You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 127 Next »

Hive Data Definition Language

Overview

HiveQL DDL statements are documented here, including:

  • CREATE DATABASE/SCHEMA, TABLE, VIEW, FUNCTION, INDEX
  • DROP DATABASE/SCHEMA, TABLE, VIEW, INDEX
  • TRUNCATE TABLE
  • ALTER DATABASE/SCHEMA, TABLE, VIEW
  • MSCK REPAIR TABLE (or ALTER TABLE RECOVER PARTITIONS)
  • SHOW DATABASES/SCHEMAS, TABLES, TBLPROPERTIES, PARTITIONS, FUNCTIONS, INDEX[ES], COLUMNS, CREATE TABLE
  • DESCRIBE DATABASE, table_name, view_name

PARTITION statements are usually options of TABLE statements, except for SHOW PARTITIONS.

Create/Drop/Alter Database

Create Database

CREATE (DATABASE|SCHEMA) [IF NOT EXISTS] database_name
  [COMMENT database_comment]
  [LOCATION hdfs_path]
  [WITH DBPROPERTIES (property_name=property_value, ...)];

The uses of SCHEMA and DATABASE are interchangeable – they mean the same thing. CREATE DATABASE was added in Hive 0.6 (HIVE-675).  The WITH DBPROPERTIES clause was added in Hive 0.7 (HIVE-1836).

Drop Database

DROP (DATABASE|SCHEMA) [IF EXISTS] database_name [RESTRICT|CASCADE];

The uses of SCHEMA and DATABASE are interchangeable – they mean the same thing. DROP DATABASE was added in Hive 0.6 (HIVE-675).

Alter Database

ALTER DATABASE database_name SET DBPROPERTIES (property_name=property_value, ...);

ALTER DATABASE database_name SET OWNER [USER|ROLE] user_or_role;   (Hive 0.13.0 and later)

No other metadata about a database can be changed. 

Currently the SCHEMA keyword cannot be used as an alternative for DATABASE (see HIVE-6601).

Use Database

USE database_name;
USE DEFAULT;

USE sets the current database for all subsequent HiveQL statements. To revert to the default database, use the keyword "default" instead of a database name.

USE database_name was added in Hive 0.6 (HIVE-675).

Create/Drop/Truncate Table

Create Table

CREATE [TEMPORARY] [EXTERNAL] TABLE [IF NOT EXISTS] [db_name.]table_name   (Note: TEMPORARY available starting with Hive 0.14.0)
  [(col_name data_type [COMMENT col_comment], ...)]
  [COMMENT table_comment]
  [PARTITIONED BY (col_name data_type [COMMENT col_comment], ...)]
  [CLUSTERED BY (col_name, col_name, ...) [SORTED BY (col_name [ASC|DESC], ...)] INTO num_buckets BUCKETS]
  [SKEWED BY (col_name, col_name, ...) ON ([(col_value, col_value, ...), ...|col_value, col_value, ...])
                                      [STORED AS DIRECTORIES] (Note: Only available starting with Hive 0.10.0)]
  [
   [ROW FORMAT row_format] [STORED AS file_format]
   | STORED BY 'storage.handler.class.name' [WITH SERDEPROPERTIES (...)]  (Note: Only available starting with Hive 0.6.0)
  ]
  [LOCATION hdfs_path]
  [TBLPROPERTIES (property_name=property_value, ...)]  (Note: Only available starting with Hive 0.6.0)
  [AS select_statement]  (Note: Only available starting with Hive 0.5.0, and not supported when creating external tables.)

CREATE [TEMPORARY] [EXTERNAL] TABLE [IF NOT EXISTS] [db_name.]table_name
  LIKE existing_table_or_view_name
  [LOCATION hdfs_path]

data_type
  : primitive_type
  | array_type
  | map_type
  | struct_type
  | union_type (Note: Only available starting with Hive 0.7.0)

primitive_type
  : TINYINT
  | SMALLINT
  | INT
  | BIGINT
  | BOOLEAN
  | FLOAT
  | DOUBLE
  | STRING
  | BINARY (Note: Only available starting with Hive 0.8.0)
  | TIMESTAMP (Note: Only available starting with Hive 0.8.0)
  | DECIMAL (Note: Only available starting with Hive 0.11.0)
  | DECIMAL(precision, scale) (Note: Only available starting with Hive 0.13.0)
  | VARCHAR (Note: Only available starting with Hive 0.12.0)
  | CHAR (Note: Only available starting with Hive 0.13.0)

