This page describes the different clients supported by HiveServer2.  Other documentation for HiveServer2 includes:

• HiveServer2 Overview
• Setting Up HiveServer2
• Hive Configuration Properties:  HiveServer2

Beeline – Command Line Shell

HiveServer2 supports a command shell Beeline that works with HiveServer2. It's a JDBC client that is based on the SQLLine CLI (http://sqlline.sourceforge.net/). There’s detailed documentation of SQLLine which is applicable to Beeline as well.

Replacing the Implementation of Hive CLI Using Beeline

The Beeline shell works in both embedded mode as well as remote mode. In the embedded mode, it runs an embedded Hive (similar to Hive CLI) whereas remote mode is for connecting to a separate HiveServer2 process over Thrift. Starting in Hive 0.14, when Beeline is used with HiveServer2, it also prints the log messages from HiveServer2 for queries it executes to STDERR. Remote HiveServer2 mode is recommended for production use, as it is more secure and doesn't require direct HDFS/metastore access to be granted for users.

Beeline Example

% bin/beeline 
Hive version 0.11.0-SNAPSHOT by Apache
beeline> !connect jdbc:hive2://localhost:10000 scott tiger
!connect jdbc:hive2://localhost:10000 scott tiger 
Connecting to jdbc:hive2://localhost:10000
Connected to: Hive (version 0.10.0)
Driver: Hive (version 0.10.0-SNAPSHOT)
Transaction isolation: TRANSACTION_REPEATABLE_READ
0: jdbc:hive2://localhost:10000> show tables;
show tables;
+-------------------+
|     tab_name      |
+-------------------+
| primitives        |
| src               |
| src1              |
| src_json          |
| src_sequencefile  |
| src_thrift        |
| srcbucket         |
| srcbucket2        |
| srcpart           |
+-------------------+
9 rows selected (1.079 seconds)

You can also specify the connection parameters on command line. This means you can find the command with the connection string from your UNIX shell history. 

% beeline -u jdbc:hive2://localhost:10000/default -n scott -w password_file
Hive version 0.11.0-SNAPSHOT by Apache

Connecting to jdbc:hive2://localhost:10000/default

% bin/beeline
beeline> !connect jdbc:hive2://<host>:<port>/<db>;auth=noSasl hiveuser pass 

Beeline Commands

Beeline Hive Commands

Hive specific commands (same as Hive CLI commands) can be run from Beeline, when the Hive JDBC driver is used.

Use ";" (semicolon) to terminate commands. Comments in scripts can be specified using the "--" prefix.

Beeline Command Options

The Beeline CLI supports these command line options:

Output Formats

In Beeline, the result can be displayed in different formats. The format mode can be set with the outputformat option.

The following output formats are supported:

• table
• vertical
• xmlattr
• xmlelements
• separated-value formats (csv, tsv, csv2, tsv2, dsv)

table

The result is displayed in a table. A row of the result corresponds to a row in the table and the values in one row are displayed in separate columns in the table.
This is the default format mode.

+-----+---------+-----------------+
| id  |  value  |     comment     |
+-----+---------+-----------------+
| 1   | Value1  | Test comment 1  |
| 2   | Value2  | Test comment 2  |
| 3   | Value3  | Test comment 3  |
+-----+---------+-----------------+

vertical

Each row of the result is displayed in a block of key-value format, where the keys are the names of the columns.

id       1
value    Value1
comment  Test comment 1

id       2
value    Value2
comment  Test comment 2

id       3
value    Value3
comment  Test comment 3

xmlattr

The result is displayed in an XML format where each row is a "result" element in the XML.
The values of a row are displayed as attributes on the "result" element. The names of the attributes are the names of the columns.

<resultset>
  <result id="1" value="Value1" comment="Test comment 1"/>
  <result id="2" value="Value2" comment="Test comment 2"/>
  <result id="3" value="Value3" comment="Test comment 3"/>
</resultset>

xmlelements

The result is displayed in an XML format where each row is a "result" element in the XML. The values of a row are displayed as child elements of the result element.

