Creating a Flink Stateful Functions Release

This is based on the release guide of the Apache Beam project: https://beam.apache.org/contribute/release-guide/

Introduction

The Apache Flink project periodically declares and publishes releases. A release is one or more packages of the project artifact(s) that are approved for general public distribution and use. They may come with various degrees of caveat regarding their perceived quality and potential for change, such as “alpha”, “beta”, “incubating”, “stable”, etc.

The Flink community treats releases with great importance. They are a public face of the project and most users interact with the project only through the releases. Releases are signed off by the entire Flink community in a public vote.

Each release is executed by a Release Manager, who is selected/proposed by the Flink PMC members. This document describes the process that the Release Manager follows to perform a release. Any changes to this process should be discussed and adopted on the dev@ mailing list.

Please remember that publishing software has legal consequences. This guide complements the foundation-wide Product Release Policy and Release Distribution Policy.

Overview

The release process consists of several steps:

Decide to release
Prepare for the release
Build a release candidate
Vote on the release candidate
If necessary, fix any issues and go back to step 3.
Finalize the release
Promote the release

Decide to release

Deciding to release and selecting a Release Manager is the first step of the release process. This is a consensus-based decision of the entire community.

Anybody can propose a release on the dev@ mailing list, giving a solid argument and nominating a committer as the Release Manager (including themselves). There’s no formal process, no vote requirements, and no timing requirements. Any objections should be resolved by consensus before starting the release.

In general, the community prefers to have a rotating set of 3-5 Release Managers. Keeping a small core set of managers allows enough people to build expertise in this area and improve processes over time, without Release Managers needing to re-learn the processes for each release. That said, if you are a committer interested in serving the community in this way, please reach out to the community on the dev@ mailing list.

Checklist to proceed to the next step

Community agrees to release
Community selects a Release Manager

Prepare for the release

Before your first release, you should perform one-time configuration steps. This will set up your security keys for signing the release and access to various release repositories.

To prepare for each release, you should audit the project status in the JIRA issue tracker, and do necessary bookkeeping. Finally, you should create a release branch from which individual release candidates will be built.

One-time setup instructions

GPG Key

You need to have a GPG key to sign the release artifacts. Please be aware of the ASF-wide release signing guidelines. If you don’t have a GPG key associated with your Apache account, please create one according to the guidelines.

Determine your Apache GPG Key and Key ID, as follows:

gpg --list-keys

This will list your GPG keys. One of these should reflect your Apache account, for example:

--------------------------------------------------
pub   2048R/845E6689 2016-02-23
uid                  Nomen Nescio <anonymous@apache.org>
sub   2048R/BA4D50BE 2016-02-23

Here, the key ID is the 8-digit hex string in the pub line: 845E6689.

Now, add your Apache GPG key to the Flink’s KEYS file in the release repository at dist.apache.org. Follow the instructions listed at the top of these files. (Note: Only PMC members have write access to the release repository. If you end up getting 403 errors ask on the mailing list for assistance.)

Configure git to use this key when signing code by giving it your key ID, as follows:

git config --global user.signingkey 845E6689

You may drop the --global option if you’d prefer to use this key for the current repository only.

You may wish to start gpg-agent to unlock your GPG key only once using your passphrase. Otherwise, you may need to enter this passphrase hundreds of times. The setup for gpg-agent varies based on operating system, but may be something like this:

eval $(gpg-agent --daemon --no-grab --write-env-file $HOME/.gpg-agent-info)
export GPG_TTY=$(tty)
export GPG_AGENT_INFO

Access to Apache Nexus repository

Configure access to the Apache Nexus repository, which enables final deployment of releases to the Maven Central Repository.

You log in with your Apache account.
Confirm you have appropriate access by finding org.apache.flink under Staging Profiles.
Navigate to your Profile (top right dropdown menu of the page).
Choose User Token from the dropdown, then click Access User Token. Copy a snippet of the Maven XML configuration block.

