp
Executing the command "mvn" in this sample project creates a web archive suitable for deployment to Tomcat. It makes use of the tuscany comet binding.
Panel |
---|
|
The webapp can be built using Maven as follows: Code Block |
---|
cd learning-more/binding-commet/weather-webapp
mvn
|
|
The webapp can be installed and run as follows:
Code Block |
---|
cd learning-more/binding-commet/weather-webapp
cp target/sample-binding-comet-1.0.war <your_container_deployment-dir>
start the container as appropriate
|
binding-jms
This binding supports message orient communication via the JMS API.
helloworld-webapp
This contribution packages an SCA application inside a webapp. The application has two components which exchange helloworld style messages over the JMS binding.
Panel |
---|
|
The webapp can be built using Maven as follows: Code Block |
---|
cd learning-more/binding-jms/helloworld-webapp
mvn
|
|
The webapp can be installed and run as follows:
Code Block |
---|
cd learning-more/binding-jms/helloworld-webapp
cp target/helloworld-jms.war <your_container_deployment-dir>
start the container as appropriate
|
Warning |
---|
|
By rights the webapp should be called sample-binding-jms-helloworld-webapp.war |
Once the webapp is deployed point your browser at:
Code Block |
---|
http://localhost:8080/helloworld-jms/
|
binding-jsonrpc
This binding supports communication over the JSON-RPC protocol.
calculator-contribution
This sample demonstrates using the simple calculator service component which makes use of four other services for add, subtract, multiply and divide functions. In this variant of the calculator sample the AddService is configured to be invoked using the JSON-RPC protocol. You can see the configuration by looking in the src/main/resources/Calculator.composite xml file.
Panel |
---|
|
The contribution Jar can be built using Ant as follows: Code Block |
---|
cd learning-more/binding-jsonrpc/calculator-contribution
ant
|
The contribution can be installed and the composite it contains run using Ant as follows: Code Block |
---|
cd running-tuscany/embedded-jse
ant sample-implementation-java-calculator-async-contribution
|
|
Panel |
---|
|
The contribution Jar can be built using Maven as follows: Code Block |
---|
cd learning-more/binding-jsonrpc/calculator-contribution
mvn
|
The contribution can be installed and the composite it contains run using Maven as follows Code Block |
---|
cd running-tuscany/embedded-jse
mvn
|
This will run several contributions including the sample-implementation-java-calculator-async-contribution. |
calculator-webapp
This contribution packages the same calculator-contribution inside a webapp.
Panel |
---|
|
The webapp can be built using Maven as follows: Code Block |
---|
cd learning-more/binding-jsonrpc/calculator-webapp
mvn
|
|
The webapp can be installed and run as follows:
Code Block |
---|
cd learning-more/binding-jsonrpc/calculator-webapp
cp target/sample-binding-jsonrpc-calculator-webapp.war <your_container_deployment-dir>
start the container as appropriate
|
Once the webapp is deployed point your browser at:
Code Block |
---|
http://localhost:8080/sample-binding-jsonrpc-calculator-webapp/
|
binding-rmi
In this example the calculator function is split over two contributions in order to demonstrate the remote method invocation binding (binding.rmi). The calculator-service-contribution contains a composite which defines a CalculatorServiceComponent which exposes a CalculatorService using binding.rmi. The calculator-reference-contribution contains a composite which also defines a CalculatorServiceComponent but which in this case calls the add, subtract, multiple and divide operations offered by the component in the calculator-service-contribution. The two contributions are run using separate Tuscany nodes and the resulting components communicate over RMI. Both contributions must be deployed and started for the sample to work;
Panel |
---|
|
The contributions can be installed and the composite they contain run using Ant as follows: Code Block |
---|
cd running-tuscany/embedded-jse
ant sample-binding-rmi-calculator-contribution
|
|
Panel |
---|
|
The contributions can be installed and the composite they contain run using Ant as follows: Code Block |
---|
cd running-tuscany/embedded-jse
mvn
|
This will run several contributions including the binding-rmi sample contributions |
calculator-service-contribution
This contribution defines a CalculatorServiceComponent whose add, subtract, multiply and divide operations are available over RMI.
