...
Config entities
Client entity types and names are more dynamic than broker and topic entity types and names. For example, client quotas can be tied to a user principle that is associated with a session as well as a client-id which is a generic workload identifier. This is not as simple as a broker with a broker id, so dynamic client configs should also have similar expressibility and extensibility to that which was introduced in KIP-546 for client quotas. The ClientConfigs APIs will follow the design pattern of the ClientQuotas APIs with a few differences.
...
Quota values are limited to double-precision 64-bit IEEE 754 format in the APIs introduced in KIP-546. However, client config values are strings in a .properties file until the config values are parsed into their respective types based on the client's config definition. Dynamic client configs should also be strings so that dynamic support can be added for any type of config in the future and remain consistent with static client configuration. This also allows dynamic client configs to be parsed and validated in the same way as static client configs.
Hierarchy for resolving dynamic client configs
The hierarchy for resolving client quotas is rather complex. This is because quotas need to be set on every application in the system to achieve consistent results. If a quota is set for client A but not client B, client B can end up hoarding resources because it is not limited. This would potentially cause client A to do work at a lower rate than what the quota specifies. Having a robust hierarchy for quotas allows the user to set quotas on all applications rather easily and then fine tune as needed. However, the hierarchy for client configs does not need to have the same amount of depth. There will just be a dynamic default and a dynamic config so that dynamic client configuration is consistent with static client configuration (e.g. .properties file & client defaults). Since users should not be able to change each others dynamic configs, the entities in the hierarchy will be scoped by at least user principle and optionally by client-id.
Making client config compatibility information available to the user
The user should be able to see what dynamic configs are supported for each application. However, clients that are using the same <user, client-id> entity may not necessarily support the same dynamic configs. A flawed solution to this is to store a map of ClientInformation
to lists of supported configs in each <user, client-id> entity config. The problem with storing the registration alongside configs is that the entity config could be updated concurrently if multiple clients with the same entity names register at the same time.
A better solution is to store config registrations in an internal topic. The Java producer and consumer clients can register the configs they they support with a DescribeClientConfigsRequest. The broker can write a key-value pair to an internal topic upon receiving the request where the key is the <user, client-id> entity and the value is ClientVersion along with the list of supported configs.
Ad hoc aggregations of registration data for a particular entity could be performed to give descriptive information about client config compatibility to the user. For example, all versions of clients that registered with an entity along with the supported configs for each version of client could be aggregated and returned to the user in the DescribeClientConfigsResponse
.
Public Interfaces
Admin Client Changes
Admin client calls will be added to support {Describe, Alter}ClientConfigs.
Network Protocol
Public Interfaces
...
Network Protocol
Code Block | ||
---|---|---|
| ||
{
"apiKey": 50,
"type": "request",
"name": "DescribeClientConfigsRequest",
"validVersions": "0",
"flexibleVersions": "none",
"fields": [
{ "name": "Components", "type": "[]ComponentData", "versions": "0+",
"about": "Filter components to apply to config entities.", "fields": [
{ "name": "EntityType", "type": "string", "versions": "0+",
"about": "The entity type that the filter component applies to." },
| ||
Code Block | ||
| ||
