Tuscany SamplesThe Tuscany Samples are shipped with Tuscany binary and source releases. If you are using Tuscany from a release distribution then make sure you are looking at the documentation that corresponds to the samples as they stood at the time of the release. The contents of the Samples page contains the very latest documentation for the samples in trunk. In a distribution, the samples source code is found in the samples directory, directly under the root directory. The following sections are laid out to match the structure of the samples directory and its subdirectories. If you're new to Tuscany SCA start with the getting-started. Samples are generally presented in the form on an SCA contribution (look for directories ending in "-contribution") or as a webapp (look for directories ending in "-webapp"). The directories getting-started, learning-more and applications all contain sample SCA contributions of increasing complexity. The running-tuscany directory describes the various ways you can start the Tuscany runtime and install contributions. For each sample contribution described in this document we do suggest an example way to install it and start the composites it contains however the other approaches in running-tuscany should also work for most sample contributions. The extending-tuscany directory contains some examples of how to build new binding and implementation extensions for using in Tuscany. In the following text we us <some_text> to mean you have to replace it with whatever is appropriate in your environment. For example <tuscany_bin_distro> means the directory in which you install the Tuscany binary distribution. Instructions are colour coded as follows: Instructions in pink boxes are for the Ant user Instructions in silver boxes are for the Maven user Note. As some of these samples create and use local network connections you may need to configure your firewall, if you are running one, to allow the test to run successfully. getting-startedSCA defines a concept called a Contribution which is the way that SCA composite applications are packed for deployment. See sca introduction for more information on SCA concepts. The getting-started samples consist of simple SCA contributions that you can build and run as your first step to getting up and running with the Tuscany SCA Java runtime. You can build the sample contributions with either Maven or Ant and the running-tuscany directory contains information about the various ways you can start Tuscany and run these contributions. helloworld-contributionThis is a simple SCA contribution. It describes a composite application with a single component, HelloWorldComponent, implemented in Java. The component's Java implementation provides service "business logic" for saying hello to a person whose name is supplied as input to the service. The component is described in a composite called helloworld.composite as follows: <composite xmlns="http://docs.oasis-open.org/ns/opencsa/sca/200912" xmlns:tuscany="http://tuscany.apache.org/xmlns/sca/1.1" targetNamespace="http://sample" name="helloworld"> <component name="HelloworldComponent"> <implementation.java class="sample.HelloworldImpl"/> </component> </composite> The contribution also contains a composite called helloworldws.composite which describes a component, HelloworldWSComponent, that uses the same implementation but uses a web services binding: <composite xmlns="http://docs.oasis-open.org/ns/opencsa/sca/200912" xmlns:tuscany="http://tuscany.apache.org/xmlns/sca/1.1" targetNamespace="http://sample" name="helloworldws"> <component name="HelloworldWSComponent"> <implementation.java class="sample.HelloworldImpl"/> <service name="Helloworld"> <binding.ws /> </service> </component> </composite> This gives us a number of options for interacting with the components in this application. Firstly there is a JUnit test inside this project called HelloworldTestCase.java. This starts the Tuscany runtime and loads the contribution. It then talks to the HelloworldComponent over the default SCA binding (binding.sca) using a local Java proxy. Secondly the HelloworldWSComponent exposes a service with a web services binding. You can talk to this component using your favourite web services client. You can retrieve the WSDL for the web service automatically (see later) To build this contribution using Ant do the following: TODO To build this contribution using Maven do the following: cd helloworld-contribution mvn This will produce the contribution as follows: helloworld-contribution/target/helloworld-contribution.jar As the JUnit test deploys and runs the contribution we can use it as a first simple example of a running SCA application. To run the JUnit test using Ant do the following: TODO The contribution will be run automatically during the Maven build step and you will see the output from the JUnit test printed on the console in amongst the other output: Response from helloworld.sayHello("Petra") = Hello Petra To access the web service that the HelloworldWSComponent exposes we have to keep the runtime runntime running. To run the sample Ant so that you can access the web service do the following: TODO We have a Maven plugin that will run SCA contributions. You use it in Maven as follows: cd helloworld-contribution