Panel |
---|
|
The contribution Jar can be built using Ant as follows: Code Block |
---|
cd learning-more/binding-rmi/calculator-service-contribution
ant
|
|
Panel |
---|
|
The contribution Jar can be built using Maven as follows: Code Block |
---|
cd learning-more/binding-rmi/calculator-service-contribution
mvn
|
|
calculator-reference-contribution
This contribution defines a CalculatorServiceComponent which accesses the service version of the component using binding.rmi.
Panel |
---|
|
The contribution Jar can be built using Ant as follows: Code Block |
---|
cd learning-more/binding-rmi/calculator-reference-contribution
ant
|
|
Panel |
---|
|
The contribution Jar can be built using Maven as follows: Code Block |
---|
cd learning-more/binding-rmi/calculator-reference-contribution
mvn
|
|
binding-sca
This sample is the simplest sample other than that shown in the getting starting section. It uses the default SCA protocol for communicating between the various components of the caluclator application.
calculator-contribution
The service and reference definitions in the Calculator.composite and CalculatorClient.composite files have no binding attributes, thereby defaulting to the SCA binding for communication between the running instances of the components.
Panel |
---|
|
The contribution Jar can be built using Ant as follows: Code Block |
---|
cd learning-more/binding-sca/calculator-contribution
ant
|
The contribution can be installed and the composite it contains run using Ant as follows: Code Block |
---|
cd running-tuscany/embedded-jse
ant sample-binding-sca-calculator-contribution
|
|
Panel |
---|
|
The contribution Jar can be built using Maven as follows: Code Block |
---|
cd learning-more/binding-sca/calculator-contribution
mvn
|
The contribution can be installed and the composite it contains run using Maven as follows Code Block |
---|
cd running-tuscany/embedded-jse
mvn
|
This will run several contributions including the sample-binding-sca-calculator-contribution. |
binding-ws
The web service binding allows components to expose and call services using SOAP formatted messages primarily over HTTP.
calculator-contribution
This contribution provides the four arithmetic operations in the calculator service, with the AddService being accessible as a web service via the URL http://localhost:8085/AddServiceComponent
Image Removed, as configured in the Calculator.composite file.
Panel |
---|
|
The contribution Jar can be built using Ant as follows: Code Block |
---|
cd learning-more/binding-ws/calculator-contribution
ant
|
The contribution can be installed and the composite it contains run using Ant as follows: Code Block |
---|
cd running-tuscany/embedded-jse
ant sample-binding-ws-calculator-contribution
|
|
Panel |
---|
|
The contribution Jar can be built using Maven as follows: Code Block |
---|
cd learning-more/binding-ws/calculator-contribution
mvn
|
The contribution can be installed and the composite it contains run using Maven as follows Code Block |
---|
cd running-tuscany/embedded-jse
mvn
|
This will run several contributions including the sample-binding-sca-calculator-contribution. |
contribution-helloworld-ws-sdo
This sample demonstrates an SCA reference that uses a web service binding which works with SDO. Instead if using JAXB style Java beans in the service interface they are replaced with SDO object.
Note |
---|
|
Sample not currently enabled - awaiting SDO support |
distributed-osgi
These samples demonstrate the execution of Tuscany contributions in a OSGI environment. In particular the two bundle project in this directory define calculator objects that communicate with one another using the mechanisms defined in the OSGi remote services specifications. Here the Tuscany SCA runtime provides dynamic service discovery functionality. The calculator objects are registered as services directly with the OSGi bundle context by the bundle activator. Under the covers SCA provides the remote service disovery features that allow OSGi registered service to discover and communicate with one another across two JVMs.
To run the sample each bundle must be build using maven and then loaded into a separate OSGi environment into which the Tuscany SCA runtime has already been installed (See "osgi" under running-tuscany)
dosgi-dynamic-calculator-operations
This bundle provides the calculator add, subtract, multiple, divide operations services.