{ "apiKey": 50, "type": "request", "name": "DescribeClientConfigsRequest", "validVersions": "0", "flexibleVersions": "none", "fields": [ { "name": "ComponentsMatchType", "type": "[]ComponentDataint8", "versions": "0+", "about": "Filter components to apply to config entities.", "fields": [ { "name": "EntityTypeHow to match the entity {0 = exact name, 1 = default name, 2 = any specified name}." }, { "name": "Match", "type": "string", "versions": "0+", "nullableVersions": "0+", "about": "The entity type that the filter component applies to string to match against, or null if unused for the match type." }, ]}, { "name": "MatchTypeSupportedConfigs", "type": "int8[]string", "versions": "0+", "nullableVersions": "0+", "about": "HowThe toconfiguration matchkeys the entity {0 = exact nameto register, 1or =null defaultif name,not 2registering = any specified name}configuration keys." }, { "name": "MatchResolveEntity", "type": "stringbool", "versions": "0+", "nullableVersions": "0+", "about": "TheTrue stringif toan matchapplication against,is orrequesting nulldynamic ifconfigs unused for theitself, matchfalse typeotherwise." } ]}, { "name": "SupportedConfigsStrict", "type": "[]stringbool", "versions": "0+", "nullableVersions": "0+", "about": "TheWhether configurationthe keysmatch tois registerstrict, i.e. orshould nullexclude ifentities notwith registeringunspecified configurationentity keystypes." }, {] } { "nameapiKey": "ResolveEntity"50, "type": "boolresponse", "versionsname": "0+DescribeClientConfigsResponse", "validVersions": "0", "aboutflexibleVersions": "True if an application is requesting dynamic configs for itself, false otherwise." },"none", "fields": [ { "name": "StrictThrottleTimeMs", "type": "boolint32", "versions": "0+", "about": "WhetherThe duration thein matchmilliseconds isfor strict, i.e. should exclude entities with unspecified entity types." } ] } { "apiKey": 50, "type": "response", which the request was throttled due to a quota violation, or zero if the request did not violate any quota." }, { "name": "DescribeClientConfigsResponseErrorCode", "validVersionstype": "0int16", "flexibleVersionsversions": "none0+", "fields": [ { "nameabout": "ThrottleTimeMs", The error code, or `0` if the config description succeeded." }, { "name": "ErrorMessage", "type": "int32string", "versions": "0+", "nullableVersions": "0+", "about": "The durationerror inmessage, millisecondsor for`null` whichif the requestconfig wasdescription throttled due to a quota violation, or zero if the request did not violate any quota." }, { "name": "ErrorCode", "type": "int16", "versionssucceeded." }, { "name": "Entries", "type": "[]EntryData", "versions": "0+", "nullableVersions": "0+", "about": "TheA errorresult codeentry.", or `0` if the config description succeeded." }, "fields": [ { "name": "ErrorMessageEntity", "type": "string[]EntityData", "versions": "0+", "nullableVersions": "0+", "about": "The config errorentity messagedescription.", or `null` if the config description succeeded." }, "fields": [ { "name": "EntriesEntityType", "type": "[]EntryDatastring", "versions": "0+", "nullableVersions": "0+", "about": "AThe resultentity entrytype." }, "fields": [ { "name": "EntityEntityName", "type": "[]EntityDatastring", "versions": "0+", "nullableVersions": "0+", "about": "The config entity description.", "fields": [ name, or null if the default." ]}, { "name": "EntityTypeValues", "type": "string[]ValueData", "versions": "0+", "about": "The config values for the entity type." },.", "fields": [ { { "name": "EntityNameKey", "type": "string", "versions": "0+", "nullableVersions": "0+", "about": "The entity name, or null if the defaultconfiguration key." }, { "name": "EntityCompatibilityValue", "type": "[]VersionDatastring", "versions": "0+", "about": "EveryThe softwareconfiguration name and version of clients that registered configs with the broker along with the configs supported by that software name and version.", "fields": [ {value." } ]} ]} ]} ] } |
Code Block | ||
---|---|---|
| ||
{ "apiKey": 51, "type": "request", "name": "ClientInformationAlterClientConfigsRequest", "typevalidVersions": "string0", "versionsflexibleVersions": "0+none", "fields": [ { "name": "Entries", "type": "[]EntryData", "aboutversions": "0+"The, software name and version of one or more clients that registered configs under this entity." }, "about": "The configuration entries to alter.", "fields": [ { "name": "SupportedConfigsEntity", "type": "[]stringEntityData", "versions": "0+", "about": "The dynamic configs available for the clients with this software name and version." } config entity to alter.", "fields": [ { "name": "EntityType", "type": "string", "versions": "0+", ]} "about": "The entity type." ]}, { "name": "ValuesEntityName", "type": "[]ValueDatastring", "versions": "0+", "nullableVersions": "0+", "about": "The configname values forof the entity.", "fields": [ , or null if the default." } ]}, { "name": "KeyOps", "type": "string[]OpData", "versions": "0+", "about": "TheAn individual configuration entry keyto alter." }, "fields": [ { "name": "ValueKey", "type": "string", "versions": "0+", "about": "The configuration valuekey." } ]} ]} , ]} ] } | ||
