Using the Java Messaging System
CXF provides a transport plug-in that enables endpoints to use Java Messaging System (JMS) queues and topics. CXF's JMS transport plug-in uses the Java Naming and Directory Interface (JNDI) to locate and obtain references to the JMS provider that brokers for the JMS destinations. Once CXF has established a connection to a JMS provider, CXF supports the passing of messages packaged as either a JMS ObjectMessage
or a JMS TextMessage
.
JMS Namespaces
WSDL Namespace
The WSDL extensions for defining a JMS endpoint are defined in the namespace http://cxf.apache.org/transports/jms
. In order to use the JMS extensions you will need to add the line shown below to the definitions element of your contract.
xmlns:jms="http://cxf.apache.org/transports/jms"
Configuration Namespaces
The CXF JMS endpoint configuration properties are specified under two namespaces:
http://cxf.apache.org/transports/jmscontains
the elements used to define the basic JMS port configuration.http://cxf.apache.org/transports/jms/jms-conf
contains element used for configuring the runtime components of the JMS transport.
In order to use the JMS configuration properties you will need to add the lines shown below to the beans
element of your configuration.
xmlns:jms="http://cxf.apache.org/transports/jms" xmlns:jms-conf="http://cxf.apache.org/transports/jms/jms-conf"
Basic Endpoint Configuration
JMS endpoints need to know certain basic information about how to establish a connection to the proper destination. This information can be provided in one of two places:
- WSDL
- Configuratoin
Using WSDL
The JMS destination information is provided using the jms:address
element and its child, the jms:JMSNamingProperties
element. The jms:address
element's attributes specify the information needed to identify the JMS broker and the destination. The jms:JMSNamingProperties
element specifies the Java properties used to connect to the JNDI service.
The address element
The basic configuration for a JMS endpoint is done by using a jms:address
element as the child of your service's port
element. The jms:address
element uses the attributes described below to configure the connection to the JMS broker.
Attribute |
Description |
---|---|
|
Specifies if the JMS destination is a JMS queue or a JMS topic. |
|
Specifies the JNDI name bound to the JMS connection factory to use when connecting to the JMS destination. |
|
Specifies the JNDI name bound to the JMS destination to which requests are sent. |
|
Specifies the JNDI name bound to the JMS destinations where replies are sent. This attribute allows you to use a user defined destination for replies. |
|
Specifies the username to use when connecting to a JMS broker. |
|
Specifies the password to use when connecting to a JMS broker. |
The JMSNamingProperties element
To increase interoperability with JMS and JNDI providers, the jms:address
element has a child element, jms:JMSNamingProperties
, that allows you to specify the values used to populate the properties used when connecting to the JNDI provider. The jms:JMSNamingProperties
element has two attributes: name
and value
. The name
attribute specifies the name of the property to set. The value
attribute specifies the value for the specified property. The jms:JMSNamingProperties
element can also be used for specification of provider specific properties.
The following is a list of common JNDI properties that can be set:
java.naming.factory.initial
java.naming.provider.url
java.naming.factory.object
java.naming.factory.state
java.naming.factory.url.pkgs
java.naming.dns.url
java.naming.authoritative
java.naming.batchsize
java.naming.referral
java.naming.security.protocol
java.naming.security.authentication
java.naming.security.principal
java.naming.security.credentials
java.naming.language
java.naming.applet
For more details on what information to use in these attributes, check your JNDI provider's documentation and consult the Java API reference material.
Using a named reply destination
By default, CXF endpoints using JMS create a temporary queue for sending replies back and forth. You can change this behavior by setting the jndiReplyDestinationName
attribute in the endpoint's contract. A client endpoint will listen for replies on the specified destination and it will specify the value of the attribute in the ReplyTo
field of all outgoing requests. A service endpoint will use the value of the jndiReplyDestinationName
attribute as the location for placing replies if there is no destination specified in the request's ReplyTo
field.
The following example shows an example of a JMS WSDL port specification.
<service name="JMSService"> <port binding="tns:Greeter_SOAPBinding" name="SoapPort"> <jms:address jndiConnectionFactoryName="ConnectionFactory" jndiDestinationName="dynamicQueues/test.Celtix.jmstransport"> <jms:JMSNamingProperty name="java.naming.factory.initial" value="org.activemq.jndi.ActiveMQInitialContextFactory" /> <jms:JMSNamingProperty name="java.naming.provider.url" value="tcp://localhost:61616" /> </jms:address> </port> </service>
Using Configuration
In addition to using the WSDL file to specify the connection information for a JMS endpoint, you can supply it in the endpoint's configuration file. The information in the configuration file will override the information in the endpoint's WSDL file.
