Test Case ID | Test Case Name | Steps | Expected Results | Priority | Test Case Type( Sanity | Functional | | Status | Comments |
1 | Enable RVR and check the functionality | 1.enable the RVR | 2 router should be created and both should have same public IP | P1 | Functional/Sanity | PASS |
|
2 | disable RVR and check the functionality | 1.disable the RVR | redundant router to be destroyed once we disable the RVR | P1 | Functional/Sanity |
|
|
3 | Create VMs after enabling RVR | 1.Enable the RVR | VM deployment should be successful and Routers(master&Backup) status is up and running. | P1 | Functional/Sanity | PASS |
|
4 | Create VM with new account after enabling the RVR | 1.Enable the RVR | VM deployment should be successful. Routers(master&Backup)VMs to be created. | P2 | Functional | PASS |
|
5 | Check alerts and logs related RVR | check the logs for error while performing RVR related actions like enable router,disable router and failover | No erros should be observed in the logs.Alert message should be logged | P3 | Functional | PASS |
|
6 | check the redundant status on VR |
|
|
|
| PASS |
|
7 | Shutdown the master Router | 1. Enable the RVR | Backup Router becomes Master | P1 | Functional | PASS |
|
8 | Create an Instance after stopping MasterRouter | 1. Enable the RVR | Backup outer becomes Master router | P2 | Functional | PASS |
|
10 | Create an Instance after stopping/rebooting Backup Router | 1. Enable the RVR | Deploy VM should be successful | P2 | Functional | PASS |
|
11 | Network disconnect in one Router | 1. Enable the RVR | Backup Router becomes Master | P3 | Functional | PASS |
|
12 | Configure PF rule and stop the Master router | 1. Enable the RVR | Backup router should become master router and the new Master should contains all the configured PF rules. | P1 | Functional/Sanity |
|
|
13 | Delete PF rules when backup router becomes Master Router | 1. Enable the RVR | Backup router should become master router and able to delete the PF rules after fail-over | P2 | Functional |
|
|
14 | ADD the load balance rule, then assign to instance and perform fail-over | 1. Enable the RVR | Backup router should become master router and the new Master should contains all the configured LB rules. | P1 | Functional |
|
|
15 | ADD the load balance rule and perform fail over and then assign to instance after Master becomes Backup | 1. Enable the RVR | Backup router should become master router . | P2 | Functional |
|
|
16 | Perform AcquireIP after failover happened. | 1. Enable the RVR | Able to acquire new IP after fail-Over | P1 | Functional | PASS |
|
17 | Perform fail over and disable the redundant router | 1. Enable the RVR | Only One router should be Up and running | P2 | Functional | PASS |
|
18 | Reboot the instance and do the fail-over | 1. Enable the RVR | Instance reboot to successful and Instance public traffic should pass through new master router after fail-over. | P1 | Functional | PASS |
|
19 | Perform the network restart and see routers will be recreated |
|
| P1 |
| PASS |
|
20 | Check the router status by performing fail over, after enabling redundant router, stopping the routers. |
|
| P1 |
| PASS |
|
21 | Verify the Acquire IP functionality after enabling/disabling the redundant routers |
|
| P1 |
| PASS |
|
22 | deploy vm using more than 1 guest network using N/W offering that has Redundant Router capability | 1. Create a new account. | 3.DeployVm should be successful with out any errors. | P1 | Functional | PASS |
|
23 | Perform Release IP after failover happened. | 1. Enable the RVR | Able to release IP after fail-Over - Check Dash Board , User_ip_address table | P1 | Functional | PASS |
|
|
|
|
|
|
|
|
|