You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 16 Next »

Status

Current state: Under Discussion

Discussion threadhttps://mail-archives.apache.org/mod_mbox/flink-dev/201902.mbox/browser

JIRA Unable to render Jira issues macro, execution error.

Released: <Flink Version>

Please keep the discussion on the mailing list rather than commenting on the wiki (wiki discussions get unwieldy fast).

Motivation

Flink has defined a few standard metrics for jobs, tasks and operators. It also supports custom metrics in various scenarios. However, so far there is no standard or conventional metric definition for the connectors. Each connector defines their own metrics at the moment. This complicates operation and monitoring. Admittedly, different connectors may have different metrics, but some commonly used metrics can probably be standardized. This FLIP proposes a set of standard connector metrics that each connector should emit if applicable.

In the future, the other projects in Flink ecosystem may rely on this metric convention. Therefore, the connector implementations are expected to follow the conventions when reporting the metrics.

Public Interfaces

We propose to introduce a set of conventional / standard metrics for the connectors.

It is important to mention that

  • A connector implementation does not have to report all the defined metrics. But if a connector reports a metric of the same semantic defined below, the implementation should follow the convention.
  • The following metric convention is not a complete list. More conventional metric will be added over time.
  • The histogram metrics are usually very expensive. Due to its performance impact, we intentionally excluded them in this FLIP. Please see future work section for more details.

Source Metrics

Name

Type

Unit

Description

numBytesIn

Counter

Bytes

The total number of input bytes since the source started. Count towards the numBytesIn in TaskIOMetricsGroup.

Predefined. For FLIP-27 Sources, updated by SourceReader implementations via SourceReaderContext.

numBytesInPerSecond

Meter

Bytes/Sec

The input bytes per second.

Predefined. associated with numBytesIn.

numRecordsIn

Counter

Records

(Existing operator metric) The total number of input records since the source started.

The Source implementation should reused this existing operator metric instead of creating a new one.

Predefined. For FLIP-27 sources, updated by SourceReader implementations via SourceReaderContext.

numRecordsInPerSecond

Meter

Records/Sec

(Existing operator metric) The input records per second

The Source implementation should reused this existing operator metric instead of creating a new one.

Predefined. Associated with numRecordsIn.

numRecordsInErrorsCounterRecords

The total number of record that failed to consume, process or emit.

Predefined. For FLIP-27 sources, updated by SourceReader implementations via SourceReaderContext.

currentFetchEventTimeLagGaugems

The time in milliseconds from the record event timestamp to the timestamp Flink fetched the record.

This metric is an instantaneous value recorded for the last processed record.

This metric is provided because latency histogram could be expensive. The instantaneous latency value is usually a good enough indication of the latency.

currentFetchEventTimeLag = FetchTime - EventTime

Optional. For FLIP-27 sources, registered and updated by SourceReader implementations via MetricsGroup provided by SourceReaderContext,

currentEmitEventTimeLagGaugems

The time in milliseconds from the record event timestamp to the timestamp the record is emitted by the source connector.

This metric is an instantaneous value recorded for the last processed record.

This metric is provided because latency histogram could be expensive. The instantaneous latency value is usually a good enough indication of the latency.

currentEmitEventTimeLag = EmitTime - EventTime, where the EmitTime is the time the record leaves the source operator.

Predefined. For FLIP-27 sources, updated by ReaderOutput implementation.

watermarkLagGaugems

The time in milliseconds that the watermark lags behind the wall clock time.

watermarkLag = CurrentTime - Watermark

Predefined. For FLIP-27 sources, updated by ReaderOutput implementation.

sourceIdleTime

Gauge

ms

The time in milliseconds that the source has not processed any record.

sourceIdleTime = CurrentTime - LastRecordProcessTime

Optional. For FLIP-27 sources, registered and updated by SourceReader implementation via MetricsGroup provided by SourceReaderContext.

pendingBytesGaugeBytes

The number of bytes that have not been fetched by the source. e.g. the remaining bytes in a file after the file descriptor reading position.

Note that not every source reports this metric, but the metric of the same semantic should be reported with this name and specification if the Source does report.