Configuration beans
You use the org.apache.cxf.transport.jms.base.JMSTransportBaseConfigBean
bean class to specify the address for a JMS endpoint. The value if the configuration bean's id
attribute determines if you are configuring a consumer endpoint or a service endpoint. The id
values will take one of the following forms:
- {
WSDLNamespace}WSDLPortName.jms-conduit-base
specifies that a consumer endpoint is being configured - {
WSDLNamespace}WSDLPortName.jms-destination-base
specifies that a service endpoint is being configured
The addressPolicy property
JMS connection information is specified using the addressPolicy
property. The addressPolicy
property has a single value: jms:address
. It is identical to the jms:address
element used in the WSDL file.
Like the jms:address
element in the WSDL file, the jms:address
configuration element also has a jms:JMSNamingProperties
child element that is used to specify additional information used to connect to a JNDI provider.
The addressPolicy
property can be specified in either the client base configuration bean or the service base configuration bean.
The following example shows a CXF configuration entry for configuring the addressing information for a JMS consumer endpoint.
<beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ct="http://cxf.apache.org/configuration/types" xmlns:jms="http://cxf.apache.org/transports/jms" xmlns:jms-conf="http://cxf.apache.org/transports/jms/jms-conf" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd"> <bean id="{http://cxf.apache.org/jms_endpt}HelloWorldJMSPort.jms-conduit-base" class="org.apache.cxf.transport.jms.base.JMSTransportBaseConfigBean"> <property name="addressPolicy"> <value> <jms:address destinationStyle="queue" jndiConnectionFactoryName="myConnectionFactory" jndiDestinationName="myDestination" jndiReplyDestinationName="myReplyDestination" connectionUserName="testUser" connectionPassword="testPassword"> <jms:JMSNamingProperty name="java.naming.factory.initial" value="org.apache.cxf.transport.jms.MyInitialContextFactory"/> <jms:JMSNamingProperty name="java.naming.provider.url" value="tcp://localhost:61616"/> </jms:address> </value> </property> </bean> </beans>
Consumer Endpoint Configuration
JMS consumer endpoints specify the type of messages they use. JMS consumer endpoint can use either a JMS ObjectMessage
or a JMS TextMessage
. When using an ObjectMessage
the consumer endpoint uses a byte[]
as the method for storing data into and retrieving data from the JMS message body. When messages are sent, the message data, including any formating information, is packaged into a byte[]
and placed into the JMS message body before it is placed on the wire. When messages are received, the consumer endpoint will attempt to unmarshall the data stored in the JMS body as if it were packed in a byte[]
.
When using a TextMessage
, the consumer endpoint uses a string as the method for storing and retrieving data from the JMS message body. When messages are sent, the message information, including any format-specific information, is converted into a string and placed into the JMS message body. When messages are received the consumer endpoint will attempt to unmashall the data stored in the JMS message body as if it were packed into a string.
When native JMS applications interact with CXF consumers, the JMS application is responsible for interpreting the message and the formatting information. For example, if the CXF contract specifies that the binding used for a JMS endpoint is SOAP, and the messages are packaged as TextMessage
, the receiving JMS application will get a text message containing all of the SOAP envelope information.
Consumer endpoint can be configured in one of two ways:
- Configuration
- WSDL
Using Configuration
Specifying the message type
Consumer endpoint configuration is specified using org.apache.cxf.transport.jms.conduit.JMSConduitConfigBean
as the class for the configuration bean. Using this configuration bean, you specify the message type supported by the consumer endpoint using the client property. It has a single value, jms:client
, that has a single attribute:
messageType
– Specifies how the message data will be packaged as a JMS message.text
specifies that the data will be packaged as aTextMessage
.binary
specifies that the data will be packaged as anObjectMessage
.
The following example shows a configuration entry for configuring a JMS consumer endpoint.
<beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ct="http://cxf.apache.org/configuration/types" xmlns:jms="http://cxf.apache.org/transports/jms" xmlns:jms-conf="http://cxf.apache.org/transports/jms/jms-conf" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd"> ... <bean id="{http://cxf.apache.org/jms_endpt}HelloWorldJMSPort.jms-conduit" class="org.apache.cxf.transport.jms.conduit.JMSConduitConfigBean"> <property name="client"> <value> <jms:client messageType="binary"/> </value> </property> ... </bean> ... </beans>
Specifying address information
The addressing information for a JMS consumer endpoint is set using a configuration bean with a class of org.apache.cxf.transort.jms.base.JMSTransportBaseConfigBean
and an id in the form of {WSDLNamespace}WSDLPortName.jms-conduit-base
.