<resultset>
  <result>
    <id>1</id>
    <value>Value1</value>
    <comment>Test comment 1</comment>
  </result>
  <result>
    <id>2</id>
    <value>Value2</value>
    <comment>Test comment 2</comment>
  </result>
  <result>
    <id>3</id>
    <value>Value3</value>
    <comment>Test comment 3</comment>
  </result>
</resultset>

Separated-Value Output Formats

The values of a row are separated by different delimiters.
There are five separated-value output formats available: csv, tsv, csv2, tsv2 and dsv.

csv2, tsv2, dsv

Starting with Hive 0.14 there are improved SV output formats available, namely dsv, csv2 and tsv2.
These three formats differ only with the delimiter between cells, which is comma for csv2, tab for tsv2, and configurable for dsv.

For the dsv format, the delimiter can be set with the delimiterForDSV option. The default delimiter is '|'.
Please be aware that only single character delimiters are supported.

id,value,comment
1,Value1,Test comment 1
2,Value2,Test comment 2
3,Value3,Test comment 3
 

id	value	comment
1	Value1	Test comment 1
2	Value2	Test comment 2
3	Value3	Test comment 3

id|value|comment
1|Value1|Test comment 1
2|Value2|Test comment 2
3|Value3|Test comment 3

Quoting in csv2, tsv2 and dsv Formats

If quoting is not disabled, double quotes are added around a value if it contains special characters (such as the delimiter or double quote character) or spans multiple lines.
Embedded double quotes are escaped with a preceding double quote.

The quoting can be disabled by setting the disable.quoting.for.sv system variable to true.
If the quoting is disabled, no double quotes are added around the values (even if they contains special characters) and the embedded double quotes are not escaped.
By default, the quoting is disabled.

id,value,comment
1,"Value,1",Value contains comma
2,"Value""2",Value contains double quote
3,Value'3,Value contains single quote

id,value,comment
1,Value,1,Value contains comma
2,Value"2,Value contains double quote
3,Value'3,Value contains single quote

csv, tsv

These two formats differ only with the delimiter between values, which is comma for csv and tab for tsv.
The values are always surrounded with single quote characters, even if the quoting is disabled by the disable.quoting.for.sv system variable.
These output formats don't escape the embedded single quotes.
Please be aware that these output formats are deprecated and only maintained for backward compatibility.

'id','value','comment'
'1','Value1','Test comment 1'
'2','Value2','Test comment 2'
'3','Value3','Test comment 3'

'id'	'value'	'comment'
'1'	'Value1'	'Test comment 1'
'2'	'Value2'	'Test comment 2'
'3'	'Value3'	'Test comment 3'

HiveServer2 Logging

Starting with Hive 0.14.0, HiveServer2 operation logs are available for Beeline clients. These parameters configure logging:

• hive.server2.logging.operation.enabled
• hive.server2.logging.operation.log.location
• hive.server2.logging.operation.verbose (Hive 0.14 to 1.1)
• hive.server2.logging.operation.level (Hive 1.2 onward)

 HIVE-11488 (Hive 2.0.0) adds the support of logging queryId and sessionId to HiveServer2 log file. To enable that, edit/add %X{queryId} and %X{sessionId} to the pattern format string of the logging configuration file.

JDBC

HiveServer2 has a JDBC driver. It supports both embedded and remote access to HiveServer2. Remote HiveServer2 mode is recommended for production use, as it is more secure and doesn't require direct HDFS/metastore access to be granted for users.

Connection URLs

Connection URL Format

The HiveServer2 URL is a string with the following syntax:

jdbc:hive2://<host1>:<port1>,<host2>:<port2>/dbName;initFile=<file>;sess_var_list?hive_conf_list#hive_var_list

where

• <host1>:<port1>,<host2>:<port2> is a server instance or a comma separated list of server instances to connect to (if dynamic service discovery is enabled). If empty, the embedded server will be used.
• dbName is the name of the initial database.
• <file> is the path of init script file (Hive 2.2.0 and later). This script file is written with SQL statements which will be executed automatically after connection. This option can be empty. 
• sess_var_list is a semicolon separated list of key=value pairs of session variables (e.g., user=foo;password=bar).
• hive_conf_list is a semicolon separated list of key=value pairs of Hive configuration variables for this session
• hive_var_list is a semicolon separated list of key=value pairs of Hive variables for this session.