Optional. For FLIP-27 sources, registered and updated by SourceReader implementation via MetricsGroup provided by SourceReaderContext.

pendingRecordsGaugeRecords

The number of records that have not been fetched by the source. e.g. the available records after the consumer offset in a Kafka partition.

Note that not every source reports this metric, but the metric of the same semantic should be reported with this name and specification if the Source does report.

Optional. For FLIP-27 sources, registered and updated by SourceReader implementation via MetricsGroup provided by SourceReaderContext.

Sink Metrics

Name

Type

Unit

Description

numBytesOut

Counter

Bytes

The total number of output bytes since the source started. Count towards the numBytesOut in TaskIOMetricsGroup

Predefined, updated by sink implementations.

numBytesOutPerSecond

Meter

Bytes/Sec

The output bytes per second

Predefined, associated with numBytesOut.

numRecordsOut

Counter

Records

(Existing operator metric) The total number of output records since the source started

The Sink implementation should reused this existing operator metric instead of creating a new one.

Predefined, updated by sink implementations.

numRecordsOutPerSecond

Meter

Records/Sec

(Existing operator metric) The output records per second

The Sink implementation should reused this existing operator metric instead of creating a new one.

Predefined, associated with numBytesOut.

numRecordsOutErrorsCounterRecord

The total number of records failed to send

Predefined, updated by sink implementations.

currentSendTimeGaugems

The time it takes to send the last record.

This metric is an instantaneous value recorded for the last processed record.

Optional, updated by sink implementations.

Scope

The metric group for each source and sink would be the same as ordinary operator scope, i.e. default to <host>.taskmanager.<tm_id>.<job_name>.<operator_name>.<subtask_index>

Additional connector specific metrics should also use the same scope.

Native Connector Metrics

If the connector has its original metrics, the original metric names should still be kept and reported, even some of the original metrics are exposed with standard metric names. That means the connector will double report such metrics.

API Changes

OperatorIOMetricGroup

Add the following metrics.

OperatorIOMetricsGroup
public class OperatorIOMetricGroup extends ProxyMetricGroup<OperatorMetricGroup> {
	private final Counter numBytesIn;
	private final Counter numBytesOut;

	private final Meter numBytesInRate;
	private final Meter numBytesOutRate;

	public Counter getNumBytesInCounter() {
		return numRecordsIn;
	}

	public Counter getNumBytesOutCounter() {
		return numRecordsOut;
	}

	public Meter getNumBytesInRateMeter() {
		return numRecordsInRate;
	}

	public Meter getNumBytesOutRate() {
		return numRecordsOutRate;
	}
}

SourceReaderContext

To provide the above SourceMetrics in the base implementation of FLIP-27, we add the following methods to SourceReaderContext.

SourceReaderContext
public interface SourceReaderContext {

	Counter getNumBytesInCounter();

	Counter getRecordsInCounter();

	Counter getNumRecordsInErrorsCounter();
}

Future Work

Opt in/out metrics

In this FLIP, we intentionally left some of the useful but potentially expensive metrics out of the scope. For example:

Name

Type

Unit

Description

recordSize

Histogram

Bytes

The size of a record.

eventTimeFetchLag

Histogram

ms

The latency occurred before Flink fetched the record.

fetchLatency = FetchTime - EventTime

eventTimeLag

Histogram

ms

The latency occurred before the record is emitted by the source connector.

latency = EmitTime - EventTime

sendTime

Histogram

ms

The time it takes to send a record

We plan to add these metrics to the convention by introducing optional metrics to allow user opt in/out these expensive metrics on demand. This will be discussed in a separate FLIP.

Proposed Changes

  1. Add the proposed metrics to the existing connectors.
  2. Mark the old metrics as deprecated if necessary.
  3. Correct the scope and metric names of the connectors if needed.

Compatibility, Deprecation, and Migration Plan

This FLIP proposes adding new metrics to the connectors and mark the old duplicate metrics as deprecated if necessary.

After some releases, we would like to remove some of the old metrics that are duplicates of the new standard metrics. But there is no strict timeline for that.

Test Plan

Standard connector metric test suites will be created to ensure the connector names are implemented correctly.

Rejected Alternatives

None

  • No labels