Using WSDL
The type of messages accepted by a JMS consumer endpoint is configured using the optional jms:client
element. The jms:client
element is a child of the WSDL port element and has one attribute:
messageType
– Specifies how the message data will be packaged as a JMS message.text
specifies that the data will be packaged as aTextMessage
.binary
specifies that the data will be packaged as an ObjectMessage.
Service Endpoint Configuration
JMS service endpoints have a number of behaviors that are configurable in the contract. These include:
- how messages are correlated
- the use of durable subscriptions
- if the service uses local JMS transactions
- the message selectors used by the endpoint
Service endpoints can be configure in one of two ways:
- Configuration
- WSDL
Using Configuration
Specifying configuration data
S e r v i c e e n d p o i n t c o n fi g u r a t i o n i s s p e c i fied using the
org.apache.cxf.transport.jms.destination.JMSDestinationConfigBean class
for the configuration bean. Using this configuration bean class, you can specify the service endpoint's
behaviors using the server property. It has a single element, jms:server, that has a the following
attributes:
7
Using the Java Messaging System
Table 1.4. JMS Service Endpoint Configuration
Attribute Description
Specifies whether the JMS broker will use the message ID to
correlate messages. The default is false.
useMessageIDAsCorrealationID
durableSubscriberName Specifies the name used to register a durable subscription.
Specifies the string value of a message selector to use. For
more information on the syntax used to specify message
selectors, see the JMS 1.1 specification.
messageSelector
Specifies whether the local JMS broker will create transactions
around message processing. The default is false. Currently,
this is not supported by the runtime.
transactional
Example
Example 1.6, "Configuration for a JMS Service Endpoint" shows a Celtix Enterprise configuration entry
for configuring a JMS service endpoint.
Example 1.6. Configuration for a JMS Service Endpoint
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ct="http://cxf.apache.org/configuration/types"
xmlns:jms="http://cxf.apache.org/transports/jms"
xmlns:jms-conf="http://cxf.apache.org/transports/jms/jms-conf"
xsi:schemaLocation="http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans.xsd">
...
<bean id="
HelloWorldJMSPort.jms-destination"
class="org.apache.cxf.transport.jms.destination.JMSDestinationConfigBean">
<property name="server">
<value>
<jms:server messageSelector="cxf_message_selector"
useMessageIDAsCorrelationID="true"
transactional="true"
durableSubscriberName="cxf_subscriber" />
</value>
</property>
</bean>
...
</beans>
Adding address information
The addressing information for a JMS service endpoint is set using a configuration bean with a class of
org.apache.cxf.transort.jms.base.JMSTransportBaseConfigBean and an id in the
form of
WSDLPortName.jms-destination-base. See the section called
"Using Configuration".
8
Using the Java Messaging System
Using WSDL
Service endpoint behaviors are configured using the optional jms:server element. The jms:server
element is a child of the WSDL port element and has the following attributes:
Table 1.5. JMS Service Endpoint WSDL Extensions
Attribute Description
Specifies whether JMS will use the message ID to correlate
messages. The default is false.
useMessageIDAsCorrealationID
durableSubscriberName Specifies the name used to register a durable subscription.
Specifies the string value of a message selector to use. For
more information on the syntax used to specify message
selectors, see the JMS 1.1 specification.
messageSelector
Specifies whether the local JMS broker will create transactions
around message processing. The default is false. Currently,
this is not supported by the runtime.
transactional
JMS Runtime Configuration
In addition to configuring the externally visible aspects of your JMS endpoint, you can also configure
aspects of its internal runtime behavior. There are three types of runtime configuration:
• Base configuration
• Consumer specific configuration
• Service specific configuration
Base Runtime Configuration
The JMS base configuration allows you to specify the number of JMS sessions an endpoint will keep in a
pool. This property is specified using the same configuration bean as the endpoint's address configuration.
Configuration bean
You use the org.apache.cxf.transport.jms.base.JMSTransportBaseConfigBean
bean class to specify the session pool configuration for a JMS endpoint. The value if the configuration
bean's id attribute determines if you are configuring a consumer endpoint or a service endpoint. The id
values will take one of the following forms:
•
WSDLPortName.jms-conduit-base specifies that a consumer endpoint
is being configured.
•
WSDLPortName.jms-destination-base specifies that a service endpoint
is being configured.
Session pool configuration
You configure an endpoint's JMS session pool using the sessionPoolConfig property. This property allows
you to set a high and low water mark for the number of JMS sessions an endpoint will keep pooled. The
9
Using the Java Messaging System
endpoint is garunteed to maintain a pool of sessions equal to the low water mark and to never pool more
sessions than specified by the high water mark.