Insert this snippet twice into your global Maven settings.xml file, typically ${HOME}/.m2/settings.xml. The end result should look like this, where TOKEN_NAME and TOKEN_PASSWORDare your secret tokens:

settings.xml

<settings>
   <servers>
     <server>
       <id>apache.releases.https</id>
       <username>TOKEN_NAME</username>
       <password>TOKEN_PASSWORD</password>
     </server>
     <server>
       <id>apache.snapshots.https</id>
       <username>TOKEN_NAME</username>
       <password>TOKEN_PASSWORD</password>
     </server>
   </servers>
 </settings>

Website development setup

Get ready for updating the Flink website by following the website development instructions.

Create a new version in JIRA

When contributors resolve an issue in JIRA, they are tagging it with a release that will contain their changes. With the release currently underway, new issues should be resolved against a subsequent future release. Therefore, you should create a release item for this subsequent release, as follows:

In JIRA, navigate to the Flink > Administration > Versions.
Add a new release: choose the next minor version number compared to the one currently underway, select today’s date as the Start Date, and choose Add.

Triage release-blocking issues in JIRA

There could be outstanding release-blocking issues, which should be triaged before proceeding to build a release candidate. We track them by assigning a specific Fix version field even before the issue resolved.

The list of release-blocking issues is available at the version status page. Triage each unresolved issue with one of the following resolutions:

If the issue has been resolved and JIRA was not updated, resolve it accordingly.
If the issue has not been resolved and it is acceptable to defer this until the next release, update the Fix Version field to the new version you just created. Please consider discussing this with stakeholders and the dev@ mailing list, as appropriate.
If the issue has not been resolved and it is not acceptable to release until it is fixed, the release cannot proceed. Instead, work with the Flink community to resolve the issue.

Review Release Notes in JIRA

JIRA automatically generates Release Notes based on the Fix Version field applied to issues. Release Notes are intended fo users (not Flink committers/contributors). You should ensure that Release Notes are informative and useful.

Open the release notes from the version status page by choosing the release underway and clicking Release Notes.

You should verify that the issues listed automatically by JIRA are appropriate to appear in the Release Notes. Specifically, issues should:

Be appropriately classified as Bug, New Feature, Improvement, etc.
Represent noteworthy user-facing changes, such as new functionality, backward-incompatible API changes, or performance improvements.
Have occurred since the previous release; an issue that was introduced and fixed between releases should not appear in the Release Notes.
Have an issue title that makes sense when read on its own.

Adjust any of the above properties to the improve clarity and presentation of the Release Notes.

Ensure that the JIRA release notes are also included in the release notes of the documentation (see section "Review and update documentation").

Verify that a Release Build Works

Run mvn -Papache-release,run-e2e-tests clean install to ensure that the build processes that are specific to that profile are in good shape.

Create a release branch

Release candidates are built from a release branch. As a final step in preparation for the release, you should create the release branch, push it to the code repository (you should probably do this once the whole process is done), and update version information on the original branch.

Set up a few environment variables to simplify Maven commands that follow. (We use bash Unix syntax in this guide.)

RELEASE_VERSION="2.1.0"
SHORT_RELEASE_VERSION="2.1"
CURRENT_SNAPSHOT_VERSION="$SHORT_RELEASE_VERSION-SNAPSHOT"
NEXT_SNAPSHOT_VERSION="2.2-SNAPSHOT"
SHORT_NEXT_SNAPSHOT_VERSION="2.2"

If you are doing a new major/minor release (e.g. 2.0.0, 2.1.0), check out the version of the codebase from which you start the release. This may be HEAD of the master branch. Create a branch for the new version that we want to release before updating the master branch to the next development version:

$ git checkout master
$ RELEASE_VERSION=$SHORT_RELEASE_VERSION tools/releasing/create_release_branch.sh
$ git checkout master
$ OLD_VERSION=$CURRENT_SNAPSHOT_VERSION NEW_VERSION=$NEXT_SNAPSHOT_VERSION tools/releasing/update_branch_version.sh
$ git checkout release-$SHORT_RELEASE_VERSION

If you're creating a new bugfix release (e.g. 2.0.5), you will skip the above step and simply check out the the already existing branch for that version:

$ git checkout release-$SHORT_RELEASE_VERSION

If this is a major release, the newly created branch needs to be pushed to the official repository.

