• Created by Unknown User (alena1108), last updated on Apr 03, 2013 6 minute read

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 50 Next »

Introduction

This documents gives an overview to the design and functional implementation for Internal Load Balancing on VPC tiers.

Feature developers:

  • APIs and Business logic - Alena Prokharchyk
  • Backend - TBA
  • UI - TBA

Glossary

  • Internal LB - the load balancing between internal (guest) cloudStack networks
  • Internal LB Rule- Load balancer rule with the front end IP from Internal (Guest) cloudStack network.
  • Internal LB VM - cloudStack system vm managing internal LB Rules

Use case

There are 2 tiers in the VPC - Web tier and Application tier. Traffic to Web tier is balanced on the VPC VR on the public side. User wants traffic coming from Web to the App tier to be balanced as well. Load balancing on the App tier will be covered by the Internal LB feature.

Internal LB can be handled by 2 network providers:

  • InternalLBVm - have to add support for this provider first.
  • Netscaler VPX

The pic below is for the case when InternalLBVm is used as a provider for the LB service on internal tier:

  1. Public LB rule for 72.52.125.10 Public IP, public port 80 and private port 81. It enables LB for traffic coming from the internet to the vms on the Web tier. The LB rule is configured on the VPC VR.
  2. Internal LB rule #1 for 10.10.10.4 guest IP, loadBalancerPort 23 and instancePort 25. The LB rule is configured on InternalLBVM1.
  3. Internal LB rule #2 for 10.10.10.4 guest IP, loadBalancerPort 45 and instancePort 46. The LB rule is configured on InternalLBVM1.
  4. Internal LB rule #3 for 10.10.10.6 guest IP, loadBalancerPort 23 and instancePort 25. The LB rule is configured on InternalLBVM2.

General flow

1) Enable Internal LB on VPC tier

In order to have Internal Load Balancing support on VPC tier, the tier has to be created from the network offering with:

  • Service=LB, Provider=InternalLBVm.

or

  • Service=LB, Provider=Netscaler, LB service capability "scheme=Internal".
Java code changes
  • Network.java interface - add new capability for the LB service - supportedLbSchemes. It will have 2 values - Internal and Public.
  • Existing Netscaler Service Provider will support both values - Internal and Public - for the supportedLbSchemes capability as it can act as a provider for Public and Internal Load Balancing.
  • Introduce new Network Element - InternalLBVm. This provider supports only 1 service - LB, and its supportedLbMode capability can be Internal only. We need a new network element because Internal LB Vm will have different number of nics from the regular CS system vm (Guest and Control only); and its lifecycle will be different as well. The Vm will be started not when network gets implemented, but when the new IP gets acquired from the Guest Network for the Load Balancer rule.
  • Introduce InternalLBNetworkApplianceManager - for managing Internal Load Balancer vms. 

Backend changes

TBD. We might need a separate template/set of scripts for Internal LB VM, or we can re-use the existing VR template.

Web Services API

list/createNetworkOffering APIs will return new parameter in the response - "internal_lb". The parameter type is Boolean

DB changes

No changes

2) Create Load Balancer Rule 

Java code changes
  • Add new manager - InternalLoadBalancerManagerImpl (name is TBD). This class will be responsible for managing Internal LB rules.
  • The LBRule can be created with or without specifying the source IP address. If no source IP address is specified, the new one will get acquired automatically from the sourceIpNetworkId specified in createLoadBalancer command

If provider is InternalLBVM:

  • A new InternalLBVM should be spanned as soon as new source IP address is acquired by the LB rule. This code should be handled by InternalLBNetworkApplianceManager. See more details on the VM in "InternalLBVM management and life cycle" section.
  • There is going to be 1 Internal LB vm spanned per guest IP address participating in the Internal Load Balancing. If more rules are added for the same IP, they will be managed on the same InternalLBVM.