Connection URL for Remote or Embedded Mode

The JDBC connection URL format has the prefix jdbc:hive2:// and the Driver class is org.apache.hive.jdbc.HiveDriver. Note that this is different from the old HiveServer.

• For a remote server, the URL format is jdbc:hive2://<host>:<port>/<db>;initFile=<file> (default port for HiveServer2 is 10000).
• For an embedded server, the URL format is jdbc:hive2:///;initFile=<file> (no host or port).

The initFile option is available in Hive 2.2.0 and later releases.

Connection URL When HiveServer2 Is Running in HTTP Mode

JDBC connection URL:  jdbc:hive2://<host>:<port>/<db>;transportMode=http;httpPath=<http_endpoint>, where:

• <http_endpoint> is the corresponding HTTP endpoint configured in hive-site.xml. Default value is cliservice.
• Default port for HTTP transport mode is 10001.

Connection URL When SSL Is Enabled in HiveServer2

JDBC connection URL:  jdbc:hive2://<host>:<port>/<db>;ssl=true;sslTrustStore=<trust_store_path>;trustStorePassword=<trust_store_password>, where:

• <trust_store_path> is the path where client's truststore file lives.
• <trust_store_password> is the password to access the truststore.

In HTTP mode:  jdbc:hive2://<host>:<port>/<db>;ssl=true;sslTrustStore=<trust_store_path>;trustStorePassword=<trust_store_password>;transportMode=http;httpPath=<http_endpoint>.

For versions earlier than 0.14, see the version note above.

Connection URL When ZooKeeper Service Discovery Is Enabled

ZooKeeper-based service discovery introduced in Hive 0.14.0 (HIVE-7935) enables high availability and rolling upgrade for HiveServer2. A JDBC URL that specifies <zookeeper quorum> needs to be used to make use of these features.

With further changes in Hive 2.0.0 and 1.3.0 (unreleased, HIVE-11581), none of the additional configuration parameters such as authentication mode, transport mode, or SSL parameters need to be specified, as they are retrieved from the ZooKeeper entries along with the hostname.

The JDBC connection URL: jdbc:hive2://<zookeeper quorum>/;serviceDiscoveryMode=zooKeeper;zooKeeperNamespace=hiveserver2 .

The <zookeeper quorum> is the same as the value of hive.zookeeper.quorum configuration parameter in hive-site.xml/hivserver2-site.xml used by HiveServer2.

Additional runtime parameters needed for querying can be provided within the URL as follows, by appending it as a ?<option> as before.

The JDBC connection URL: jdbc:hive2://<zookeeper quorum>/;serviceDiscoveryMode=zooKeeper;zooKeeperNamespace=hiveserver2?tez.queue.name=hive1&hive.server2.thrift.resultset.serialize.in.tasks=true 

Named Connection URLs

As of Hive 2.1.0 (HIVE-13670), Beeline now also supports named URL connect strings via usage of environment variables. If you try to do a !connect to a name that does not look like a URL, then Beeline will attempt to see if there is an environment variable called BEELINE_URL_<name>. For instance, if you specify !connect blue, it will look for BEELINE_URL_BLUE, and use that to connect. This should make it easier for system administrators to specify environment variables for users, and users need not type in the full URL each time to connect.

Reconnecting

Traditionally, !reconnect has worked to refresh a connection that has already been established. It is not able to do a fresh connect after !close has been run. As of Hive 2.1.0 (HIVE-13670), Beeline remembers the last URL successfully connected to in a session, and is able to reconnect even after a !close has been run. In addition, if a user does a !save, then this is saved in the beeline.properties file, which then allows !reconnect to connect to this saved last-connected-to URL across multiple Beeline sessions. This also allows the use of  beeline -r  from the command line to do a reconnect on startup.