Next, for major releases, some configuration for our documentation builds needs to be manually updated, in the docs/config.toml file:, as listed below.

baseURL = '//nightlies.apache.org/flink/flink-statefun-docs-release-$SHORT_RELEASE_VERSION'
IsStable = true
Version = "$RELEASE_VERSION"
VersionTitle = "$SHORT_RELEASE_VERSION"
Branch = "release-$SHORT_RELEASE_VERSION"
MenuLinks = [
    ["Project Homepage", "//flink.apache.org"],
    ["JavaDocs", "//nightlies.apache.org/flink/flink-statefun-docs-release-$SHORT_RELEASE_VERSION/api/java/"],
  ]

After updating the docs configuration and pushing the new major release branch, as the last step you should also update the documentation build bot to also build the documentation for the new release branch. Check Managing Documentation on details on how to do that. You may also want to manually trigger a build to make the changes visible as soon as possible.

For major/minor releases add a link to the release documentation in docs/config.toml in the master branch.

$ git checkout master

PreviousDocs = [
    ["$SHORT_RELEASE_VERSION", "https://nightlies.apache.org/flink/flink-statefun-docs-release-$SHORT_RELEASE_VERSION"],
    ["3.1", "https://nightlies.apache.org/flink/flink-statefun-docs-release-3.1"],
    ["3.0", "https://nightlies.apache.org/flink/flink-statefun-docs-release-3.0"],
    ["2.2", "https://nightlies.apache.org/flink/flink-statefun-docs-release-2.2"]
  ]

The rest of this guide assumes that commands are run in the root of a repository on the branch of the release version with the above environment variables set.

Checklist to proceed to the next step

Release Manager’s GPG key is published to dist.apache.org
Release Manager’s GPG key is configured in git configuration
Release Manager has org.apache.flink listed under Staging Profiles in Nexus
Release Manager’s Nexus User Token is configured in settings.xml
JIRA release item for the subsequent release has been created
There are no release blocking JIRA issues
Release Notes in JIRA have been audited and adjusted
Release branch has been created and pushed if it is a major release.
Originating branch has the version information updated to the new version
docs/config.toml has been updated appropriately.
The new documentation for major releases is visible under https://ci.apache.org/projects/flink/flink-statefun-docs-release-$SHORT_RELEASE_VERSION (after at least one doc build finishes).
The new documentation for major releases do not contain "-SNAPSHOT" in its version title, and all links refer to the corresponding version docs instead of master.

Build a release candidate

The core of the release process is the build-vote-fix cycle. Each cycle produces one release candidate. The Release Manager repeats this cycle until the community approves one release candidate, which is then finalized.

Build and stage Java and Python artifacts

Set up a few environment variables to simplify Maven commands that follow. This identifies the release candidate being built. Start with RC_NUM equal to 1 and increment it for each candidate.

RC_NUM="1"
TAG="release-${RELEASE_VERSION}-rc${RC_NUM}"

Now, create a candidate branch:

RELEASE_VERSION=$RELEASE_VERSION RELEASE_CANDIDATE=$RC_NUM tools/releasing/create_release_branch.sh
OLD_VERSION=$CURRENT_SNAPSHOT_VERSION NEW_VERSION=$RELEASE_VERSION tools/releasing/update_branch_version.sh

Tag the release commit:

git tag -s ${TAG} -m "${TAG}"
git tag -s "statefun-sdk-go/v${RELEASE_VERSION}-rc${RC_NUM}" -m "${TAG}"

We now need to do several things:

Create the source release archive
Create the Python artifacts
Deploy jar artifacts to the Apache Nexus Repository, which is the staging area for deploying the jars to Maven Central

First, we build the source release:

$ RELEASE_VERSION=$RELEASE_VERSION tools/releasing/create_source_release.sh

Next, we build the Python artifacts:

$ RELEASE_VERSION=$RELEASE_VERSION tools/releasing/create_python_sdk_release.sh

You will be able to find the built source and Python release artifacts under the "release/" folder created under the project root directory.

Finally, we stage the maven artifacts:

$ tools/releasing/deploy_staging_jars.sh

Review all staged artifacts (https://repository.apache.org/). They should contain all relevant parts for each module, including pom.xml, jar, test jar, source, test source, javadoc, etc. Carefully review any new artifacts.

