Test Case ID |
Test Case Name |
Steps |
Expected Results |
Priority |
Test Case Type( Sanity | Functional | |
Status |
Comments |
1 |
Enable RVR and check the functionality |
1.enable the RVR |
2 router should be created and both should have same public IP |
P1 |
Functional/Sanity |
PASS |
|
3 |
Create VMs after enabling RVR |
1.Enable the RVR |
VM deployment should be successful and Routers(master&Backup) status is up and running. |
P1 |
Functional/Sanity |
PASS |
|
4 |
Create VM with new account after enabling the RVR |
1.Enable the RVR |
VM deployment should be successful. Routers(master&Backup)VMs to be created. |
P2 |
Functional |
PASS |
|
5 |
Check alerts and logs related RVR |
check the logs for error while performing RVR related actions like enable router,disable router and failover |
No erros should be observed in the logs.Alert message should be logged |
P3 |
Functional |
PASS |
|
6 |
check the redundant status on VR |
|
|
|
|
PASS |
|
7 |
Shutdown the master Router |
1. Enable the RVR |
Backup Router becomes Master |
P1 |
Functional |
PASS |
|
8 |
Create an Instance after stopping MasterRouter |
1. Enable the RVR |
Backup outer becomes Master router |
P2 |
Functional |
PASS |
|
10 |
Create an Instance after stopping/rebooting Backup Router |
1. Enable the RVR |
Deploy VM should be successful |
P2 |
Functional |
PASS |
|
11 |
Network disconnect in one Router |
1. Enable the RVR |
Backup Router becomes Master |
P3 |
Functional |
PASS |
|
12 |
Configure PF rule and stop the Master router |
1. Enable the RVR |
Backup router should become master router and the new Master should contains all the configured PF rules. |
P1 |
Functional/Sanity |
|
|
13 |
Delete PF rules when backup router becomes Master Router |
1. Enable the RVR |
Backup router should become master router and able to delete the PF rules after fail-over |
P2 |
Functional |
|
|
14 |
ADD the load balance rule, then assign to instance and perform fail-over |
1. Enable the RVR |
Backup router should become master router and the new Master should contains all the configured LB rules. |
P1 |
Functional |
|
|
15 |
ADD the load balance rule and perform fail over and then assign to instance after Master becomes Backup |
1. Enable the RVR |
Backup router should become master router . |
P2 |
Functional |
|
|
16 |
Perform AcquireIP after failover happened. |
1. Enable the RVR |
Able to acquire new IP after fail-Over |
P1 |
Functional |
PASS |
|
17 |
Perform fail over and disable the redundant router |
1. Enable the RVR |
Only One router should be Up and running |
P2 |
Functional |
PASS |
|
18 |
Reboot the instance and do the fail-over |
1. Enable the RVR |
Instance reboot to successful and Instance public traffic should pass through new master router after fail-over. |
P1 |
Functional |
PASS |
|
19 |
Perform the network restart and see routers will be recreated |
|
|
P1 |
|
PASS |
|
20 |
Check the router status by performing fail over, after enabling redundant router, stopping the routers. |
|
|
P1 |
|
PASS |
|
21 |
Verify the Acquire IP functionality after enabling/disabling the redundant routers |
|
|
P1 |
|
PASS |
|
22 |
deploy vm using more than 1 guest network using N/W offering that has Redundant Router capability |
1. Create a new account. |
3.DeployVm should be successful with out any errors. |
P1 |
Functional |
PASS |
|
23 |
Perform Release IP after failover happened. |
1. Enable the RVR |
Able to release IP after fail-Over - Check Dash Board , User_ip_address table |
P1 |
Functional |
PASS |
|
|
|
|
|
|
|
|
|