The sessionPoolConfig property takes a single jms-conf:sessionPoolConfig element. The
jms-conf:sessionPoolConfig element's attributes, listed in Table 1.6, "Attributes for Configuring
the JMS Session Pool", specify the high and low water marks for the endpoint's JMS session pool.
Table 1.6. Attributes for Configuring the JMS Session Pool
Attribute Description
Specifies the minimum number of JMS sessions pooled by the endpoint. The default
is 20.
lowWaterMark
Specifies the maximum number of JMS sessions pooled by the endpoint. The default
is 500.
highWaterMark
Example
Example 1.7, "JMS Session Pool Configuration" shows an example of configuring the session pool for a
Celtix Enterprise JMS service endpoint.
Example 1.7. JMS Session Pool Configuration
<bean
id="
HelloWorldJMSPort.jms-destination-base"
class="org.apache.cxf.transport.jms.base.JMSTransportBaseConfigBean">
...
<property name="sessionPoolConfig">
<value>
<jms-conf:sessionPoolConfig lowWaterMark="10"
highWaterMark="5000" />
</value>
</property>
</bean>
Consumer Specific Runtime Configuration
The JMS consumer configuration allows you to specify two runtime behaviors:
• the number of milliseconds the consumer will wait for a response.
• the number of milliseconds a request will exist before the JMS broker can remove it.
Configuration bean
You confi g u r e c o n s u m e r r u n t i m e b e h av i o r u s i n g t h e
org.apache.cxf.transport.jms.conduit.JMSConduitConfigBean.
Note
This is the same configuration bean that is used to configure the message type used by a JMS
consumer endpoint.
10
Using the Java Messaging System
Configuration property
You use the clientConfig property to set JMS consumer runtime behavior. This property has a single
element called jms-conf:clientConfig. This element's attributes, listed in Table 1.7, "JMS Consumer
Runtime Configuration Attributes", specify the configuration values for consumer runtime behavior.
Table 1.7. JMS Consumer Runtime Configuration Attributes
Attribute Description
Specifies the amount of time, in milliseconds, that the endpoint will wait
for a response before it timesout and issues an exception. The default value
is 2000.
clientReceiveTimeout
Specifies the amount of time, in milliseconds, that a request can remain
unrecieved before the JMS broker can delete it. The default value is 0
which specifies that the message can never be deleted.
messageTimeToLive
Example
Example 1.8, "JMS Consumer Endpoint Runtime Configuration" shows a configuraiton fragment that sets
the consumer endpoint's request lifetime to 500 milliseconds and its timeout value to 500 milliseconds.
Example 1.8. JMS Consumer Endpoint Runtime Configuration
<bean id="
HelloWorldJMSPort.jms-conduit"
class="org.apache.cxf.transport.jms.conduit.JMSConduitConfigBean">
...
<property name="clientConfig">
<value>
<jms-conf:clientConfig clientReceiveTimeout="500"
messageTimeToLive="500" />
</value>
</property>
</bean>
Service Specific Runtime Configuration
The JMS service configuration allows you to specify to runtime behaviors:
• the amount of time a response message can remain unreceived be fore the JMS broker can delete it.
• the client identifier used when creating and accessing durable subscriptions.
Configuration bean
You configure JMS service runtime behavior using the
org.apache.cxf.transport.jms.destination.JMSDestinationConfigBean.
Note
This is the same configuration bean that is used to configure the endpoint properties of a JMS
service endpoint.
11
Using the Java Messaging System
Configuration property
The serverConfig property is used to specify the service runtime configuration. It takes a single
jms-conf:serverConfig element. This element's attributes, listed in Table 1.8, "JMS Service Runtime
Configuration Attributes", specify the configuration values that control the service's runtime behavior.
Table 1.8. JMS Service Runtime Configuration Attributes
Attribute Description
Specifies the amount of time, in milliseconds, that a response
can remain unread before the JMS broker is allowed to delete
it. The default is 0 which specifies that the message can live
forever.
messageTimeToLive
Specifies the client identifier the endpoint uses to create and
access durable subscriptions.
durableSubscriptionClientId
Example
Example 1.9, "JMS Service Endpoint Runtime Configuration" shows a configuration fragment that sets
the service endpoint's response lifetime to 500 milliseconds and its durable subscription client identifier
to jms-test-id.
<bean id="{http://cxf.apache.org/jms_endpt}HelloWorldJMSPort.jms-destination" class="org.apache.cxf.transport.jms.destination.JMSDestinationConfigBean"> ... <property name="serverConfig"> <value> <jms-conf:serverConfig messageTimeToLive="500" durableSubscriptionClientId="jms-test-id" /> </value> </property> </bean>