If LB provider is Netscaler VPX:

  • TBD
Backend changes

TBD. For InternalLBVM, have to put HA proxy management/configuration details here

Web Services API

In the current code Load Balancer and Load Balancing Rule concepts are mixed up. We always represent it as a LoadBalancingRule to the end user, and Load Balancing Rule contains information about the load balancer itself - source LB Ip, name; and the actual LB rule (sourcePort/instancePort/protocol combination). With the new changes we are going to change the way we represent the LB to the end user. Here are the key elements:

1) Load Balancer - the container for the load balancer rules. Has properties:

  • sourceIpAddress - the address to access the load balancer
  • name - unique LB name
  • algorithm

2) Load Balancer Listener - the listener inside the load balancer, listening for a specific source/instancePort. Has properties:

  • sourcePort - Specifies the Load Balancer port
  • instancePort - Specifies the TCP port on which the instance is listening

3) Load Balancer Instance 

VM instance registered inside the load balancer. Once the instance is a part of the load balancer, it starts receiving requests coming to the LB source Ip/Lb listener(s) source port(s)

New APIs

API Name

Request Parameters

Response parameters

Available to regular user

createLoadBalancer 

  • name (required, unique) - name of the LB
  • displayText (required) - display text of the LB
  • networkId (required) - the guest network id the Load Balancer belongs to. 
  • sourceIpAddressNetworkId (required) - 
  • sourceIpAddress (optional) - source IP address
  • scheme (required) - supported values Internal/Public
  • algorithm (required)
  • sourcePort (optional)
  • instancePort (optional)

LoadBalancer object:

  • id
  • name
  • displayText
  • networkId
  • sourceIpAddressNetworkId
  • sourceIpAddress
  • scheme
  • list of LoadBalancerListener objects
  • list of LoadBalancerInstance objects
    LoadBalancerListener object:
  • sourcePort
  • instancePort
    LoadBalancerInstance object:
  • instanceId
  • instanceName

yes

listLoadBalancers

  • id (required) - load balancer id
  • true/false

yes

listLoadBalancers

  • id
  • name
  • displayText
  • networkId
  • sourceIpAddressNetworkId
  • sourceIpAddress
  • scheme

list of LoadBalancer objects (see the structure in createLoadBalancer command description)

yes

createLoadBalancerListener

  • loadBalancerId
  • sourcePort (required)
  • instancePort (required)
  • protocol (required)
    The listener is uniquely identified in the load balancer by its source port

Returns the Load Balancer object with this just created listener attached. See the structure of LoadBalancer Object in createLoadBalancer command description

yes

deleteLoadBalancerListener

  • loadBalancerId(required) - the id of the LB where the listener belongs to
  • sourcePort(required) - the source port of the listener.
  • true/false

yes

attachInstancesToTheLoadBalancer

  • loadBalancerId (required) - the LB id where instance(s) is being attached to
  • instanceIds (required) - list of vm instance ids separated by coma

 

Returns the Load Balancer object where the instance got attached to. See the structure of LoadBalancer Object in createLoadBalancer command description


 

detachInstancesFromTheLoadBalancer

  • loadBalancerId (required) - the LB id where instance(s) is being detached from
  • instanceIds (required) - list of vm instance ids separated by coma
  • true/false

 

DB changes

TBD

How to list Guest IP addresses allocated for LB purpose

At the moment, cloudStack doesn't expose any API for listing IP addresses from the guest network. Adding a new one to serve this purpose:

API Name

Request Parameters

Response Parameters

Available to regular user

listIpAddresses

  • ipAddress
  • networkId
  • purpose

list of ip Addresses, each IP object having parameter:

  • ipAddress
  • networkId
  • purpose (can have value "LB" at this point)
  • state (Free/Allocated)

true

In 4.2 this API will return only Allocated IP addresses.

Internal Load Balancing Vm management and life cycle

1) The InternalLBVM will be created with 2 interfaces: eth0 - linkLocal (private in VMWare case), eth1 - the IP address of the LB rule.

3) InternalLBVM will be managed by InternalLBNetworkApplianceManager

2) InternalLBVM life cycle:

  • Create: InternalLBVM gets created when the first Load Balancing Rule is created for the IP address
  • Destroy: InternalLBVM gets destroyed when the last Load Balancer is removed for the IP address
  • Reboot: InternalLBVM can be rebooted as a regular system vm using RebootSystemVm API.
  • List: InternalLBVM can be listed with ListSystemVMs API

Limitations

  • Internal and Public Lb are mutually exclusive on a network/tier. If the tier has LB on the public side, then it can't have the Internal LB
  • Supported just on VPC networks in 4.2 release.

UI

TBD

  • No labels