Code Block | ||
| ||
{ "apiKeyname": 51"Value", "type": "requeststring", "nameversions": "AlterClientConfigsRequest0+", "validVersions": "0", "flexibleVersionsabout": "none", "fields": [ The value to set, otherwise ignored if the value is to be removed." }, { "name": "EntriesRemove", "type": "[]EntryDatabool", "versions": "0+", "about": "TheWhether the configuration entriesvalue should tobe alter."removed, "fields": [otherwise set." } ]} { "name": "Entity", " ]}, { "name": "ValidateOnly", "type": "[]EntityDatabool", "versions": "0+", "about": "TheWhether the configalteration entityshould tobe alter.", "fields": [ { "name": "EntityType", validated, but not performed." } ] } { "apiKey": 51, "type": "stringresponse", "versionsname": "0+AlterClientConfigsResponse", "validVersions": "0", "aboutflexibleVersions": "The entity type." }none", "fields": [ { "name": "EntityNameThrottleTimeMs", "type": "stringint32", "versions": "0+", "nullableVersionsabout": "0+", The duration in milliseconds for which the request was throttled "about": "The name of the entitydue to a quota violation, or nullzero if the default." } ]request did not violate any quota." }, { "name": "OpsEntries", "type": "[]OpDataEntryData", "versions": "0+", "about": "An individualThe configuration entryentries to alter.", "fields": [ { "name": "KeyErrorCode", "type": "stringint16", "versions": "0+", "about": "The configuration key error code, or `0` if the config alteration succeeded." }, { "name": "ValueErrorMessage", "type": "string", "versions": "0+", "nullableVersions": "0+", "about": "The valueerror to setmessage, otherwiseor ignored`null` if the valueconfig is to be removedalteration succeeded." }, { "name": "RemoveEntity", "type": "bool[]EntityData", "versions": "0+", "about": "WhetherThe theconfig configurationentity value should be removed, otherwise set." } ]}to alter.", "fields": [ ]}, { "name": "ValidateOnlyEntityType", "type": "boolstring", "versions": "0+", "about": "Whether the alteration should be validated, but not performed." } ] } { "apiKey": 51, The entity type." }, { "name": "EntityName", "type": "responsestring", "nameversions": "AlterClientConfigsResponse0+", "validVersionsnullableVersions": "0+", "flexibleVersions": "none", "fields": [ { "nameabout": "ThrottleTimeMs", "type": "int32", "versions": "0+", "about": "The duration in milliseconds for which the request was throttled due to a quota violation, or zero if the request did not violate any quota." }, { "name": "Entries", "type": "[]EntryData", "versions": "0+", "about": "The configuration entries to alter.", "fields": [ { "name": "ErrorCode", "type": "int16", "versions": "0+", "about": "The error code, or `0` if the config alteration succeeded." }, { "name": "ErrorMessage", "type": "string", "versions": "0+", "nullableVersions": "0+", "about": "The error message, or `null` if the config alteration succeeded." }, { "name": "Entity", "type": "[]EntityData", "versions": "0+", "about": "The config entity to alter.", "fields": [ { "name": "EntityType", "type": "string", "versions": "0+", "about": "The entity type." }, { "name": "EntityName", "type": "string", "versions": "0+", "nullableVersions": "0+", "about": "The name of the entity, or null if the default." } ]} ]} ] } |
Proposed Changes
Broker Changes
If a {Describe, Alter}ClientConfigsRequest
is made without a user component, an InvalidRequest error code will be returned to the client. Apart from this, when the EntityRequest field is not set to true, the mechanics of the <user, client-id> or user config entity descriptions are very similar to the mechanics outlined in KIP-546. This is because the bulk of the code in the brokers that handles fetching client quota entity configs from zookeeper can be reused for dynamic client configs.
Default dynamic client configs will be stored in the children of the znode /config/users, while client-id specific dynamic client configs will be stored in the children of /config/users/<user>/clients.
The user config is updated when the client-id component entity name in the AlterClientConfigsRequest
is null. The <user, client-id> config is updated otherwise.
Client configs will have the following order of precedence:
/config/users/<user>/clients/<client-id>
/config/users/<user>
When the broker handles a DescribeClientConfigsRequest
that a client is making for it's own dynamic configs (e.g. ResolveEntity field set to true), the user config and the <user, client-id> config will be returned as one entity whose configs are resolved with the above order of precedence.