Using JDBC

You can use JDBC to access data stored in a relational database or other tabular format.

1. Load the HiveServer2 JDBC driver. As of 1.2.0 applications no longer need to explicitly load JDBC drivers using Class.forName().
   
   For example:

   Class.forName("org.apache.hive.jdbc.HiveDriver");
   

2. Connect to the database by creating a Connection object with the JDBC driver.
   
   For example:

   Connection cnct = DriverManager.getConnection("jdbc:hive2://<host>:<port>", "<user>", "<password>");
   

   The default <port> is 10000. In non-secure configurations, specify a <user> for the query to run as. The <password> field value is ignored in non-secure mode.

   Connection cnct = DriverManager.getConnection("jdbc:hive2://<host>:<port>", "<user>", "");
   

   In Kerberos secure mode, the user information is based on the Kerberos credentials.

3. Submit SQL to the database by creating a Statement object and using its executeQuery() method.
   
   For example:

   Statement stmt = cnct.createStatement();
   ResultSet rset = stmt.executeQuery("SELECT foo FROM bar");
   

4. Process the result set, if necessary.

These steps are illustrated in the sample code below.

JDBC Client Sample Code

import java.sql.SQLException;
import java.sql.Connection;
import java.sql.ResultSet;
import java.sql.Statement;
import java.sql.DriverManager;

public class HiveJdbcClient {
  private static String driverName = "org.apache.hive.jdbc.HiveDriver";

  /**
   * @param args
   * @throws SQLException
   */
  public static void main(String[] args) throws SQLException {
      try {
      Class.forName(driverName);
    } catch (ClassNotFoundException e) {
      // TODO Auto-generated catch block
      e.printStackTrace();
      System.exit(1);
    }
    //replace "hive" here with the name of the user the queries should run as
    Connection con = DriverManager.getConnection("jdbc:hive2://localhost:10000/default", "hive", "");
    Statement stmt = con.createStatement();
    String tableName = "testHiveDriverTable";
    stmt.execute("drop table if exists " + tableName);
    stmt.execute("create table " + tableName + " (key int, value string)");
    // show tables
    String sql = "show tables '" + tableName + "'";
    System.out.println("Running: " + sql);
    ResultSet res = stmt.executeQuery(sql);
    if (res.next()) {
      System.out.println(res.getString(1));
    }
       // describe table
    sql = "describe " + tableName;
    System.out.println("Running: " + sql);
    res = stmt.executeQuery(sql);
    while (res.next()) {
      System.out.println(res.getString(1) + "\t" + res.getString(2));
    }

    // load data into table
    // NOTE: filepath has to be local to the hive server
    // NOTE: /tmp/a.txt is a ctrl-A separated file with two fields per line
    String filepath = "/tmp/a.txt";
    sql = "load data local inpath '" + filepath + "' into table " + tableName;
    System.out.println("Running: " + sql);
    stmt.execute(sql);

    // select * query
    sql = "select * from " + tableName;
    System.out.println("Running: " + sql);
    res = stmt.executeQuery(sql);
    while (res.next()) {
      System.out.println(String.valueOf(res.getInt(1)) + "\t" + res.getString(2));
    }

    // regular hive query
    sql = "select count(1) from " + tableName;
    System.out.println("Running: " + sql);
    res = stmt.executeQuery(sql);
    while (res.next()) {
      System.out.println(res.getString(1));
    }
  }
}