array_type
  : ARRAY < data_type >

map_type
  : MAP < primitive_type, data_type >

struct_type
  : STRUCT < col_name : data_type [COMMENT col_comment], ...>

union_type
   : UNIONTYPE < data_type, data_type, ... > (Note: Only available starting with Hive 0.7.0)

row_format
  : DELIMITED [FIELDS TERMINATED BY char [ESCAPED BY char]] [COLLECTION ITEMS TERMINATED BY char]
        [MAP KEYS TERMINATED BY char] [LINES TERMINATED BY char]
        [NULL DEFINED AS char] (Note: Only available starting with Hive 0.13)
  | SERDE serde_name [WITH SERDEPROPERTIES (property_name=property_value, property_name=property_value, ...)]

file_format:
  : SEQUENCEFILE
  | TEXTFILE
  | RCFILE     (Note: Only available starting with Hive 0.6.0)
  | ORC        (Note: Only available starting with Hive 0.11.0)
  | AVRO       (Note: Only available starting with Hive 0.14.0)
  | INPUTFORMAT input_format_classname OUTPUTFORMAT output_format_classname

CREATE TABLE creates a table with the given name. An error is thrown if a table or view with the same name already exists. You can use IF NOT EXISTS to skip the error.

  • Table names and column names are case insensitive but SerDe and property names are case sensitive.
    • In Hive 0.12 and earlier, only alphanumeric and underscore characters are allowed in table and column names.
    • In Hive 0.13 and later, column names can contain any Unicode character (see HIVE-6013). Any column name that is specified within backticks (`) is treated literally. Within a backtick string, use double backticks (``) to represent a backtick character.
    • To revert to pre-0.13.0 behavior and restrict column names to alphanumeric and underscore characters, set the configuration property hive.support.quoted.identifiers to none. In this configuration, backticked names are interpreted as regular expressions. For details, see Supporting Quoted Identifiers in Column Names.
  • Table and column comments are string literals (single-quoted).
  • The TBLPROPERTIES clause allows you to tag the table definition with your own metadata key/value pairs. Some predefined table properties also exist, for example:
  • To specify a database for the table, either issue the USE database_name statement prior to the CREATE TABLE statement (in Hive 0.6 and later) or qualify the table name with a database name ("database_name.table.name" in Hive 0.7 and later). The keyword "default" can be used for the default database.

See Alter Table below for more information about table comments, table properties, and SerDe properties.

See Type System and Hive Data Types for details about the primitive and complex data types.

Row Format, Storage Format, and SerDe

You can create tables with custom SerDe or using native SerDe. A native SerDe is used if ROW FORMAT is not specified or ROW FORMAT DELIMITED is specified. You can use the DELIMITED clause to read delimited files, you can enable escaping for the delimiter characters by using 'ESCAPED BY' clause (e.g. ESCAPED BY '\') (escaping is needed if you want to work with data that can contain these delimiter chars). A custom NULL format can also be specified using 'NULL DEFINED AS' clause (default is '\N'). Use the SERDE clause to create a table with custom SerDe. For more information on SerDes see:

You must specify a list of columns for tables that use a native SerDe. Refer to the Types part of the User Guide for the allowable column types. A list of columns for tables that use a custom SerDe may be specified but Hive will query the SerDe to determine the actual list of columns for this table.

Use STORED AS TEXTFILE if the data needs to be stored as plain text files.

Use STORED AS SEQUENCEFILE if the data needs to be compressed. Please read more about CompressedStorage if you are planning to keep data compressed in your Hive tables.

Use STORED AS ORC if the data needs to be stored in ORC file format.

Use ROW FORMAT SERDE for the RegEx SerDe, as shown in the example Apache Weblog Data in Getting Started.

Use INPUTFORMAT and OUTPUTFORMAT in the file_format to specify the name of a corresponding InputFormat and OutputFormat class as a string literal, for example, 'org.apache.hadoop.hive.contrib.fileformat.base64.Base64TextInputFormat'. For LZO compression, the values to use are 'INPUTFORMAT "com.hadoop.mapred.DeprecatedLzoTextInputFormat" OUTPUTFORMAT "org.apache.hadoop.hive.ql.io.HiveIgnoreKeyTextOutputFormat"' (see LZO Compression).