Close the staging repository on Apache Nexus. When prompted for a description, enter “Apache Flink Stateful Functions, version X, release candidate Y”.

Stage source and binary releases on dist.apache.org

Copy the source release to the dev repository of dist.apache.org.

If you have not already, check out the Flink section of the dev repository on dist.apache.org via Subversion. In a fresh directory:
```
svn checkout https://dist.apache.org/repos/dist/dev/flink --depth=immediates
```

Make a directory for the new release:

mkdir flink/flink-statefun-${RELEASE_VERSION}-rc${RC_NUM}

Copy all release distributions, hashes, and GPG signature:

mv <flink-statefun-dir>/release/* flink/flink-statefun-${RELEASE_VERSION}-rc${RC_NUM}

Add and commit all the files.

cd flink 
svn add flink-statefun-${RELEASE_VERSION}-rc${RC_NUM}
svn commit -m "Apache Flink Stateful Functions, version ${RELEASE_VERSION}, release candidate ${RC_NUM}"

Verify that files are present

(Push the release tag)

If you haven't pushed the release tag yet, here's the command:

Push tag

git push <remote> refs/tags/release-${RELEASE_VERSION}-rc${RC_NUM}
git push <remote> refs/tags/statefun-sdk-go/v${RELEASE_VERSION}-rc${RC_NUM}

Propose a pull request for website updates

The final step of building the candidate is to propose a website pull request.

Start by updating the variables for the latest released version in the top-level _config.yml, and list the new release in downloads.md, linking to the source code download and the Release Notes in JIRA. Also add a new blog entry announcing the release in _posts.

Finally, propose a pull request with these changes. (Don’t merge before finalizing the release.)

Update flink-statefun-playground (for major/minor releases only)

Create a new release-${SHORT_RELEASE_VERSION} branch in flink-statefun-playground by forking the dev branch.

Make sure that all statefun versions are updated to the new ${SHORT_RELEASE_VERSION} (grep for occurrences of the old version).

Checklist to proceed to the next step

Maven artifacts deployed to the staging repository of repository.apache.org
Source distribution deployed to the dev repository of dist.apache.org
Website pull request proposed to list the release
Check docs/config.toml to ensure that
- the version constants refer to the new version
- the baseurl does not point to flink-statefun-docs-master but flink-statefun-docs-release-X.Y instead

You can (optionally) also do additional verification by:

```
Check hashes (e.g. shasum -c *.sha512)
```
Check signatures (e.g. gpg --verify flink-statefun-1.2.3-source-release.tar.gz.asc flink-statefun-1.2.3-source-release.tar.gz)
grep for legal headers in each file.

Vote on the release candidate

Once you have built and individually reviewed the release candidate, please share it for the community-wide review. Please review foundation-wide voting guidelines for more information.

Start the review-and-vote thread on the dev@ mailing list. Here’s an email template; please adjust as you see fit.

From: Release Manager
To: dev@flink.apache.org
Subject: [VOTE] Apache Flink Stateful Functions Release 1.2.3, release candidate #3

Hi everyone,

Please review and vote on the release candidate #3 for the version 1.2.3 of Apache Flink Stateful Functions,
as follows:
[ ] +1, Approve the release
[ ] -1, Do not approve the release (please provide specific comments)

**Release Overview**

As an overview, the release consists of the following:
a) Stateful Functions canonical source distribution, to be deployed to the release repository at dist.apache.org
b) Stateful Functions Python SDK distributions to be deployed to PyPI
c) Maven artifacts to be deployed to the Maven Central Repository
d) Dockerfiles for new images to be deployed to Docker Hub

**Staging Areas to Review**

The staging areas containing the above mentioned artifacts are as follows, for your review:
* All artifacts for a) and b) can be found in the corresponding dev repository at dist.apache.org [2]
* All artifacts for c) can be found at the Apache Nexus Repository [3]
* PR for new Dockerfiles for this release [4]

All artifacts are signed with the key FFFFFFFFFFFFFFFFFFFFFF [5]

Other links for your review:
* JIRA release notes [6]
* source code tag "release-1.2.3-rc3" [7]
* PR to update the website Downloads page to include Stateful Functions links [8]

**Vote Duration**

The voting time will run for at least 72 hours.
It is adopted by majority approval, with at least 3 PMC affirmative votes.

