You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 11 Next »

ServiceMix can be used as a protocol bridge. The following tutorial will explain how to create a JBI Service Assembly (aka a JBI application) to bridge two different protocols. In this example, we will bridge the HTTP/SOAP with the JMS protocol using an InOnly MEP. We will also put between the two protocols an XSLT transformation.
We will leverage ServiceMix archetypes and maven plugin (see Maven JBI plugin).

Identifying the service units

Our JBI SA (Service Assembly) will be composed of the following SUs (Service Units):

  • an HTTP+SOAP consumer
  • a pipeline to call the XSLT transformer and the JMS provider
  • an XSLT transformer
  • a JMS provider

Directory layout

We aim to have the following project structure:

bridge\
  pom.xml
  bridge-http-su\
    ...
  bridge-eip-su\
    ...
  bridge-xslt-su\
    ...
  bridge-jms-su\
    ...
  bridge-sa\
    ...

Creating the archetypes

In the bridge directory, run the following commands:

mvn archetype:create \
        -DarchetypeGroupId=org.apache.servicemix.tooling \
        -DarchetypeArtifactId=servicemix-http-consumer-service-unit \
        -DarchetypeVersion=1.0-incubating-SNAPSHOT \
        -DgroupId=org.apache.servicemix.samples.bridge \
        -DartifactId=bridge-http-su

mvn archetype:create \
        -DarchetypeGroupId=org.apache.servicemix.tooling \
        -DarchetypeArtifactId=servicemix-jms-provider-service-unit \
        -DarchetypeVersion=1.0-incubating-SNAPSHOT \
        -DgroupId=org.apache.servicemix.samples.bridge \
        -DartifactId=bridge-jms-su

mvn archetype:create \
        -DarchetypeGroupId=org.apache.servicemix.tooling \
        -DarchetypeArtifactId=servicemix-eip-service-unit \
        -DarchetypeVersion=1.0-incubating-SNAPSHOT \
        -DgroupId=org.apache.servicemix.samples.bridge \
        -DartifactId=bridge-eip-su

mvn archetype:create \
        -DarchetypeGroupId=org.apache.servicemix.tooling \
        -DarchetypeArtifactId=servicemix-lwcontainer-service-unit \
        -DarchetypeVersion=1.0-incubating-SNAPSHOT \
        -DgroupId=org.apache.servicemix.samples.bridge \
        -DartifactId=bridge-xslt-su

mvn archetype:create \
        -DarchetypeGroupId=org.apache.servicemix.tooling \
        -DarchetypeArtifactId=servicemix-service-assembly \
        -DarchetypeVersion=1.0-incubating-SNAPSHOT \
        -DgroupId=org.apache.servicemix.samples.bridge \
        -DartifactId=bridge-sa

Main pom

Now that we have created the SUs and SA structure, let's write the main pom:

<project>
  <modelVersion>4.0.0</modelVersion>
  <groupId>org.apache.servicemix.samples</groupId>
  <artifactId>bridge</artifactId>
  <version>1.0-SNAPSHOT</version>
  <packaging>pom</packaging>
  <modules>
    <module>bridge-http-su</module>
    <module>bridge-eip-su</module>
    <module>bridge-xslt-su</module>
    <module>bridge-jms-su</module>
    <module>bridge-sa</module>
  </modules>
</project>

Configure the Service Assembly

We want the Service Assembly to include the 4 SUs that we just created.
So let's edit the pom and change the dependencies to:

<dependencies>
  <dependency>
    <groupId>org.apache.servicemix.samples.bridge</groupId>
    <artifactId>bridge-http-su</artifactId>
    <version>1.0-SNAPSHOT</version>
  </dependency>
  <dependency>
    <groupId>org.apache.servicemix.samples.bridge</groupId>
    <artifactId>bridge-eip-su</artifactId>
    <version>1.0-SNAPSHOT</version>
  </dependency>
  <dependency>
    <groupId>org.apache.servicemix.samples.bridge</groupId>
    <artifactId>bridge-xslt-su</artifactId>
    <version>1.0-SNAPSHOT</version>
  </dependency>
  <dependency>
    <groupId>org.apache.servicemix.samples.bridge</groupId>
    <artifactId>bridge-jms-su</artifactId>
    <version>1.0-SNAPSHOT</version>
  </dependency>
</dependencies>

Now, we should be able to launch maven and have a the SA generated in the bridge-sa/target/ directory. You can check that by running the following command from the bridge/ directory:

mvn install

Of course, it won't work if you deploy it and we now need to fill the holes.