Use STORED AS PARQUET (without ROW FORMAT SERDE) for the Parquet columnar storage format in Hive 0.13.0 and later; or use ROW FORMAT SERDE ... STORED AS INPUTFORMAT ... OUTPUTFORMAT ... in Hive 0.10, 0.11, or 0.12.

Use STORED AS AVRO for Avro files in Hive 0.14.0 and later (see Avro SerDe).

Use STORED BY to create a non-native table, for example in HBase. See StorageHandlers for more information on this option.

To change a table's SerDe or SERDEPROPERTIES, use the ALTER TABLE statement as described below in Add SerDe Properties.

Partitioned Tables

Partitioned tables can be created using the PARTITIONED BY clause. A table can have one or more partition columns and a separate data directory is created for each distinct value combination in the partition columns. Further, tables or partitions can be bucketed using CLUSTERED BY columns, and data can be sorted within that bucket via SORT BY columns. This can improve performance on certain kinds of queries.

If, when creating a partitioned table, you get this error: "FAILED: Error in semantic analysis: Column repeated in partitioning columns," it means you are trying to include the partitioned column in the data of the table itself. You probably really do have the column defined. However, the partition you create makes a pseudocolumn on which you can query, so you must rename your table column to something else (that users should not query on!).

Here is an example. Suppose your original table was this:

id     int,
date   date,
name   varchar

Now you want to partition on date. Your Hive definition would be this:

create table table_name (
  id                int,
  dtDontQuery       string,
  name              string
)
partitioned by (date string)

Now your users will still query on "where date = '...'" but the 2nd column will be the original values.

Here's an example statement to create a table:

CREATE TABLE page_view(viewTime INT, userid BIGINT,
     page_url STRING, referrer_url STRING,
     ip STRING COMMENT 'IP Address of the User')
 COMMENT 'This is the page view table'
 PARTITIONED BY(dt STRING, country STRING)
 STORED AS SEQUENCEFILE;

The statement above creates the page_view table with viewTime, userid, page_url, referrer_url, and ip columns (including comments). The table is also partitioned and data is stored in sequence files. The data format in the files is assumed to be field-delimited by ctrl-A and row-delimited by newline.

CREATE TABLE page_view(viewTime INT, userid BIGINT,
     page_url STRING, referrer_url STRING,
     ip STRING COMMENT 'IP Address of the User')
 COMMENT 'This is the page view table'
 PARTITIONED BY(dt STRING, country STRING)
 ROW FORMAT DELIMITED
   FIELDS TERMINATED BY '\001'
STORED AS SEQUENCEFILE;

The above statement lets you create the same table as the previous table.

In the previous examples the data is stored in <hive.metastore.warehouse.dir>/page_view. Specify a value for the key hive.metastore.warehouse.dir in Hive config file hive-site.xml.

External Tables

The EXTERNAL keyword lets you create a table and provide a LOCATION so that Hive does not use a default location for this table. This comes in handy if you already have data generated. When dropping an EXTERNAL table, data in the table is NOT deleted from the file system.

An EXTERNAL table points to any HDFS location for its storage, rather than being stored in a folder specified by the configuration property hive.metastore.warehouse.dir.

CREATE EXTERNAL TABLE page_view(viewTime INT, userid BIGINT,
     page_url STRING, referrer_url STRING,
     ip STRING COMMENT 'IP Address of the User',
     country STRING COMMENT 'country of origination')
 COMMENT 'This is the staging page view table'
 ROW FORMAT DELIMITED FIELDS TERMINATED BY '\054'
 STORED AS TEXTFILE
 LOCATION '<hdfs_location>';

You can use the above statement to create a page_view table which points to any hdfs location for its storage. But you still have to make sure that the data is delimited as specified in the CREATE statement above.

Create Table As Select (CTAS)

Tables can also be created and populated by the results of a query in one create-table-as-select (CTAS) statement. The table created by CTAS is atomic, meaning that the table is not seen by other users until all the query results are populated. So other users will either see the table with the complete results of the query or will not see the table at all.

There are two parts in CTAS, the SELECT part can be any SELECT statement supported by HiveQL. The CREATE part of the CTAS takes the resulting schema from the SELECT part and creates the target table with other table properties such as the SerDe and storage format.

CTAS has these restrictions:

  • The target table cannot be a partitioned table.
  • The target table cannot be an external table.
  • The target table cannot be a list bucketing table.

