To set up PostgreSQL and MADlib with Anaconda Python on OSX, follow the super quick start. Otherwise, follow the regular guides for installing from binaries or compiling from source.

For developers, you may want to use the Docker image described in the Developer Guide.

Sometimes there are release specific variations of the installation procedures. These exceptions are listed at the bottom of this page in the section called Installation Guide#Release Specific Installations.

MADlib works with Python 2.6 and 2.7. Currently, Python 3.x is not supported.

Currently supported database version: Postgres 9 and 10, Greenplum 4.3 and 5.X.

Super Quick Start

To set up PostgreSQL + MADlib with Anaconda Python on OSX:

PYTHON=/Users/janedoe/anaconda/bin/python 
brew install postgresql --with-python
brew services start postgresql
— — Set up database and roles
— — Install the .dmg of latest madlib downloaded from MADlib website http://madlib.incubator.apache.org/download.html
/usr/local/madlib/bin/madpack -s madlib -p postgres install

Quick Start With Binaries

Prerequisites

Install and configure your database of choice. MADlib currently supports the following platforms:

PostgreSQL
Greenplum database

MADlib requires the GNU M4 Unix macro processor which must be present for installation to succeed.

If the environment variables listed below are defined, it can save you some typing.

Postgres platform notes:

Ensure that you install Postgres with the Python extension specified (i.e., --with-python), as described here in the PostgreSQL documentation. If not you will see an error message like the one below when you try to install MADlib with madpack:

/usr/local/madlib/bin/madpack -s madlib -p postgres install
madpack.py : INFO : Detected PostgreSQL version 9.5.
madpack.py : INFO : *** Installing MADlib ***
madpack.py : INFO : MADlib tools version = 1.9.1 (//usr/local/madlib/Versions/1.9.1/bin/../madpack/madpack.py)
madpack.py : INFO : MADlib database version = None (host=localhost:5432, db=postgres, schema=madlib)
madpack.py : INFO : Testing PL/Python environment...
madpack.py : INFO : > Creating language PL/Python...
madpack.py : ERROR : SQL command failed:
SQL: CREATE LANGUAGE plpythonu;
ERROR: could not access file "$libdir/plpython2": No such file or directory
madpack.py : ERROR : Cannot create language plpythonu. Please check if you
                have configured and installed portid (your platform) with
                `--with-python` option. Stopping installation...
madpack.py : ERROR : MADlib installation failed

Installing MADlib

Download the MADlib binary
- For Postgres: OS X and Linux binaries can be found on the MADlib download page
- For Greenplum: Linux .gppkg binaries can be found on Pivotal Network in the "Greenplum Advanced Analytics Group"
  - NOTE: the above .gppkg binaries work for both open and closed source Greenplum and can be downloaded by anybody (after creating a Pivotal Network account)
Install the package.
1. Postgres:
  - on OSX double click the installer package
  - on Redhat / CentOS run the following as root:
    yum install <madlib_package> --nogpgcheck
    or
    rpm -i <madlib_package>
2. Greenplum:
  - on Redhat / CentOS run the following as gpadmin:
    gppkg -i <madlib_package>
3. NOTE: if you are using an rpm package on a CentOS 5 system, please add --no-deps flag to the command.
Ensure that the environment is setup for your database deployment and that the database is up and running.
- Ensure that psql, postgres, and pg_config are in your path
```
which psql postgres pg_config
```
- Ensure that the database is started and running
```
psql -c 'select version()'
```
  The above may need user/port/password setting depending on how the database has been configured.
Run the MADlib deployment utility to install MADlib into each database that you want to use it:
- Postgres:
```
/usr/local/madlib/bin/madpack -s madlib –p postgres install
```
  if environment variables are defined. Otherwise use a fully defined connection string:
```
/usr/local/madlib/bin/madpack -s madlib -p postgres -c [user[/password]@][host][:port][/database] install
```
- Greenplum Database:
```
/usr/local/madlib/bin/madpack –p greenplum install
```
  The above may need user/port/password setting depending on how the database has been configured.
  Run the MADlib madpack deployment utility to install MADlib into each database that you want to use it in:
After installation gpadmin should grant all privileges on schema madlib to users who will be accessing MADlib functions. Otherwise, users will get "ERROR: permission denied for schema MADlib." Also, install checks (see next step below) will fail if CREATE TEMP TABLE privileges are not granted on the schema where MADlib is installed. See the PostgreSQL docs for information on schemas and privileges.
Test your installation

- Postgres:
```
/usr/local/madlib/bin/madpack -s madlib –p postgres install-check
```
- Greenplum Database:
```
/usr/local/madlib/bin/madpack –p greenplum install-check
```
  The above may need user/port/password setting depending on how the database has been configured.
  