mvn tuscany:run You will note that in the console output you can see a web service being exposed by the binding.ws JAXWS provider: Binding.ws JAXWS provider - Service URI: http://localhost:8085/HelloworldWSComponent/Helloworld If you point you web browser at this address and add ?wsdl on the end: http://localhost:8085/HelloworldWSComponent/Helloworld?wsdl You'll see the WSDL for the service returned. Using you're favourite web services client, for example, the Web Services Explorer in Eclipse, you can send messages to this web service. When you're done use CTRL-C to stop the sample. For more information on getting started with the Apache Tuscany SCA Java runtime see the getting started page. helloworld-webappThis sample is not a contribution in it's own right but demonstrates how to run the helloworld-contribution inside a web application. As it's the same contribution the same two components, HelloworldComponent and HelloworldWSComponnet, will be started. To build this contribution using Ant do the following: TODO To build this contribution using Maven do the following: cd helloworld-webapp mvn This will produce a webapp as follows: helloworld-webapp/target/helloworld.war You can run this webapp by deploying it to you're favourite webapp container. For example, you can deploy to Tomcat and run as follows: cp helloworld-webapp/target/helloworld.war my_tomcat_install/webapps my_tomcat_install/bin/catalina run Once running point your web browser at: http://localhost:8080/helloworld/hello.html You'll see a link there to the WSDL that's automatically generated for the web service binding of the HelloworldWSComponent. Again you can use your favourite web services client to send messages to the service. TODO There is no example of accessing binding.sca from within the webapp. Do we want to include this? TODO For more information on creating webapps to run SCA contributions with Tuscany see - ? callback-apiTODO This feels like a learning-more sample. I wouldn't focus on callbacks with the first time user sca-scopesTODO This feels like a learning-more sample. I wouldn't focus on scopes with the first time user sca-include-contributionTODO This feels like a learning-more sample. I wouldn't focus on inclusion with the first time user running-tuscanyRunning something in Tuscany requires one or more contributions, and a method of launching the contributions to make the services they provide available. The sections below describes various means of launching contributions with the Tuscany SCA Java runtime. It's not important that you try all of these but they show you what's possible and hopefully show you how to use Tuscany in an environment that makes sense to you. Some of the running-tuscany sub-directories just contain a README that gives you instructions. For example, maven just tells you how to configure and run contributions using the maven-tuscany-plugin. Others contain code. For example, embedded-jse contains simple Java launchers that show you how to start some of the sample contributions from a Java program. The sample contributions in getting-started and learning-more should work regardless of which approach you adopt. However some approaches, like embedded-jse, don't have launchers for every single sample contribution. command-lineYou can execute a sample contribution from the command line on Windows or Linux. TODO Waiting for tuscany.bat to be reworked before correcting To execute a sample contribution from the command line on Windows, from a command prompt in the samples directory, run the command ... <tuscany_din_distro>\bin\tuscany.bat "contribution-name" for example cd <tuscany_din_distro>\samples\learning-more\binding-sca\calculator-contribution <tuscany_din_distro>\bin\tuscany.bat sample-binding-sca-calculator-contribution.jar or on *nix platforms, from a shell prompt in the samples directory, run the command ... cd <tuscany_din_distro>/samples/learning-more/binding-sca/calculator-contribution <tuscany_din_distro>/bin/tuscany.sh sample-binding-sca-calculator-contribution.jar eclipseTo import sample contributions into Eclipse you first need to import the Tuscany runtime. You then need to import the sample contribution into Eclipse as a project. Instructions for doing both of these things can be found here http://tuscany.apache.org/import-existing-tuscany-sca-projects-into-eclipse.html Note. these instructions refer to our 1.x code base but it holds true for our 2.x code base. Once you have a contribution imported into Eclipse and cleanly compiling against the Tuscany runtime jars you probably want to be able to run and debug it. The easiest way to do this is with a simple Java launcher. If you import the running-tuscany/embedded-jse project into Eclipse you'll see a number of such launcher programs which you can copy to launch the contribution(s) of your choice. Alternatively you can add a JUnit test case to the contribution that starts Tuscany and launches the contribution. See maven-junit as an example of how to do this. embedded-jseThis directory contains sample java launchers for the some of the Tuscany sample contributions from the learning-more directory. It shows you how to embed the Tuscany runtime in a Java program. To make you're own launchers simply copy and existing one