Example:

CREATE TABLE new_key_value_store
   ROW FORMAT SERDE "org.apache.hadoop.hive.serde2.columnar.ColumnarSerDe"
   STORED AS RCFile
   AS
SELECT (key % 1024) new_key, concat(key, value) key_value_pair
FROM key_value_store
SORT BY new_key, key_value_pair;

The above CTAS statement creates the target table new_key_value_store with the schema (new_key DOUBLE, key_value_pair STRING) derived from the results of the SELECT statement. If the SELECT statement does not specify column aliases, the column names will be automatically assigned to _col0, _col1, and _col2 etc. In addition, the new target table is created using a specific SerDe and a storage format independent of the source tables in the SELECT statement.

Starting with Hive 0.13.0, the SELECT statement can include one or more common table expressions (CTEs), as shown in the SELECT syntax. For an example, see Common Table Expression.

Being able to select data from one table to another is one of the most powerful features of Hive. Hive handles the conversion of the data from the source format to the destination format as the query is being executed.

Create Table Like

The LIKE form of CREATE TABLE allows you to copy an existing table definition exactly (without copying its data). In contrast to CTAS, the statement below creates a new empty_key_value_store table whose definition exactly matches the existing key_value_store in all particulars other than table name. The new table contains no rows.

CREATE TABLE empty_key_value_store
LIKE key_value_store;

Before Hive 0.8.0, CREATE TABLE LIKE view_name would make a copy of the view. In Hive 0.8.0 and later releases, CREATE TABLE LIKE view_name creates a table by adopting the schema of view_name (fields and partition columns) using defaults for SerDe and file formats.

Bucketed Sorted Tables

CREATE TABLE page_view(viewTime INT, userid BIGINT,
     page_url STRING, referrer_url STRING,
     ip STRING COMMENT 'IP Address of the User')
 COMMENT 'This is the page view table'
 PARTITIONED BY(dt STRING, country STRING)
 CLUSTERED BY(userid) SORTED BY(viewTime) INTO 32 BUCKETS
 ROW FORMAT DELIMITED
   FIELDS TERMINATED BY '\001'
   COLLECTION ITEMS TERMINATED BY '\002'
   MAP KEYS TERMINATED BY '\003'
 STORED AS SEQUENCEFILE;

In the example above, the page_view table is bucketed (clustered by) userid and within each bucket the data is sorted in increasing order of viewTime. Such an organization allows the user to do efficient sampling on the clustered column - in this case userid. The sorting property allows internal operators to take advantage of the better-known data structure while evaluating queries, also increasing efficiency. MAP KEYS and COLLECTION ITEMS keywords can be used if any of the columns are lists or maps.

The CLUSTERED BY and SORTED BY creation commands do not affect how data is inserted into a table – only how it is read. This means that users must be careful to insert data correctly by specifying the number of reducers to be equal to the number of buckets, and using CLUSTER BY and SORT BY commands in their query.

There is also an example of creating and populating bucketed tables.

Skewed Tables

Version information

As of Hive 0.10.0 (HIVE-3072 and HIVE-3649). See HIVE-3026 for additional JIRA tickets that implemented list buckeing in Hive 0.10.0 and 0.11.0.

Design document

Read the design document for more information.

This feature can be used to improve performance for tables where one or more columns have skewed values. By specifying the values that appear very often (heavy skew) Hive will split those out into separate files (directories in case of list bucketing) automatically and take this fact into account during queries so that it can skip (or include) the whole file (directory in case of list bucketing) if possible.

This can be specified on a per-table level during table creation.

This is an example where we have one column with three skewed values, optionally with the STORED AS DIRECTORIES clause for list bucketing:

CREATE TABLE list_bucket_single (key STRING, value STRING) SKEWED BY (key) ON (1,5,6) [STORED AS DIRECTORIES];

And here is an example of a table with two skewed columns:

CREATE TABLE list_bucket_multiple (col1 STRING, col2 int, col3 STRING) SKEWED BY (col1, col2) ON (('s1',1), ('s3',3), ('s13',13), ('s78',78)) [STORED AS DIRECTORIES];

Temporary Tables

Version information

As of Hive 0.14.0 (HIVE-7090)

A table that has been created as a temporary table will only be visible to the current session. Data will be stored in the user's scratch directory, and deleted at the end of the session.