  Please note that if the optimizer_control GUC is set to off in Greenplum, the following install checks will fail, and these MADlib functions will not work: decision tree, random forest, LDA , k-Means, PMML export for decision tree, PMML export for random forest. This will be fixed in a future release (MADLIB-1109). The parameter optimizer_control controls whether the server configuration parameter optimizer can be changed. The parameter optimizer controls whether the GPORCA optimizer is enabled when running SQL queries.

Installing from PGXN (PostgreSQL)

Prerequisites

Requirements for installing MADlib:

gcc and g++ (For OSX, Clang will work for compiling the source, but not for documentation.)
m4
patch
cmake
pgxn installed
PostgreSQL (64-bit) 9.2+ with plpython support enabled. Note: plpython may not be enabled in Postgres by default.

Use below command to install and load the latest MADlib package uploaded on PGXN.

pgxn install madlib
pgxn load madlib

If you see the following error, it's likely that you are using Parallel Execution flags for make.

[ 86%] Performing build step for 'EP_boost'
Ignored: make
[ 86%] Performing install step for 'EP_boost'
Ignored: make
[ 86%] Completed 'EP_boost'
[ 86%] Built target EP_boost
make[1]: *** [all] Error 2
make: *** [all] Error 2
ERROR: command returned 2: make PG_CONFIG=/usr/local/pg10/bin/pg_config all

You can run this as a workaround:

MAKEFLAGS='-j1' pgxn install madlib
pgxn load madlib

Compiling From Source

Prerequisites

Requirements for installing MADlib:

gcc and g++
- For OS X, Clang will work for compiling the source, but not for the documentation.
- NOTE: on Ubuntu 16.04, you will need to use GCC 4 and not the default compiler (GCC 5) to run MADlib. Refer to MADLIB-1068 for details. The outstanding GCC 5 issue is being tracked under MADLIB-1145.
python 2.6 or 2.7
- python 3.x is not currently supported by MADlib.
cmake
- NOTE: the latest version of cmake might cause issues. Please try cmake 3.5.2 in case you get an error or a segmentation fault.
- NOTE: On Centos 6 (possibly other Linux variants), we have seen occasions where cmake will have issues running (seg fault) if the greenplum_path.sh file has been sourced prior to the cmake execution. If you encounter issues, you can use ldd on the cmake executable to confirm dynamic libraries are picked up from the Greenplum installation directories. If this is the case, start a new shell in which the greenplum_path.sh file is not sourced in your current running shell session. You can reference MADLIB-1093 for additional details.
An installed version of Greenplum Database or PostgreSQL (64-bit) 9.2+ with plpython support enabled.
- NOTE: plpython may not be enabled in Postgres by default.

Installing MADlib

In the $MADLIB_ROOT directory (location of the MADlib source) run the following commands:

mkdir build 
cd build 
cmake .. 
make -j8 # if this causes issues, switch back to a plan `make`

Above, we built the executables in the build folder. This can, however, be any user-named folder (henceforth called $BUILD_ROOT).

Deploying MADlib

Deploy MADlib into the database with MADlib package manager madpack located under $BUILD_ROOT/src/bin.

Run the MADlib deployment utility to install MADlib into each database that you want to use it:

Postgres:

$BUILD_ROOT/src/bin/madpack -s madlib –p postgres install

if environment variables are defined. Otherwise use a fully defined connection string:

$BUILD_ROOT/src/bin/madpack -s madlib -p postgres -c [user[/password]@][host][:port][/database] install

Greenplum Database:
```
$BUILD_ROOT/src/bin/madpack –p greenplum install
```
The above may need user/port/password setting depending on how the database has been configured.