Thanks,
Release manager

[1] link
[2] link
[3] link
[4] link
[5] https://dist.apache.org/repos/dist/release/flink/KEYS
[6] link
[7] link
[8] link

If there are any issues found in the release candidate, reply on the vote thread to cancel the vote. There’s no need to wait 72 hours. Proceed to the Fix Issues step below and address the problem. However, some issues don’t require cancellation. For example, if an issue is found in the website pull request, just correct it on the spot and the vote can continue as-is.

If there are no issues, reply on the vote thread to close the voting. Then, tally the votes in a separate email. Here’s an email template; please adjust as you see fit.

From: Release Manager
To: dev@flink.apache.org
Subject: [RESULT] [VOTE] Apache Flink Stateful Functions Release 1.2.3, release candidate #3

I'm happy to announce that we have unanimously approved this release.

There are XXX approving votes, XXX of which are binding:
* approver 1
* approver 2
* approver 3
* approver 4

There are no disapproving votes.

Thanks everyone!

Checklist to proceed to the finalization step

Community votes to release the proposed candidate, with at least three approving PMC votes

Fix any issues

Any issues identified during the community review and vote should be fixed in this step.

Code changes should be proposed as standard pull requests to the master branch and reviewed using the normal contributing process. Then, relevant changes should be cherry-picked into the release branch. The cherry-pick commits should then be proposed as the pull requests against the release branch, again reviewed and merged using the normal contributing process.

Once all issues have been resolved, you should go back and build a new release candidate with these changes.

Checklist to proceed to the next step

Issues identified during vote have been resolved, with fixes committed to the release branch.

Finalize the release

Once the release candidate has been reviewed and approved by the community, the release should be finalized. This involves the final deployment of the release candidate to the release repositories, merging of the website changes, etc.

Deploy Python artifacts to PyPI （Since 1.9）

Release manager should create a PyPI account and ask the PMC add this account to pyflink collaborator list with Maintainer role
(The PyPI admin account info can be found here. NOTE, only visible to PMC members) to deploy the Python artifacts to PyPI. The artifacts could be uploaded using twine(https://pypi.org/project/twine/). To install twine, just run:

$ pip install --upgrade twine==1.12.0

Download the python artifacts from dist.apache.org and upload it to pypi.org:

$ svn checkout https://dist.apache.org/repos/dist/dev/flink/flink-statefun-${RELEASE_VERSION}-rc${RC_NUM}
$ cd flink-statefun-${RELEASE_VERSION}-rc${RC_NUM}
$ twine upload --repository-url https://upload.pypi.org/legacy/ \
    apache-flink-statefun-${RELEASE_VERSION}.tar.gz apache-flink-${RELEASE_VERSION}.tar.gz.asc \
    apache_flink_statefun-${RELEASE_VERSION}-py3-none-any.whl apache_flink_statefun-${RELEASE_VERSION}-py3-none-any.whl.asc

Deploy JavaScript SDK to npm

The release manager should create an npmjs.com account and ask the PMC to be added as a maintainer to the apache-flink-statfun package. After being added as a maintainer it is possible to publish the JavaScript SDK by using npm.

Npm publish

cd flink-statefun/statefun-sdk-js
npm install --save-dev @types/node // save Node.js dev dependencies
npm run build // build the sdk
npm login
npm publish --access public

Deploy artifacts to Maven Central Repository

Use the Apache Nexus repository to release the staged binary artifacts to the Maven Central repository. In the Staging Repositories section, find the relevant release candidate orgapacheflink-XXX entry and click Release. Drop all other release candidates that are not being released. When prompted for a description, enter “Apache Flink Stateful Functions, version X”.

Deploy source and binary releases to dist.apache.org

Copy the source and binary releases from the dev repository to the release repository at dist.apache.org using Subversion.

$ svn move -m "Release Apache Flink Stateful Functions ${RELEASE_VERSION}" \
    https://dist.apache.org/repos/dist/dev/flink/flink-statefun-${RELEASE_VERSION}-rc${RC_NUM} \
    https://dist.apache.org/repos/dist/release/flink/flink-statefun-${RELEASE_VERSION}

Remove old release candidates from dist.apache.org

Remove the old release candidates from https://dist.apache.org/repos/dist/dev/flink using Subversion.