If a temporary table is created with a database/table name of a permanent table which already exists in the database, then within that session any references to that table will resolve to the temporary table, rather than to the permanent table. The user will not be able to access the original table within that session without either dropping the temporary table, or renaming it to a non-conflicting name.

Temporary tables have the following limitations:

  • Partition columns are not supported
  • No support for creation of indexes

Drop Table

DROP TABLE [IF EXISTS] table_name

DROP TABLE removes metadata and data for this table. The data is actually moved to the .Trash/Current directory if Trash is configured. The metadata is completely lost.

When dropping an EXTERNAL table, data in the table will NOT be deleted from the file system.

When dropping a table referenced by views, no warning is given (the views are left dangling as invalid and must be dropped or recreated by the user).

See the next section on ALTER TABLE for how to drop partitions.

Otherwise, the table information is removed from the metastore and the raw data is removed as if by 'hadoop dfs -rm'. In many cases, this results in the table data being moved into the user's .Trash folder in their home directory; users who mistakenly DROP TABLEs mistakenly may thus be able to recover their lost data by re-creating a table with the same schema, re-creating any necessary partitions, and then moving the data back into place manually using Hadoop. This solution is subject to change over time or across installations as it relies on the underlying implementation; users are strongly encouraged not to drop tables capriciously.

In Hive 0.7.0 or later, DROP returns an error if the table doesn't exist, unless IF EXISTS is specified or the configuration variable hive.exec.drop.ignorenonexistent is set to true.

Truncate Table

Version information

As of Hive 0.11.0 (HIVE-446)

TRUNCATE TABLE table_name [PARTITION partition_spec];

partition_spec:
  : (partition_col = partition_col_value, partition_col = partiton_col_value, ...)

Removes all rows from a table or partition(s). Currently target table should be native/managed table or exception will be thrown. User can specify partial partition_spec for truncating multiple partitions at once and omitting partition_spec will truncate all partitions in the table.

Alter Table/Partition/Column

Alter table statements enable you to change the structure of an existing table. You can add columns/partitions, change SerDe, add table and SerDe properties, or rename the table itself. Similarly, alter table partition statements allow you change the properties of a specific partition in the named table.

Alter Table

Rename Table

ALTER TABLE table_name RENAME TO new_table_name

This statement lets you change the name of a table to a different name.

As of version 0.6, a rename on a managed table moves its HDFS location as well. (Older Hive versions just renamed the table in the metastore without moving the HDFS location.)

Alter Table Properties

ALTER TABLE table_name SET TBLPROPERTIES table_properties

table_properties:
  : (property_name = property_value, property_name = property_value, ... )

You can use this statement to add your own metadata to the tables. Currently last_modified_user, last_modified_time properties are automatically added and managed by Hive. Users can add their own properties to this list. You can do DESCRIBE EXTENDED TABLE to get this information.

Alter Table Comment

To change the comment of a table you have to change the comment property of the TBLPROPERTIES:

ALTER TABLE table_name SET TBLPROPERTIES ('comment' = new_comment);

Add SerDe Properties

ALTER TABLE table_name SET SERDE serde_class_name [WITH SERDEPROPERTIES serde_properties]
ALTER TABLE table_name SET SERDEPROPERTIES serde_properties

serde_properties:
  : (property_name = property_value, property_name = property_value, ... )

These statements enable you to change a table's SerDe or add user-defined metadata to the table's SerDe object.

The SerDe properties are passed to the table's SerDe when it is being initialized by Hive to serialize and deserialize data. So users can store any information required for their custom SerDe here. Refer to the SerDe documentation and Hive SerDe in the Developer Guide for more information, and see Row Format, Storage Format, and SerDe above for details about setting a table's SerDe and SERDEPROPERTIES in a CREATE TABLE statement.

Example, note that both property_name and property_value must be quoted:

ALTER TABLE table_name SET SERDEPROPERTIES ('field.delim' = ',');

Alter Table Storage Properties

ALTER TABLE table_name CLUSTERED BY (col_name, col_name, ...) [SORTED BY (col_name, ...)] INTO num_buckets BUCKETS

These statements change the table's physical storage properties.

NOTE: These commands will only modify Hive's metadata, and will NOT reorganize or reformat existing data. Users should make sure the actual data layout conforms with the metadata definition.

Additional Alter Table Statements

See Alter Either Table or Partition below for more DDL statements that alter tables.