Client quotas are stored in these znodes as well. However, all configs that are not quota configs are filtered out when constructing a DescribeClientQuotasResponse
. Similar to this, all configs that are not dynamic client configs will be filtered out when constructing a DescribeClientConfigsResponse
. The value for each key will also be validated against the allowed values for that key. For example, if the user tries to set acks=2, an InvalidRequest error code will be sent back. The client will also have to validate dynamic configs against user-provided configs, so the broker is only doing partial validation here. This is worth doing since partially validated configs may only be invalid for a subset of clients, whereas acks=2 would be invalid for all clients.
The same authorization that is necessary for {Describe,Alter}ClientQuotas
, CLUSTER
authorization, will be used when handling {Describe,Alter}ClientConfigsRequest
.
Producer Changes
The Java producer will have a DynamicProducerConfig
that will periodically fetch dynamic configs from the producer’s IO thread asynchronously. The interval on which dynamic configs are fetched will be the same amount of time as the interval for MetadataRequest, metadata.max.age.ms
. It will use DescribeClientConfigsRequest
as the RPC, validate the dynamic configs returned in DescribeConfigsResponse
against the user provided configs, and log any configurations that are accepted. The client will reconfigure its acks value by using a method in DynamicProducerConfig
that gets the current value of acks
. The dynamic acks
config will take precedence over user provided acks
config unless the user provided configs require acks
to be a certain value, such as enable.idempotence=true
. In this case the dynamic update will be ignored.
Consumer Changes
The GroupCoordinator
in the broker receives a group member’s session timeout upon the JoinGroupRequest
and stores this with the rest of the group member's metadata. This means that to dynamically configure a consumer’s session timeout, the consumer must send a JoinGroupRequest
. Currently, this could trigger an expensive rebalance operation when members are stable. To get around this, JoinGroup behavior will be changed in the broker so that the session timeout can be updated using JoinGroup without triggering a rebalance in stable group members. The Java consumer's initial DescribeClientConfigsRequest
will still be done synchronously before the first JoinGroupRequest to avoid sending an unnecessary JoinGroupRequest.
The Java consumer will have a DynamicConsumerConfig
that will periodically fetch dynamic configs. The interval on which dynamic configs are fetched will be the same amount of time as the interval for MetadataRequest, metadata.max.age.ms
. It will use DescribeConfigsRequest
as the RPC, validate the dynamic configs that are returned in DescribeConfigsResponse
against the user provided configs and log any configurations that are accepted. The client will either reconfigure itself by changing the session timeout and heartbeat interval in the GroupRebalanceConfig,
or discard the configs if the heartbeat interval is greater than or equal to the session timeout. The dynamic configs will take precedence over user provided client configs as long as the heartbeat interval is strictly less than the session timeout.
Command Line Changes
kafka-configs.sh
will be extended to support the client configurations listed at the beginning of this KIP. The same entity types that are used for client quotas, users and clients
, will be used for dynamic client configuration.
For example, the user can add the new configs supported with this KIP along with the quota configs that are supported for the admin client in KIP-546 to their default dynamic config. In this example the user mixes some dynamic client configs that this KIP introduces with the quota config producer_byte_rate
:
The name of the entity, or null if the default." }
]}
]}
]
}
|
Proposed Changes
...
Admin Client Changes
Admin client calls will be added to support {Describe, Alter}ClientConfigs.
Broker Changes
If a {Describe, Alter}ClientConfigsRequest
is made without a user component, an InvalidRequest error code will be returned to the client. Apart from this, when the EntityRequest field is not set to true, the mechanics of the <user, client-id> or user config entity descriptions are very similar to the mechanics outlined in KIP-546. This is because the bulk of the code in the brokers that handles fetching client quota entity configs from zookeeper can be reused for dynamic client configs.
Default dynamic client configs will be stored in the children of the znode /config/users, while client-id specific dynamic client configs will be stored in the children of /config/users/<user>/clients.
The user config is updated when the client-id component is missing from an AlterClientConfigsRequest
. The <user, client-id> config is updated otherwise.
When the broker handles a DescribeClientConfigsRequest
that a client is making for it's own dynamic configs (e.g. ResolveEntity field set to true), the user config and the <user, client-id> config will be returned as one entity whose configs are resolved with the following order of precedence from most precedent to least precedent:
/config/users/<user>/clients/<client-id>
/config/users/<user>
For example, any config key value pairs found in /config/users/<user>/clients/<client-id>
will override any config key value pairs found in /config/users/<user>
. The final resolved map of configs will then be sent back to the client and will overwrite statically provided client configs.