HTTP SU

We need to define a simple HTTP consumer endpoint in the http SU. As we do not use the request / response pattern, we will use an InOnly mep.

<?xml version="1.0"?>
<beans xmlns:http="http://servicemix.apache.org/http/1.0"
       xmlns:b="http://servicemix.apache.org/samples/bridge">

  <http:endpoint service="b:http"
                 endpoint="endpoint"
                 targetService="b:pipeline"
                 role="consumer"
                 locationURI="http://localhost:8192/bridge/"
                 defaultMep="http://www.w3.org/2004/08/wsdl/in-only" />

</beans>

EIP SU

The EIP SU contains the definition of the pipeline pattern, which can be used as a bridge between two InOnly MEPs and an InOut MEP. The XSLT transformer primary MEP is an InOut, as it will receive an incoming message, transform it, and send the answer back to the consumer. But in our case, the HTTP component and JMS component should send and receive an InOnly MEP, hence the need for the Pipeline.

<?xml version="1.0"?>
<beans xmlns:eip="http://servicemix.apache.org/eip/1.0"
       xmlns:b="http://servicemix.apache.org/samples/bridge">

  <eip:pipeline service="b:pipeline" endpoint="endpoint">
    <eip:transformer>
      <eip:exchange-target service="b:xslt" />
    </eip:transformer>
    <eip:target>
      <eip:exchange-target service="b:jms" />
    </eip:target>
  </eip:pipeline>

</beans>

XSLT SU

The XSLT transformation will be deployed on the servicemix-lwcontainer using the following servicemix.xml configuration file.

<?xml version="1.0"?>
<beans xmlns:sm="http://servicemix.apache.org/config/1.0"
       xmlns:b="http://servicemix.apache.org/samples/bridge">

  <classpath>
    <location>.</location>
    <location>lib/servicemix-components-3.0-incubating-SNAPSHOT.jar</location>
  </classpath>

  <sm:serviceunit id="jbi">
    <sm:activationSpecs>
      <sm:activationSpec service="b:xslt" endpoint="endpoint">
        <sm:component>
          <bean class="org.apache.servicemix.components.xslt.XsltComponent">
            <property name="xsltResource" value="classpath:bridge.xslt" />
          </bean>
        </sm:component>
      </sm:activationSpec>
    </sm:activationSpecs>
  </sm:serviceunit>

</beans>

Note the <classpath/> tag which defines the SU root directory as a component of the classpath. This is used by the xslt component to find the stylesheet using the spring "classpath:" URL style.

We need to create the bridge.xslt stylesheet and put in in the src/main/resources directory of this SU, along the servicemix.xml configuration file.
Let's use an identity stylesheet:

<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
  <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
  <xsl:template match="node() | @*">
    <xsl:copy>
      <xsl:apply-templates select="node() | @*"/>
    </xsl:copy>
  </xsl:template>
</xsl:stylesheet>

JMS SU

For the JMS provider, we will reuse the embedded ActiveMQ broker which is started with ServiceMix, and output the request in the bridge.output JMS queue.

<?xml version="1.0"?>
<beans xmlns:jms="http://servicemix.apache.org/jms/1.0"
       xmlns:b="http://servicemix.apache.org/samples/bridge">

  <jms:endpoint service="b:jms"
                endpoint="endpoint"
                role="provider"
                destinationStyle="queue"
                jmsProviderDestinationName="bridge.output"
                connectionFactory="#connectionFactory" />

  <bean id="connectionFactory" class="org.apache.activemq.ActiveMQConnectionFactory">
    <property name="brokerURL" value="vm://localhost" />
  </bean>

</beans>

Building, Deploying and Testing

To build the SUs and SA, run the following command in the bridge root directory:

mvn install

Then, deploy the SA and needed components to a started ServiceMix container:

cd bridge-sa
mvn jbi:projectDeploy
  • No labels