Alter Partition

Add Partitions

ALTER TABLE table_name ADD [IF NOT EXISTS] PARTITION partition_spec [LOCATION 'location1'] partition_spec [LOCATION 'location2'] ...

partition_spec:
  : (partition_col = partition_col_value, partition_col = partiton_col_value, ...)

You can use ALTER TABLE ADD PARTITION to add partitions to a table. Partition values should be quoted only if they are strings. The location must be a directory inside of which data files reside. (ADD PARTITION changes the table metadata, but does not load data. If the data does not exist in the partition's location, queries will not return any results.)

Note that it is proper syntax to have multiple partition_spec in a single ALTER TABLE, but if you do this in version 0.7, your partitioning scheme will fail. That is, every query specifying a partition will always use only the first partition. Instead, you should use the following form if you want to add many partitions in Hive 0.7:

ALTER TABLE table_name ADD PARTITION (partCol = 'value1') location 'loc1';
ALTER TABLE table_name ADD PARTITION (partCol = 'value2') location 'loc2';
...
ALTER TABLE table_name ADD PARTITION (partCol = 'valueN') location 'locN';

Specifically, the following example (which was the default example before) will FAIL silently and without error, and all queries will go only to dt='2008-08-08' partition, no matter which partition you specify.

ALTER TABLE page_view ADD PARTITION (dt='2008-08-08', country='us') location '/path/to/us/part080808'
                          PARTITION (dt='2008-08-09', country='us') location '/path/to/us/part080809';

In Hive 0.8 and later, you can add multiple partitions in a single ALTER TABLE statement as shown in the previous example.

An error is thrown if the partition_spec for the table already exists. You can use IF NOT EXISTS to skip the error.

Dynamic Partitions

Partitions can be added to a table dynamically, using a Hive INSERT statement (or a Pig STORE statement). See these documents for details and examples:

Rename Partition

Version information

As of Hive 0.9

ALTER TABLE table_name PARTITION partition_spec RENAME TO PARTITION partition_spec;

This statement lets you change the value of a partition column.

Exchange Partition

Version information

As of Hive 0.12 (HIVE-4095)

ALTER TABLE table_name_1 EXCHANGE PARTITION (partition_spec) WITH TABLE table_name_2;

This statement lets you move the data in a partition from a table to another table that has the same schema but does not already have that partition. For details, see Exchange Partition and HIVE-4095.

Recover Partitions (MSCK REPAIR TABLE)

Hive stores a list of partitions for each table in its metastore. If, however, new partitions are directly added to HDFS (say by using hadoop fs -put command), the metastore (and hence Hive) will not be aware of these partitions unless the user runs ALTER TABLE table_name ADD PARTITION commands on each of the newly added partitions.

However, users can run

MSCK REPAIR TABLE table_name;

which will add metadata about partitions to the Hive metastore for partitions for which such metadata doesn't already exist. In other words, it will add any partitions that exist on HDFS but not in metastore to the metastore. See HIVE-874 for more details.

The equivalent command on Amazon Elastic MapReduce (EMR)'s version of Hive is

ALTER TABLE table_name RECOVER PARTITIONS;

Drop Partitions

ALTER TABLE table_name DROP [IF EXISTS] PARTITION partition_spec, PARTITION partition_spec,...

You can use ALTER TABLE DROP PARTITION to drop a partition for a table. This removes the data and metadata for this partition.

For tables that are protected by NO DROP CASCADE, you can use the predicate IGNORE PROTECTION to drop a specified partition or set of partitions (for example, when splitting a table between two Hadoop clusters).

ALTER TABLE table_name DROP [IF EXISTS] PARTITION partition_spec IGNORE PROTECTION;

The above command will drop that partition regardless of protection stats.

In Hive 0.7.0 or later, DROP returns an error if the partition doesn't exist, unless IF EXISTS is specified or the configuration variable hive.exec.drop.ignorenonexistent is set to true.

ALTER TABLE page_view DROP PARTITION (dt='2008-08-08', country='us');

(Un)Archive Partition

ALTER TABLE table_name ARCHIVE PARTITION partition_spec;
ALTER TABLE table_name UNARCHIVE PARTITION partition_spec;

Archiving is a feature to moves a partition's files into a Hadoop Archive (HAR). Note that only the file count will be reduced; HAR does not provide any compression. See LanguageManual Archiving for more information

Alter Either Table or Partition

Alter Table/Partition File Format

ALTER TABLE table_name [PARTITION partitionSpec] SET FILEFORMAT file_format

This statement changes the table's (or partition's) file format. For available file_format options, see the section above on CREATE TABLE.