Client quotas are stored in these znodes as well. However, all configs that are not quota configs are filtered out when constructing a DescribeClientQuotasResponse
. Similar to this, all configs that are not dynamic client configs will be filtered out when constructing a DescribeClientConfigsResponse
. The value for each key will also be validated against the allowed values for that key. For example, if the user tries to set acks=2, an InvalidRequest error code will be sent back. The client will also have to validate dynamic configs against user-provided configs, so the broker is only doing partial validation here. This is worth doing since partially validated configs may only be invalid for a subset of clients, whereas acks=2 would be invalid for all clients.
The same authorization that is necessary for {Describe,Alter}ClientQuotas
, CLUSTER
authorization, will be used when handling {Describe,Alter}ClientConfigsRequest
.
Producer Changes
The Java producer will have a DynamicProducerConfig
that will periodically fetch dynamic configs from the producer’s IO thread asynchronously. The interval on which dynamic configs are fetched will be the same amount of time as the interval for MetadataRequest, metadata.max.age.ms
. It will use DescribeClientConfigsRequest
as the RPC, validate the dynamic configs returned in DescribeConfigsResponse
against the user provided configs, and log any configurations that are accepted. The client will reconfigure its acks value by using a method in DynamicProducerConfig
that gets the current value of acks
. The dynamic acks
config will take precedence over user provided acks
config unless the user provided configs require acks
to be a certain value, such as enable.idempotence=true
. In this case the dynamic update will be ignored.
Consumer Changes
The GroupCoordinator
in the broker receives a group member’s session timeout upon the JoinGroupRequest
and stores this with the rest of the group member's metadata. This means that to dynamically configure a consumer’s session timeout, the consumer must send a JoinGroupRequest
. Currently, this could trigger an expensive rebalance operation when members are stable. JoinGroup behavior will be changed so that the session timeout can be updated using JoinGroup without triggering a rebalance in stable group members. The Java consumer's initial DescribeClientConfigsRequest
will still be done synchronously before the first JoinGroupRequest to avoid sending an unnecessary JoinGroupRequest.
The Java consumer will have a DynamicConsumerConfig
that will periodically fetch dynamic configs. The interval on which dynamic configs are fetched will be the same amount of time as the interval for MetadataRequest, metadata.max.age.ms
. It will use DescribeConfigsRequest
as the RPC, validate the dynamic configs that are returned in DescribeConfigsResponse
against the user provided configs and log any configurations that are accepted. The client will either reconfigure itself by changing the session timeout and heartbeat interval in the GroupRebalanceConfig,
or discard the configs if the heartbeat interval is greater than or equal to the session timeout. The dynamic configs will take precedence over user provided client configs as long as the heartbeat interval is strictly less than the session timeout.
Command Line Changes
kafka-configs.sh
will be extended to support the client configurations listed at the beginning of this KIP. The same entity types that are used for client quotas, users and clients
, will be used for dynamic client configuration.