Panel |
---|
|
The bundle Jar can be built using Maven as follows: Code Block |
---|
cd learning-more/distributed-osgi/dosgi-dynamic-calculator-operations
mvn
|
|
Note |
---|
|
projects should be called dosgi-dynamic-calculator-operations-bundle |
To run the bundle see "osgi" under running-tuscany. In short do the following:
On Windows, run
Code Block |
---|
java -jar ..\..\..\..\modules\osgi-3.5.0-v20090520.jar -configuration ..\..\..\..\features\configuration -clean -console
|
You should see the osgi console. You can run "ss" command under the osgi> to see the status of the bundles.
Then you can install and start the bundle that's just been built:
Code Block |
---|
osgi> install file:./target/sample-dosgi-dynamic-calculator-operations.jar
|
dosgi-dynamic-calculator
Panel |
---|
|
The bundle Jar can be built using Maven as follows: Code Block |
---|
cd learning-more/distributed-osgi/dosgi-dynamic-calculator
mvn
|
|
Note |
---|
|
projects should be called dosgi-dynamic-calculator-bundle |
To run the bundle see "osgi" under running-tuscany. In short do the following:
On Windows, run
Code Block |
---|
java -jar ..\..\..\..\modules\osgi-3.5.0-v20090520.jar -configuration ..\..\..\..\features\configuration -clean -console
|
You should see the osgi console. You can run "ss" command under the osgi> to see the status of the bundles.
Then you can install and start the bundle that's just been built:
Code Block |
---|
osgi> install file:./target/sample-dosgi-dynamic-calculator.jar
|
You should see the calculator service start.
implementation-bpel
BPEL component implementations will be useful to those who wish to describe a sequence of calls that must be made to other component services.
contribution-helloworld-bpel
Panel |
---|
|
The contribution Jar can be built using Ant as follows: Code Block |
---|
cd learning-more/implementation-bpel/helloworld-bpel-contribution
ant
|
The contribution can be installed and the composite it contains run using Ant as follows: |
Panel |
---|
|
The contribution Jar can be built using Maven as follows: Code Block |
---|
cd learning-more/implementation-bpel/helloworld-bpel-contribution
mvn
|
The contribution can be installed and the composite it contains run using Maven as follows |
helloworld-bpel-webapp
implementation-composite
Note |
---|
|
Understand and Document |
helloworld-recursive
Note |
---|
|
Understand and Document |
helloworld-recursive-ws
Note |
---|
|
Understand and Document |
implementation-java
Note |
---|
|
Understand and Document |
contribution-calculator
Note |
---|
|
Understand and Document |
implementation.osgi
dosgi-calculator
dosgi-calculator-operations
Note |
---|
|
Understand and Document |
implementation-script
Note |
---|
|
Understand and Document |
contribution-calculator
Note |
---|
|
Understand and Document |
implementation-spring
Note |
---|
|
Understand and Document |
contribution-helloworld-spring
Note |
---|
|
Understand and Document |
helloworld-spring-webapp
implementation-webapp
helloworld-jaxrs-webapp
helloworld-jms-webapp
helloworld-js-client-webapp
helloworld-jsf-webapp
helloworld-jsp-webapp
helloworld-servlet-webapp
helloworld-stripes-webapp
logging-scribe
Note |
---|
|
Understand and Document |
maven-osgi-junit
Note |
---|
|
Understand and Document |
calculator-osgi
Note |
---|
|
Understand and Document |
calculator-rest-osgi
Note |
---|
|
Understand and Document |
sca-client
Note |
---|
|
Understand and Document |
calculator-scaclient
Note |
---|
|
Understand and Document |
helloworld-scaclient
Note |
---|
|
Understand and Document |
extending-tuscany
binding-extension
Note |
---|
|
Understand and Document |
implementation-extension
Note |
---|
|
Understand and Document |
applications
Note |
---|
|
Understand and Document |
store
Note |
---|
|
Understand and Document |
store-webapp
...
...
matches the distribution you have downloaded select the appropriate link below:
2.0-Beta1 samples documentation