and change the details of the contribution being loaded. You'll note that the same launcher code is used inside the contribution unit test demonstrated by maven-junit. To use the sample JSE launchers with ant execute the command ant <contributionname> where <contributionname> is one of the targets in the provided build.xml file To use the sample JSE launchers from Maven do the following: cd embedded-jse mvn This runs a JUnit test case that runs all the launchers in turn. embedded-osgiThe Tuscany runtime jars will also work within an OSGi enviroment. If you want to load them into a vanilla OSGi environment see the osgi directory. If you want Tuscany to create an OSGi environment for you this directory contains launchers that do just that. To use the sample OSGI launchers with ant do the following: cd embedded-osgi ant <contributionname> where <contributionname> is one of the targets in the build.xml file To use the sample JSE launchers from Maven do the following: cd embedded-osgi mvn This runs a JUnit test case that runs all the launchers in turn. mavenMaven can be used to install contributions. Tuscany has a special plugin (maven-tuscany-plugin) that makes this happen. Look for contributions that have the following configuration in their pom.xml file: <plugin> <groupId>org.apache.tuscany.maven.plugins</groupId> <artifactId>maven-tuscany-plugin</artifactId> <version>2.0-SNAPSHOT</version> </plugin> For contributions that have this, for example, learning-more/binding-sca/contribution-calculator, do the following cd samples/learning-more/binding-sca/contribution-calculator This will install the contribution in the Tuscany runtime, start the composite it contains, and then wait. At this point you can use maven-junitMaven will run JUnit tests found in a module's src/test/java directory automatically. If you use embedded-jse style code in the JUnit test to install a contribution and start any composites it contains they you can unit test your contributions. This directory contains a contribution and a unit test which installs the contribution using very similar code to that found in embedded-jse. To run the contributions unit test do the following: cd maven-junit/calculator-contribution mvn maven-junit-osgiYou can use a special Tuscany Maven plugin (maven-osgi-junit-plugin) to unit test contributions in a JUnit environment. This relies on adding some configuration to the Maven pom.xml. For example, if you look in maven-junit-osgi/calculator-osgi you'll see: <plugin> <groupId>org.apache.tuscany.maven.plugins</groupId> <artifactId>maven-osgi-junit-plugin</artifactId> <version>1.0</version> <dependencies> <dependency> <groupId>org.apache.tuscany.sca</groupId> <artifactId>tuscany-node-launcher-equinox</artifactId> <version>${pom.version}</version> </dependency> </dependencies> <executions> <execution> <id>osgi-test</id> <phase>test</phase> <goals> <goal>test</goal> </goals> <configuration> <systemProperties> <property> <name>osgi.configuration.area</name> <value>${project.build.directory}/equinox</value> </property> </systemProperties> </configuration> </execution> </executions> </plugin> This configures the maven-osgi-junit-plugin to use the tuscany-node-launcher-equinox to install the contribution represented by the calculator-osgi directory. As an alternative to this configuration you could use the contents of tuscany-node-launcher-equinox directly in your JUnit test to launch the Tuscany runtime using OSGi. To run the contributions unit test do the following: cd maven-junit/calculator-contribution mvn osgiThe Tuscany runtime can be run in a vanilla OSGi container such as Equinox. To do this you have to:
For example, to install a contribution in Equinox do the following On Windows, run java -jar ..\..\..\modules\osgi-3.5.0-v20090520.jar -configuration ..\..\..\features\configuration -clean -console On *Unix, run java -jar ../../../modules/osgi-3.5.0-v20090520.jar -configuration ../../../features/configuration -clean -console You should see the osgi console: osgi> osgi> Jun 22, 2009 1:32:27 PM org.apache.tuscany.sca.extensibility.equinox.EquinoxServiceDiscoveryActivator start INFO: Equinox-based service discoverer is now configured. You can run "ss" command under the osgi> to see the status of the bundles. osgi> ss Then you can install and start contributions as bundles by doing the following: osgi> install file:./path/to/<contribution_bundle.jar> Note that <contribution_bundle.jar> will need an activator in order to register the bundle as a SCA contribution Running on Felix See http://tuscany.apache.org/documentation-2x/running-tuscany-sca-2x-with-equinox-and-felix.html shellThis directory contains a sample shell program supporting simple commands to start and stop SCA composites. TODO We currently have two similar approaches available (see command-line). We need to merge the two together. To build the sample shell do this: mvn install To run it: ./sca at the prompt: start myNode ../../applications/store/target/sample-store.jar or: start myNode http://people.apache.org/~jsdelfino/tuscany/java/test/sample-store.jar also try: status stop myNode bye Starting and stopping composites is pretty fast. To see that, try the following ./sca <scripts/test.txt or ./sca <scripts/test-remote.txt The shell can also run