For example, the user can add the new configs supported with this KIP along with the quota configs that are supported for the admin client in KIP-546 to their default dynamic config. In this example the user mixes some dynamic client configs that this KIP introduces with the quota config producer_byte_rate
:
Code Block | ||
---|---|---|
| ||
bin/kafka-configs.sh --bootstrap-server localhost:9092 \
--alter \
--entity-type users \
--entity-name alice \
--add-config acks=-1,session.timeout.ms=11000,producer_byte_rate=50000
Completed updating config for user alice. |
The user can also add configs specific to a client-id that will override the user's default dynamic configs:
Code Block | ||
---|---|---|
| ||
bin/kafka-configs.sh --bootstrap-server localhost:9092 \
--alter \
--entity-type users \
--entity-name alice \
--entity-type clients \
--entity-name clientid-override \
--add-config acks=0,heartbeat.interval.ms=2000,producer_byte_rate=60000
Completed updating config for user alice. |
The user can describe these configs the same way that client quotas are described with the users and clients
entity types. To make this possible, kafka-configs.sh will be sending a DescribeClientConfigsRequest
as well as the DescribeClientQuotasRequest. Dynamic client configs must at least be scoped by a user:
Code Block | ||
---|---|---|
bin/kafka-configs | ||
Code Block | ||
| ||
bin/kafka-configs.sh --bootstrap-server localhost:9092 \ --alterdescribe \ --entity-type users \ --entity-name alice Quota \ configs for user--add-config acks=-1,session.timeout.ms=11000,principal 'alice' are producer_byte_rate=50000.0 Dynamic Completed updating config configs for user-principal 'alice' are session.timeout.ms=11000, acks=-1 |
They may optionally be scoped by The user can also add configs specific to a client-id that will override the user's default dynamic configs:
Code Block | ||
---|---|---|
| ||
bin/kafka-configs.sh --bootstrap-server localhost:9092 \ --alterdescribe \ --entity-type users \ --entity-name alice \ --entity-type clients \ --entity-name clientid-override \ Quota --add-config acks=0,heartbeat.interval.ms=2000,configs for user-principal 'alice', client-id 'clientid-override' are producer_byte_rate=60000.0 Dynamic Completed updating config configs for user-principal alice.'alice', client-id 'clientid-override' are heartbeat.interval.ms=2000, acks=0 |
If a client-id is not specified when describing, all of the <user, client-id> entity configs will be returnedThe user can describe these configs the same way that client quotas are described with the users and clients
entity types. To make this possible, kafka-configs.sh will be sending a DescribeClientConfigsRequest
as well as the DescribeClientQuotasRequest. Dynamic client configs must at least be scoped by a user:
Code Block |
---|
bin/kafka-configs.sh --bootstrap-server localhost:9092 \ --describe \ --entity-type users \ --entity-name alice \ --entity-type clients Quota configs for user-principal 'alice', are producerclient-id 'clientid-override' are producer_byte_rate=5000060000.0 Dynamic configs for user-principal 'alice', client-id 'clientid-override' are sessionheartbeat.timeoutinterval.ms=11000,=2000, acks=0 Dynamic configs for user-principal 'alice', client-id '""' are acks=-1 |
They may optionally be scoped by a client-id:
Code Block | ||
---|---|---|
| ||
bin/kafka-configs.sh --bootstrap-server localhost:9092 \
--describe \
--entity-type users \
--entity-name alice \
--entity-type clients \
--entity-name clientid-override
Quota configs for user-principal 'alice', client-id 'clientid-override' are producer_byte_rate=60000.0
Dynamic configs for user-principal 'alice', client-id 'clientid-override' are heartbeat.interval.ms=2000, acks=0,
Supported dynamic configs for user-principal 'alice', client-id 'clientid-override' are "{'ClientInformation(softwareName=apache-kafka-java, softwareVersion=x.y.z-SNAPSHOT)': 'acks'}" |
The above output is under the assumption that a client with the ClientInformation above registered the supported dynamic configs acks under the entity <alice, clientid-override>.
If an entity name is not specified when describing, all child entities of the entity type will be returned.
The default dynamic config will be used in the case that the client-id dynamic config does not contain a key that the default does contain, but only if the client is requesting configs with the ResolveEntity flag set to true.
Any number of the configs that this KIP provides dynamic support for can be added or deleted with --add-config
and --delete-config
. They may optionally be mixed with quotas in the same command.
Compatibility, Deprecation, and Migration Plan
If a new client with this feature attempts to send a
DescribeClientConfigsRequest
to an old broker, the broker will send back anInvalidRequest
error code and the client will disable this feature.In the case that an old client is talking to a new broker, nothing will change since the old client will never send a DescribeClientConfigsRequest.
In the case that both the broker and client are up to date with this change, the client will take advantage of the feature.
- Clients will register their dynamic configs upon starting up through the initial DescribeClientConfigsRequest. This registration will be tied to <user, client-id> by adding the config supported.config to the entity config. The value of this config will be a JSON that maps software names and versions to the list of supported configs for that software name and version. The user will be able to refresh this compatibility information by deleting the config.
Rejected Alternatives
The default dynamic config will be used in the case that the client-id dynamic config does not contain a key that the default does contain, but only if the client is requesting configs with the ResolveEntity flag set to true.
Any number of the configs that this KIP provides dynamic support for can be added or deleted with --add-config
and --delete-config
. They may optionally be mixed with quotas in the same command.