Running the JDBC Sample Code

# Then on the command-line
$ javac HiveJdbcClient.java

# To run the program using remote hiveserver in non-kerberos mode, we need the following jars in the classpath
# from hive/build/dist/lib
#     hive-jdbc*.jar
#     hive-service*.jar
#     libfb303-0.9.0.jar
#  	  libthrift-0.9.0.jar
# 	  log4j-1.2.16.jar
# 	  slf4j-api-1.6.1.jar
# 	  slf4j-log4j12-1.6.1.jar
# 	  commons-logging-1.0.4.jar
#
#
# To run the program using kerberos secure mode, we need the following jars in the classpath 
#     hive-exec*.jar
#     commons-configuration-1.6.jar (This is not needed with Hadoop 2.6.x and later).
#  and from hadoop
#     hadoop-core*.jar (use hadoop-common*.jar for Hadoop 2.x)
#
# To run the program in embedded mode, we need the following additional jars in the classpath
# from hive/build/dist/lib
#     hive-exec*.jar
#     hive-metastore*.jar
#     antlr-runtime-3.0.1.jar
#     derby.jar
#     jdo2-api-2.1.jar
#     jpox-core-1.2.2.jar
#     jpox-rdbms-1.2.2.jar
# and from hadoop/build
#     hadoop-core*.jar
# as well as hive/build/dist/conf, any HIVE_AUX_JARS_PATH set, 
# and hadoop jars necessary to run MR jobs (eg lzo codec)

$ java -cp $CLASSPATH HiveJdbcClient

Alternatively, you can run the following bash script, which will seed the data file and build your classpath before invoking the client. The script adds all the additional jars needed for using HiveServer2 in embedded mode as well.

#!/bin/bash
HADOOP_HOME=/your/path/to/hadoop
HIVE_HOME=/your/path/to/hive

echo -e '1\x01foo' > /tmp/a.txt
echo -e '2\x01bar' >> /tmp/a.txt

HADOOP_CORE=$(ls $HADOOP_HOME/hadoop-core*.jar)
CLASSPATH=.:$HIVE_HOME/conf:$(hadoop classpath)

for i in ${HIVE_HOME}/lib/*.jar ; do
    CLASSPATH=$CLASSPATH:$i
done

java -cp $CLASSPATH HiveJdbcClient

JDBC Data Types

The following table lists the data types implemented for HiveServer2 JDBC.

JDBC Client Setup for a Secure Cluster

When connecting to HiveServer2 with Kerberos authentication, the URL format is:

jdbc:hive2://<host>:<port>/<db>;principal=<Server_Principal_of_HiveServer2>

The client needs to have a valid Kerberos ticket in the ticket cache before connecting.

NOTE: If you don't have a "/" after the port number, the jdbc driver does not parse the hostname and ends up running HS2 in embedded mode . So if you are specifying a hostname, make sure you have a "/" or "/<dbname>" after the port number.

In the case of LDAP, CUSTOM or PAM authentication, the client needs to pass a valid user name and password to the JDBC connection API.

To use sasl.qop, add the following to the sessionconf part of your Hive JDBC hive connection string, e.g.

jdbc:hive://hostname/dbname;sasl.qop=auth-int

For more information, see Setting Up HiveServer2.

Multi-User Scenarios and Programmatic Login to Kerberos KDC

In the current approach of using Kerberos you need to have a valid Kerberos ticket in the ticket cache before connecting. This entails a static login (using kinit, key tab or ticketcache) and the restriction of one Kerberos user per client. These restrictions limit the usage in middleware systems and other multi-user scenarios, and in scenarios where the client wants to login programmatically to Kerberos KDC.

One way to mitigate the problem of multi-user scenarios is with secure proxy users (see HIVE-5155). Starting in Hive 0.13.0, support for secure proxy users has two components:

• Direct proxy access for privileged Hadoop users (HIVE-5155). This enables a privileged user to directly specify an alternate session user during the connection. If the connecting user has Hadoop level privilege to impersonate the requested userid, then HiveServer2 will run the session as that requested user.
• Delegation token based connection for Oozie (OOZIE-1457). This is the common mechanism for Hadoop ecosystem components.
  
  Proxy user privileges in the Hadoop ecosystem are associated with both user names and hosts. That is, the privilege is available for certain users from certain hosts.  Delegation tokens in Hive are meant to be used if you are connecting from one authorized (blessed) machine and later you need to make a connection from another non-blessed machine. You get the delegation token from a blessed machine and connect using the delegation token from a non-blessed machine. The primary use case is Oozie, which gets a delegation token from the server machine and then gets another connection from a Hadoop task node.
  