as a Webapp. To try it install target/scashell.war in webappTuscany can be embedded inside a webapp alongside one or more SCA contributions. To execute sample webapp based contributions (contributions that have webapp at the end of their name) you can build the contribution using maven and then copy the resulting war file to your container of choice For example, for binding-jsonrpc/contribution-calculator-webapp, do the following: cd samples/binding-jsonrpc/contribution-calculator-webapp mvn cp target/sample-contribution-binding-jsonrpc-calculator-webapp.war <your_container_deployment-dir> As an alternative, sample webapp based contributions can be run within Jetty directly from Maven, look for webapp contributions that have the following configuration in their pom.xml file: <plugin> <groupId>org.mortbay.jetty</groupId> <artifactId>maven-jetty-plugin</artifactId> <version>6.1.18</version> </plugin> For contributions that have this, for example, binding-jsonrpc/contribution-calculator-webapp, do the following cd samples/binding-sca/contribution-calculator mvn jetty:run This will launch the contribution in the Jetty runtime and then wait. At this point you can use HTTP clients to send messages to services that the running SCA applcation exposes. For this example try pointing your browser at: http://localhost:8080/sample-binding-jsonrpc-calculator-webapp/ learning-moreThe samples found in the contributions below illustrate more of SCA and Tuscany's features in action. The contributions here are primarily focused on demonstrating the various SCA extensions that the Tuscany runtime supports, for example, bindings and implementations. The directories are named to let you easily find a sample of the extension you're interested in. You can identify contributions here as the name of the directory from which they are built ends with "-contribution". There are also webapp samples here. The names of these directories end with "-webapp". Refer to the information above in the "running-tuscany" section to find the various options for installing these sample contributions. We present an single default approach for each sample as an example. asyncThis sample demonstrates the SCA asynchronous progamming model in action as typified by services that are configured with the asyncInvocation intent. For example, from calculator-contribution @Remotable @AsyncInvocation public interface CalculatorServiceAsync { void calculateAsync(Integer n1, ResponseDispatch<String> response); } A client component can access an asynchronous service either synchronously or asynchronously. Asynchronous reference interfaces also have a special form, again from calculator-contribution: @Remotable public interface CalculateReferenceAsync { // Sync public String calculate(Integer i1); // Aysnc Poll public Response<String> calculateAsync(Integer i1); // Async Callback public Future<String> calculateAsync(Integer i1, AsyncHandler<String> handler); } calculator-contributionThis contribution defines synchronous and asynchronous component services and a client component which references both. During the test the client component exercise all three styles of reference interface operation against both the synchronous and asynchronous service. The contribution can be built using Ant as follows: cd learning-more/async/calculator-contribution ant The contribution can be installed and the composite it contains run using Ant as follows cd running-tuscany/embedded-jse ant sample-implementation-java-calculator-async-contribution The contribution can be built using Maven as follows: cd learning-more/async/calculator-contribution mvn The contribution can be installed and the composite it contains run using Maven as follows cd running-tuscany/embedded-jse mvn This will run several contributions including the sample-implementation-java-calculator-async-contribution. binding-cometThe Comet protocol allows a servlet to process IO asynchronously, receiving events when data is available for reading on the connection (rather than always using a blocking read), and writing data back on connections asynchronously (most likely responding to some event raised from some other source). weather-webappExecuting the command "mvn" in this sample project creates a web archive suitable for deployment to Tomcat. It makes use of the tuscany comet binding. The webapp can be built using Maven as follows: cd learning-more/binding-commet/weather-webapp mvn The webapp can be installed and run as follows: cd learning-more/binding-commet/weather-webapp cp target/sample-binding-comet-1.0.war <your_container_deployment-dir> start the container as appropriate binding-jmsThis binding supports message orient communication via the JMS API. helloworld-webappThis contribution packages an SCA application inside a webapp. The application has two components which exchange helloworld style messages over the JMS binding. The webapp can be built using Maven as follows: cd learning-more/binding-jms/helloworld-webapp mvn The webapp can be installed and run as follows: cd learning-more/binding-jms/helloworld-webapp cp target/helloworld-jms.war <your_container_deployment-dir> start the container as appropriate TODO By rights the webapp should be called sample-binding-jms-helloworld-webapp.war Once the