Compatibility, Deprecation, and Migration Plan
...
If a new client with this feature attempts to send a
DescribeClientConfigsRequest
to an old broker, the broker will send back anInvalidRequest
error code and the client will disable this feature.In the case that an old client is talking to a new broker, nothing will change since the old client will never send a DescribeClientConfigsRequest.
In the case that both the broker and client are up to date with this change, the client will take advantage of the feature.
- The Java producers and consumers will register a list of configs that they support. This will be stored as the value of the dynamic config ‘supported.configs’ and can be returned to the user. If a new client registers with an entity the old value of this config will be overwritten.
Rejected Alternatives
...
Introducing new entity types for
kafka-configs.sh
that producers and consumers can associate themselves with. This would make the tool more cumbersome to use and it is most intuitive that client configurations be dynamically altered with theclients and users
entity types.- Use the {Describe, IncrementalAlter}Configs APIs. Client config entities are more dynamic than entities with a singular resource name and type which makes it hard to fit them into generic APIs that expect a distinct entity name and type.
- Use the <user/client-id> hierarchy implemented for client quotas in KIP-55 and extended for the admin client in KIP-546. Quotas are inherently hierarchical but client configs are not, so it seems reasonable to use a hierarchy of shallow depth for dynamic client configs.
Making client config compatibility information available to the user
The user should be able to see what dynamic configs are supported for each application. However, clients that are using the same <user, client-id> entity may not necessarily support the same dynamic configs, storing a list of supported configs alongs side quotas and configs is a flawed solution.
A better solution is to store config registrations in an internal topic. The Java producer and consumer clients can register the configs that they support with a DescribeClientConfigsRequest. The broker can write a key-value pair to an internal topic upon receiving the request where the key is the <user, client-id> entity and the value is ClientVersion along with the list of supported configs.
All versions of clients that registered with a <user, client-id> entity along with the supported configs for each version of client could be aggregated when a DescribeClientConfigsRequest from an admin client is received. This information would then be returned to the admin client in the
DescribeClientConfigsResponse
. For example, supported dynamic configs for user-principal 'alice', client-id 'clientid-override' are "{ 'ClientInformation(softwareName=apache-kafka-java, softwareVersion=x.y.a-SNAPSHOT)': 'acks', 'ClientInformation(softwareName=apache-kafka-java, softwareVersion=x.y.b-SNAPSHOT)': 'acks, enable.idempotence' }".- Interesting hierarchies for config overrides could be constructed if the Java producer and consumer resolved the dynamic configs instead of the broker. For example, from most precedent to least precedent:
- /config/users/<user>/clients/<client-id>
- .properties file configs
- /config/users/<user>
- Static default configs defined in
ProducerConfig
andConsumerConfig
Introducing new entity types for
kafka-configs.sh
that producers and consumers can associate themselves with. This would make the tool more cumbersome to use and it is most intuitive that client configurations be dynamically altered with theclients and users
entity types.- Use the {Describe, IncrementalAlter}Configs APIs. Client config entities are more dynamic than entities with a singular resource name and type which makes it hard to fit them into generic APIs that expect a distinct entity name and type.
- Use the <user/client-id> hierarchy implemented for client quotas in KIP-55 and extended for the admin client in KIP-546. Quota APIs are different and quotas are inherently hierarchical, so it seems reasonable to use a hierarchy of shallow depth for dynamic client configs
- .
- Adding a config enable.dynamic.config to producers and consumers to enable the feature. Adding the dynamic config supported.configs is a better alternative since the user doesn't have to remember what types of clients support the capability but instead can just see which entities have clients that are registered along with the configs that are supported for each software name and versionThis defaulted to true anyway so it was removed.
Making certain client configurations topic level configurations on the broker.
The semantic for the ProduceRequest API would be undefined since the producer would not receive a response with an offset for the ProduceRequests with
acks=0
.If this were implemented for
acks
there would also be quite a bit of overhead associated with extra round trips since the RecordAccumulator sends batches that may contain records from multiple topics. If these topics have differentacks
configurations the records would need to be sent in different batches based on theacks
value.For example, if a producer is consistently producing to 2 different topics and one is configured as
acks=0
while the other isacks=-1
. This would require twice the amount of round trips to produce the same number of messages.