Remove old release candidates from dist.apache.org

svn checkout https://dist.apache.org/repos/dist/dev/flink --depth=immediates
cd flink
svn remove flink-statefun-${RELEASE_VERSION}-rc*
svn commit -m "Remove old release candidates for Apache Flink Stateful Functions ${RELEASE_VERSION}"

Remove outdated versions from dist.apache.org

For a new major release remove all release files older than 2 versions, e.g., when releasing 1.7, remove all releases <= 1.5.

For a new bugfix version remove all release files for previous bugfix releases in the same series, e.g., when releasing 1.7.1, remove the 1.7.0 release.

If you have not already, check out the Flink section of the release repository on dist.apache.org via Subversion. In a fresh directory:
```
 svn checkout https://dist.apache.org/repos/dist/release/flink --depth=immediates
 cd flink
```

Remove files for outdated releases and commit the changes.

 svn remove flink-statefun-<version_to_remove>
 svn commit

Verify that files are removed

Git tag

Create a new Git tag for the released version by copying the tag for the final release candidate, as follows:

git tag -s "release-${RELEASE_VERSION}" refs/tags/${TAG} -m "Release Stateful Functions ${RELEASE_VERSION}"

For the GoLang SDK we we also need to push another release tag

git tag -s "statefun-sdk-go/v${RELEASE_VERSION}" refs/tags/${TAG} -m "Release Stateful Functions ${RELEASE_VERSION}"

Don't forget to push the tags via

git push <remote> refs/tags/release-${RELEASE_VERSION}
git push <remote> refs/tags/statefun-sdk-go/v${RELEASE_VERSION}

Delete the RC tags on the remote repository

git push --delete <remote> refs/tags/${TAG}
git push --delete <remote> refs/tags/statefun-sdk-go/v${RELEASE_VERSION}-rc${RC_NUM}

Mark the version as released in JIRA

In JIRA, inside version management, hover over the current release and a settings menu will appear. Click Release, and select today’s date.

Update website to point to new stable release documentation (for major releases only)

In our website repository flink-web, for major releases we need to update the website to point to the new stable release.

In the _config.yml file under the root directory, update the following settings:

FLINK_STATEFUN_VERSION_STABLE: $RELEASE_VERSION
FLINK_STATEFUN_VERSION_STABLE_SHORT: $SHORT_RELEASE_VERSION
docs-statefun-stable: "https://ci.apache.org/projects/flink/flink-statefun-docs-release-$SHORT_RELEASE_VERSION"

Finally, rebuild the website and push.

Add download links for the new release to the website

In the _config.yml file under the root directory of flink-web, you will find a list of download links for previous releases.

Following the same format,

add a new entry to release_archive.flink_statefun
for major releases, add a new entry to flink_statefun_releases for the release binaries and sources
for minor releases, update the entry for the previous release in the series in flink_statefun_releases

Please pay notice to the ids assigned to the download entries. They should be unique and reflect their corresponding version number.

Publish the Dockerfiles for the new release

Note: the official Dockerfiles fetch some artifacts of the target StateFun version from Maven central. After publishing the artifacts, the Maven central repository can take some hours to start serving the new artifacts, so you may want to wait to do this step until you are ready to continue with the "Promote the release" steps below.

Follow the instructions in the flink-statefun-docker repo to build the new Dockerfiles and send an updated manifest to Docker Hub so the new images are built and published.

Checklist to proceed to the next step

Python artifacts released and indexed in the PyPI Repository
JavaScript artifacts released and indexed in the npm repository
Maven artifacts released and indexed in the Maven Central Repository (usually takes about a day to show up)
Source & binary distributions available in the release repository of https://dist.apache.org/repos/dist/release/flink/
Dev repository https://dist.apache.org/repos/dist/dev/flink/ is empty
Release tagged in the source code repository
Release version finalized in JIRA. (Note: Not all committers have administrator access to JIRA. If you end up getting permissions errors ask on the mailing list for assistance)
Website contains links to new release binaries and sources in download page
For major releases, the front page references the correct new major release version and directs to the correct link
Dockerfiles in flink-statefun-docker updated for the new release and the new images have been pushed to Dockerhub

Promote the release

Once the release has been finalized, the last step of the process is to promote the release within the project and beyond. Please wait for 24h after finalizing the release in accordance with the ASF release policy.