webapp is deployed point your browser at: http://localhost:8080/helloworld-jms/ binding-jsonrpcThis binding supports communication over the JSON-RPC protocol. calculator-contributionThis sample demonstrates using the simple calculator service component which makes use of four other services for add, subtract, multiply and divide functions. In this variant of the calculator sample the AddService is configured to be invoked using the JSON-RPC protocol. You can see the configuration by looking in the src/main/resources/Calculator.composite xml file. The contribution Jar can be built using Ant as follows: cd learning-more/binding-jsonrpc/calculator-contribution ant The contribution can be installed and the composite it contains run using Ant as follows: cd running-tuscany/embedded-jse ant sample-implementation-java-calculator-async-contribution The contribution Jar can be built using Maven as follows: cd learning-more/binding-jsonrpc/calculator-contribution mvn The contribution can be installed and the composite it contains run using Maven as follows cd running-tuscany/embedded-jse mvn This will run several contributions including the sample-implementation-java-calculator-async-contribution. calculator-webappThis contribution packages the same calculator-contribution inside a webapp. The webapp can be built using Maven as follows: cd learning-more/binding-jsonrpc/calculator-webapp mvn The webapp can be installed and run as follows: cd learning-more/binding-jsonrpc/calculator-webapp cp target/sample-binding-jsonrpc-calculator-webapp.war <your_container_deployment-dir> start the container as appropriate Once the webapp is deployed point your browser at: http://localhost:8080/sample-binding-jsonrpc-calculator-webapp/ binding-rmiIn this example the calculator function is split over two contributions in order to demonstrate the remote method invocation binding (binding.rmi). The calculator-service-contribution contains a composite which defines a CalculatorServiceComponent which exposes a CalculatorService using binding.rmi. The calculator-reference-contribution contains a composite which also defines a CalculatorServiceComponent but which in this case calls the add, subtract, multiple and divide operations offered by the component in the calculator-service-contribution. The two contributions are run using separate Tuscany nodes and the resulting components communicate over RMI. Both contributions must be deployed and started for the sample to work; The contributions can be installed and the composite they contain run using Ant as follows: cd running-tuscany/embedded-jse ant sample-binding-rmi-calculator-contribution The contributions can be installed and the composite they contain run using Ant as follows: cd running-tuscany/embedded-jse mvn This will run several contributions including the binding-rmi sample contributions calculator-service-contributionThis contribution defines a CalculatorServiceComponent whose add, subtract, multiply and divide operations are available over RMI. The contribution Jar can be built using Ant as follows: cd learning-more/binding-rmi/calculator-service-contribution ant The contribution Jar can be built using Maven as follows: cd learning-more/binding-rmi/calculator-service-contribution mvn calculator-reference-contributionThis sample extends the calculator sample by replacing the local wired connections with RMI bindings. Instead of local add, subtract, multiply and divide components, an RMI service implementation now provides the add, subtract, multiply and divide interfaces and is hosted as an RMI server. References specified in the .composite file include an RMI binding which targets The contribution Jar can be built using Ant as follows: cd learning-more/binding-rmi/calculator-reference-contribution ant The contribution Jar can be built using Maven as follows: cd learning-more/binding-rmi/calculator-reference-contribution mvn binding-scaThis sample is the simplest sample other than that shown in the getting starting section. It uses the default SCA protocol for communicating between the various components of the caluclator application. calculator-contributionThe service and reference definitions in the Calculator.composite and CalculatorClient.composite files have no binding attributes, thereby defaulting to the SCA binding for communication between the running instances of the components. The contribution Jar can be built using Ant as follows: cd learning-more/binding-sca/calculator-contribution ant The contribution can be installed and the composite it contains run using Ant as follows: cd running-tuscany/embedded-jse ant sample-binding-sca-calculator-contribution The contribution Jar can be built using Maven as follows: cd learning-more/binding-sca/calculator-contribution mvn The contribution can be installed and the composite it contains run using Maven as follows cd running-tuscany/embedded-jse mvn This will run several contributions including the sample-binding-sca-calculator-contribution. binding-wsThe web service binding allows components to expose and call services using SOAP formatted messages primarily over HTTP. calculator-contributionThis contribution provides the four arithmetic operations in the calculator service, with the AddService being accessible as