  
  If you are only making a JDBC connection as a privileged user from a single blessed machine, then direct proxy access is the simpler approach. You can just pass the user you need to impersonate in the JDBC URL by using the hive.server2.proxy.user=<user> parameter.
  
  See examples in ProxyAuthTest.java.
  
  Support for delegation tokens with HiveServer2 binary transport mode hive.server2.transport.mode has been available starting 0.13.0; support for this feature with HTTP transport mode was added in HIVE-13169, which should be part of Hive 2.1.0.

The other way is to use a pre-authenticated Kerberos Subject (see HIVE-6486). In this method, starting with Hive 0.13.0 the Hive JDBC client can use a pre-authenticated subject to authenticate to HiveServer2. This enables a middleware system to run queries as the user running the client.

Using Kerberos with a Pre-Authenticated Subject

To use a pre-authenticated subject you will need the following changes.

1. Add hive-exec*.jar to the classpath in addition to the regular Hive JDBC jars (commons-configuration-1.6.jar and hadoop-core*.jar are not required).
2. Add auth=kerberos and kerberosAuthType=fromSubject JDBC URL properties in addition to having the “principal" url property.
3. Open the connection in Subject.doAs().

The following code snippet illustrates the usage (refer to HIVE-6486 for a complete test case):

static Connection getConnection( Subject signedOnUserSubject ) throws Exception{
       Connection conn = (Connection) Subject.doAs(signedOnUserSubject, new PrivilegedExceptionAction<Object>()
           {
               public Object run()
               {
                       Connection con = null;
                       String JDBC_DB_URL = "jdbc:hive2://HiveHost:10000/default;" ||
                                              "principal=hive/localhost.localdomain@EXAMPLE.COM;" || 
                                              "kerberosAuthType=fromSubject";
                       try {
                               Class.forName(JDBC_DRIVER);
                               con =  DriverManager.getConnection(JDBC_DB_URL);
                       } catch (SQLException e) {
                               e.printStackTrace();
                       } catch (ClassNotFoundException e) {
                               e.printStackTrace();
                       }
                       return con;
               }
           });
       return conn;
}

Python Client

A Python client driver is available on github. For installation instructions, see Setting Up HiveServer2: Python Client Driver.

Ruby Client

A Ruby client driver is available on github at https://github.com/forward3d/rbhive.

Integration with SQuirrel SQL Client 

1. Download, install and start the SQuirrel SQL Client from the SQuirrel SQL website.
2. Select 'Drivers -> New Driver...' to register Hive's JDBC driver that works with HiveServer2.

   1. Enter the driver name and example URL:

         Name: Hive
         Example URL: jdbc:hive2://localhost:10000/default
      

3. Select 'Extra Class Path -> Add' to add the following jars from your local Hive and Hadoop distribution.

      HIVE_HOME/lib/hive-jdbc-*-standalone.jar
      HADOOP_HOME/share/hadoop/common/hadoop-common-*.jar 

   Version information

   Hive JDBC standalone jars are used in Hive 0.14.0 onward (HIVE-538); for previous versions of Hive, use HIVE_HOME/build/dist/lib/*.jar instead.

   The hadoop-common jars are for Hadoop 2.0; for previous versions of Hadoop, use HADOOP_HOME/hadoop-*-core.jar instead.

4. Select 'List Drivers'. This will cause SQuirrel to parse your jars for JDBC drivers and might take a few seconds. From the 'Class Name' input box select the Hive driver for working with HiveServer2:

      org.apache.hive.jdbc.HiveDriver
      

5. Click 'OK' to complete the driver registration. 

6. Select 'Aliases -> Add Alias...' to create a connection alias to your HiveServer2 instance.
   1. Give the connection alias a name in the 'Name' input box.
   2. Select the Hive driver from the 'Driver' drop-down.
   3. Modify the example URL as needed to point to your HiveServer2 instance.
   4. Enter 'User Name' and 'Password' and click 'OK' to save the connection alias.
   5. To connect to HiveServer2, double-click the Hive alias and click 'Connect'.