To install:

$BUILD_ROOT/src/bin/madpack -p postgres -c [user[/password]@][host][:port][/database] install

To make sure that the installation is successful:

$BUILD_ROOT/src/bin/madpack -p postgres -c [user[/password]@][host][:port][/database] install-check

For more information on the usage of madpack:
```
$BUILD_ROOT/src/bin/madpack --help
```

Defining environment variables

The variables below will be automatically used by the madpack installer if no connection string is provided:

User: PGUSER or USER (defaults to OS username)
Password: PGPASSWORD (defaults to empty)
Host: PGHOST (defaults to 'localhost')
Database: PGDATABASE (defaults to OS username)
Port: PGPORT (defaults to 5432)

An example of deploying MADlib using the environment variables:

export PGPORT=5430
export PGHOST=127.0.0.1
export PGDATABASE=madlibtest
$BUILD_ROOT/src/bin/madpack -p postgres install

Upgrading MADlib gppkg

Download the MADlib binary
- Greenplum database : Download the .gppkg binary from Pivotal Network

Upgrade MADlib gppkg.

Greenplum Database:
- Upgrading gppkg to a higher version of MADlib:
  For example, upgrading from 1.15.1 to 1.16
  on Redhat / CentOS run the following as gpadmin:
```
gppkg -u <madlib_package_upgrading_to>
```
  Upgrade the MADlib deployment in the database
```
madpack -p <platform> -c <connection> upgrade
```
- Upgrading gppkg for the same version of MADlib:
  For example, upgrading from madlib_gppkg_1.16+1 to madlib_gppkg_1.16+2
  on Redhat / CentOS run the following as gpadmin:
```
gppkg -u <madlib_package_upgrading_to>
```
  MADlib deployment in the database does not need to be upgraded as the MADlib version has not changed.

Release Specific Installations

Sometimes there are release specific variations of the installation procedures. These exceptions are listed in this section.

06/27/19 - Upgrading MADlib from 1.15

Currently, upgrading the rpm from 1.15 using rpm -U does not work due to a change in the rpm post uninstall script in MADlib version 1.15.1. Below are the steps to follow to upgrade from MADlib version 1.15:

Remove existing MADlib rpm (this does not affect the database in any way)
rpm -e <madlib 1.15 package name>
Remove old MADlib files
rm -rf /usr/local/madlib/Versions
Install the MADlib 1.15.1 or 1.16 rpm
rpm -i <madlib 1.16 package name>
Upgrade the MADlib deployment in the database
madpack -p <platform> -c <connection> upgrade

01/11/18 - Upgrading MADlib to 1.13

The upgrade to v1.13 has a minor problem with some leftover functions. The issue can be fixed with the following commands before running the regular madpack upgrade command.

psql <<DB_NAME>> -c "DROP FUNCTION IF EXISTS <<SCHEMA>>.knn(VARCHAR);"
psql <<DB_NAME>> -c "DROP FUNCTION IF EXISTS <<SCHEMA>>.knn();"

<<DB_NAME>> denotes the name of the database.

<<SCHEMA>> denotes the name of the madlib schema.

We have also attached a script to this wiki page called 'fix_upgrade.sh' that you can use.

11/30/16 - Installation of MADlib 1.9.1 on GPDB 4.3.11

The procedure exactly the same as described below for installation of MADlib on GPDB 4.3.10 .

10/19/16 - Installation of MADlib 1.9.1 on GPDB 4.3.10

This is an important note for installation of MADlib on GPDB 4.3.10. It does not apply to any other releases.

1) Fix madpack install utility
* issue: After gppkg installation MADlib, you must run the script
fix_madpack.sh BEFORE running the madpack utility (see below). The script is downloadable from the Pivotal Network.

2) install checks
* issue: some failures may happen on MADlib install checks, however the MADlib install actually completed OK.

This is a poor customer experience that will be fixed in the next release. On the positive side, once the installation is done, MADlib should work OK.

------------------------------

Page tree

Installation Guide

Super Quick Start

Quick Start With Binaries

Prerequisites

Installing MADlib

Installing from PGXN (PostgreSQL)

Prerequisites

Compiling From Source

Prerequisites

Installing MADlib

Deploying MADlib

Defining environment variables

Upgrading MADlib gppkg

Release Specific Installations

06/27/19 - Upgrading MADlib from 1.15

01/11/18 - Upgrading MADlib to 1.13

11/30/16 - Installation of MADlib 1.9.1 on GPDB 4.3.11

10/19/16 - Installation of MADlib 1.9.1 on GPDB 4.3.10