Merge website pull request

Merge the website pull request to list the release. Make sure to regenerate the website as well, as it isn't build automatically.

Apache mailing lists

Announce on the dev@ mailing list that the release has been finished.

Announce on the release on the user@ mailing list, listing major improvements and contributions.

Announce the release on the announce@apache.org mailing list.

From: Release Manager
To: dev@flink.apache.org, user@flink.apache.org, announce@apache.org
Subject: [ANNOUNCE] Apache Flink Stateful Functions 1.2.3 released

The Apache Flink community is very happy to announce the release of Apache Flink Stateful Functions 1.2.3.

Stateful Functions is an API that simplifies building distributed stateful applications.
It's based on functions with persistent state that can interact dynamically with strong consistency guarantees.

Please check out the release blog post for an overview of the release:
https://flink.apache.org/news/2020/04/07/release-statefun-2.0.0.html

The release is available for download at:
https://flink.apache.org/downloads.html

Maven artifacts for Stateful Functions can be found at:
https://search.maven.org/search?q=g:org.apache.flink%20statefun

Python SDK for Stateful Functions published to the PyPI index can be found at:
https://pypi.org/project/apache-flink-statefun/

Official Docker image for building Stateful Functions applications can be found at:
https://hub.docker.com/_/flink-statefun

The full release notes are available in Jira:
https://issues.apache.org/jira/secure/ReleaseNote.jspa?projectId=12315522&version=12346878

We would like to thank all contributors of the Apache Flink community who made this release possible!

Regards,
Release Manager

Recordkeeping

Use reporter.apache.org to seed the information about the release into future project reports.

Flink blog

Major or otherwise important releases should have a blog post. Write one if needed for this particular release. Minor releases that don’t introduce new major functionality don’t necessarily need to be blogged.

Please make sure that the release notes of the documentation (see section "Review and update documentation") are linked from the blog post of a major release.
We usually include the names of all contributors in the announcement blog post. Use the following command to get the list of contributors:

git log --pretty="%an%n%cn" <fromCommit>..<toCommit> | sort | uniq | tr "\n" "," | sed 's/,/, /g'

Social media

Tweet, post on Facebook, LinkedIn, and other platforms. Ask other contributors to do the same.

Improve the process

It is important that we improve the release processes over time. Once you’ve finished the release, please take a step back and look what areas of this process and be improved. Perhaps some part of the process can be simplified. Perhaps parts of this guide can be clarified.

If we have specific ideas, please start a discussion on the dev@ mailing list and/or propose a pull request to update this guide. Thanks!

Page tree

Creating a Flink Stateful Functions Release

Introduction

Overview

Decide to release

Checklist to proceed to the next step

Prepare for the release

One-time setup instructions

GPG Key

Access to Apache Nexus repository

Website development setup

Create a new version in JIRA

Triage release-blocking issues in JIRA

Review Release Notes in JIRA

Verify that a Release Build Works

Create a release branch

Checklist to proceed to the next step

Build a release candidate

Build and stage Java and Python artifacts

Stage source and binary releases on dist.apache.org

Propose a pull request for website updates

Update flink-statefun-playground (for major/minor releases only)

Checklist to proceed to the next step

Vote on the release candidate

Checklist to proceed to the finalization step

Fix any issues

Checklist to proceed to the next step

Finalize the release

Deploy Python artifacts to PyPI （Since 1.9）

Deploy JavaScript SDK to npm

Deploy artifacts to Maven Central Repository

Deploy source and binary releases to dist.apache.org

Remove old release candidates from dist.apache.org

Remove outdated versions from dist.apache.org

Git tag

Mark the version as released in JIRA

Update website to point to new stable release documentation (for major releases only)

Add download links for the new release to the website

Publish the Dockerfiles for the new release

Checklist to proceed to the next step

Promote the release

Merge website pull request

Apache mailing lists

Recordkeeping

Flink blog

Social media

Improve the process