a web service via the URL http://localhost:8085/AddServiceComponent The contribution Jar can be built using Ant as follows: cd learning-more/binding-ws/calculator-contribution ant The contribution can be installed and the composite it contains run using Ant as follows: cd running-tuscany/embedded-jse ant sample-binding-ws-calculator-contribution The contribution Jar can be built using Maven as follows: cd learning-more/binding-ws/calculator-contribution mvn The contribution can be installed and the composite it contains run using Maven as follows cd running-tuscany/embedded-jse mvn This will run several contributions including the sample-binding-sca-calculator-contribution. contribution-helloworld-ws-sdoThis sample demonstrates an SCA reference that uses a web service binding which works with SDO. Instead if using JAXB style Java beans in the service interface they are replaced with SDO object. TODO Sample not currently enabled - awaiting SDO support distributed-osgiThese samples demonstrate the execution of Tuscany contributions in a OSGI environment. In particular the two bundle project in this directory define calculator objects that communicate with one another using the mechanisms defined in the OSGi remote services specifications. Here the Tuscany SCA runtime provides dynamic service discovery functionality. The calculator objects are registered as services directly with the OSGi bundle context by the bundle activator. Under the covers SCA provides the remote service disovery features that allow OSGi registered service to discover and communicate with one another across two JVMs. To run the sample each bundle must be build using maven and then loaded into a separate OSGi environment into which the Tuscany SCA runtime has already been installed (See "osgi" under running-tuscany) dosgi-dynamic-calculator-operationsThis bundle provides the calculator add, subtract, multiple, divide operations services. The bundle Jar can be built using Maven as follows: cd learning-more/distributed-osgi/dosgi-dynamic-calculator-operations mvn TODO projects should be called dosgi-dynamic-calculator-operations-bundle To run the bundle see "osgi" under running-tuscany. In short do the following: On Windows, run java -jar ..\..\..\..\modules\osgi-3.5.0-v20090520.jar -configuration ..\..\..\..\features\configuration -clean -console You should see the osgi console. You can run "ss" command under the osgi> to see the status of the bundles. osgi> ss Then you can install and start the bundle that's just been built: osgi> install file:./target/sample-dosgi-dynamic-calculator-operations.jar dosgi-dynamic-calculatorThe bundle Jar can be built using Maven as follows: cd learning-more/distributed-osgi/dosgi-dynamic-calculator mvn TODO projects should be called dosgi-dynamic-calculator-bundle To run the bundle see "osgi" under running-tuscany. In short do the following: On Windows, run java -jar ..\..\..\..\modules\osgi-3.5.0-v20090520.jar -configuration ..\..\..\..\features\configuration -clean -console You should see the osgi console. You can run "ss" command under the osgi> to see the status of the bundles. osgi> ss Then you can install and start the bundle that's just been built: osgi> install file:./target/sample-dosgi-dynamic-calculator.jar You should see the calculator service start. implementation-bpelBPEL component implementations will be useful to those who wish to describe a sequence of calls that must be made to other component services. contribution-helloworld-bpelThe contribution Jar can be built using Ant as follows: cd learning-more/implementation-bpel/helloworld-bpel-contribution ant The contribution can be installed and the composite it contains run using Ant as follows: ???? The contribution Jar can be built using Maven as follows: cd learning-more/implementation-bpel/helloworld-bpel-contribution mvn The contribution can be installed and the composite it contains run using Maven as follows ???? helloworld-bpel-webappimplementation-compositeTODO Understand and Document helloworld-recursiveTODO Understand and Document helloworld-recursive-wsTODO Understand and Document implementation-javaTODO Understand and Document contribution-calculatorTODO Understand and Document implementation.osgidosgi-calculatordosgi-calculator-operationsTODO Understand and Document implementation-scriptTODO Understand and Document contribution-calculatorTODO Understand and Document implementation-springTODO Understand and Document contribution-helloworld-springTODO Understand and Document helloworld-spring-webappimplementation-webapphelloworld-jaxrs-webapphelloworld-jms-webapphelloworld-js-client-webapphelloworld-jsf-webapphelloworld-jsp-webapphelloworld-servlet-webapphelloworld-stripes-webapplogging-scribeTODO Understand and Document maven-osgi-junitTODO Understand and Document calculator-osgiTODO Understand and Document calculator-rest-osgiTODO Understand and Document sca-clientTODO Understand and Document calculator-scaclientTODO Understand and Document helloworld-scaclientTODO Understand and Document extending-tuscanybinding-extensionTODO Understand and Document implementation-extensionTODO Understand and Document applicationsTODO Understand and Document storeTODO Understand and Document store-webappTODO Understand and Document |