When the connection is established you will see errors in the log console and might get a warning that the driver is not JDBC 3.0 compatible. These alerts are due to yet-to-be-implemented parts of the JDBC metadata API and can safely be ignored. To test the connection enter SHOW TABLES in the console and click the run icon.

Also note that when a query is running, support for the 'Cancel' button is not yet available.

Integration with SQL Developer

Integration with Oracle SQLDeveloper is available using JDBC connection.

https://community.hortonworks.com/articles/1887/connect-oracle-sql-developer-to-hive.html

Integration with DbVisSoftware's DbVisualizer

1. Download, install and start DbVisualizer free or purchase DbVisualizer Pro from https://www.dbvis.com/.
2. Follow instructions on github.

Advanced Features for Integration with Other Tools

Supporting Cookie Replay in HTTP Mode

HIVE-9709 introduced support for the JDBC driver to enable cookie replay. This is turned on by default so that incoming cookies can be sent back to the server for authentication.  

The JDBC connection URL when enabled should look like this:

jdbc:hive2://<host>:<port>/<db>?transportMode=http;httpPath=<http_endpoint>;cookieAuth=true;cookieName=<cookie_name>

• cookieAuth is set to true by default.
• cookieName: If any of the incoming cookies' keys match the value of cookieName, the JDBC driver will not send any login credentials/Kerberos ticket to the server. The client will just send the cookie alone back to the server for authentication. The default value of cookieName is hive.server2.auth (this is the HiveServer2 cookie name). 
• To turn off cookie replay, cookieAuth=false must be used in the JDBC URL.
• Important Note: As part of HIVE-9709, we upgraded Apache http-client and http-core components of Hive to 4.4. To avoid any collision between this upgraded version of HttpComponents and other any versions that might be present in your system (such as the one provided by Apache Hadoop 2.6 which uses http-client and http-core components version of 4.2.5), the client is expected to set CLASSPATH in such a way that Beeline-related jars appear before HADOOP lib jars. This is achieved via setting HADOOP_USER_CLASSPATH_FIRST=true before using hive-jdbc. In fact, in bin/beeline.sh we do this!

Using 2-way SSL in HTTP Mode 

HIVE-10447 enabled the JDBC driver to support 2-way SSL in HTTP mode. Please note that HiveServer2 currently does not support 2-way SSL. So this feature is handy when there is an intermediate server such as Knox which requires client to support 2-way SSL.

JDBC connection URL:

jdbc:hive2://<host>:<port>/<db>;ssl=true;twoWay=true;sslTrustStore=<trust_store_path>;trustStorePassword=<trust_store_password>;sslKeyStore=<key_store_path>;keyStorePassword=<key_store_password>?transportMode=http;httpPath=<http_endpoint>

• <trust_store_path> is the path where the client's truststore file lives. This is a mandatory non-empty field.
• <trust_store_password> is the password to access the truststore.
• <key_store_path> is the path where the client's keystore file lives. This is a mandatory non-empty field.
• <key_store_password> is the password to access the keystore.

For versions earlier than 0.14, see the version note above.

Passing HTTP Header Key/Value Pairs via JDBC Driver

HIVE-10339 introduced an option for clients to provide custom HTTP headers that can be sent to the underlying server (Hive 1.2.0 and later).

JDBC connection URL:

jdbc:hive2://<host>:<port>/<db>;transportMode=http;httpPath=<http_endpoint>;http.header.<name1>=<value1>;http.header.<name2>=<value2>

When the above URL is specified, Beeline will call underlying requests to add an HTTP header set to <name1> and <value1> and another HTTP header set to <name2> and <value2>. This is helpful when the end user needs to send identity in an HTTP header down to intermediate servers such as Knox via Beeline for authentication, for example http.header.USERNAME=<value1>;http.header.PASSWORD=<value2>.

For versions earlier than 0.14, see the version note above.

Save