Alter Table/Partition Location

ALTER TABLE table_name [PARTITION partitionSpec] SET LOCATION "new location"

Alter Table/Partition Touch

ALTER TABLE table_name TOUCH [PARTITION partitionSpec];

TOUCH reads the metadata, and writes it back. This has the effect of causing the pre/post execute hooks to fire. An example use case is if you have a hook that logs all the tables/partitions that were modified, along with an external script that alters the files on HDFS directly. Since the script modifies files outside of hive, the modification wouldn't be logged by the hook. The external script could call TOUCH to fire the hook and mark the said table or partition as modified.

Also, it may be useful later if we incorporate reliable last modified times. Then touch would update that time as well.

Note that TOUCH doesn't create a table or partition if it doesn't already exist. (See Create Table.)

Alter Table/Partition Protections

ALTER TABLE table_name [PARTITION partition_spec] ENABLE|DISABLE NO_DROP;
ALTER TABLE table_name [PARTITION partition_spec] ENABLE|DISABLE OFFLINE;

Protection on data can be set at either the table or partition level. Enabling NO_DROP prevents a table or partition from being dropped. Enabling OFFLINE prevents the data in a table or partition from being queried, but the metadata can still be accessed. Note, if any partition in a table has NO_DROP enabled, the table cannot be dropped either.

Alter Table/Partition Compact

Version information

In Hive release 0.13.0 and later when transactions are being used, the ALTER TABLE statement can request compaction of a table or partition.

ALTER TABLE table_name [PARTITION (partition_key = 'partition_value' [, ...])] COMPACT 'compaction_type' 

In general you do not need to request compactions when Hive transactions are being used, because the system will detect the need for them and initiate the compaction. However, if compaction is turned off for a table or you want to compact the table at a time the system would not choose to, ALTER TABLE can initiate the compaction. The statement will enqueue a request for compaction and return. To watch the progress of the compaction, use SHOW COMPACTIONS.

The compaction_type can be MAJOR or MINOR. See the Basic Design section in Hive Transactions for more information.

Alter Column

Rules for Column Names

Column names are case insensitive.

Version information

In Hive release 0.12.0 and earlier, column names can only contain alphanumeric and underscore characters.

In Hive release 0.13.0 and later, by default column names can be specified within backticks (`) and contain any Unicode character (HIVE-6013). Within a string delimited by backticks, all characters are treated literally except that double backticks (``) represent one backtick character. The pre-0.13.0 behavior can be used by setting hive.support.quoted.identifiers to none, in which case backticked names are interpreted as regular expressions. See Supporting Quoted Identifiers in Column Names for details.

Change Column Name/Type/Position/Comment

ALTER TABLE table_name CHANGE [COLUMN] col_old_name col_new_name column_type [COMMENT col_comment] [FIRST|AFTER column_name]

This command will allow users to change a column's name, data type, comment, or position, or an arbitrary combination of them.

Example:

CREATE TABLE test_change (a int, b int, c int);

// will change column a's name to a1
ALTER TABLE test_change CHANGE a a1 INT;

// will change column a's name to a1, a's data type to string, and put it after column b. The new table's structure is: b int, a1 string, c int
ALTER TABLE test_change CHANGE a a1 STRING AFTER b;

// will change column b's name to b1, and put it as the first column. The new table's structure is: b1 int, a string, c int
ALTER TABLE test_change CHANGE b b1 INT FIRST;

NOTE: The column change command will only modify Hive's metadata, and will NOT touch data. Users should make sure the actual data layout conforms with the metadata definition.

Add/Replace Columns

ALTER TABLE table_name ADD|REPLACE COLUMNS (col_name data_type [COMMENT col_comment], ...)

ADD COLUMNS lets you add new columns to the end of the existing columns but before the partition columns. This is supported for Avro backed tables as well, for Hive 0.14 and later.

REPLACE COLUMNS removes all existing columns and adds the new set of columns. This can be done only for tables with native SerDe (DynamicSerDe, MetadataTypedColumnsetSerDe, LazySimpleSerDe and ColumnarSerDe). Refer to SerDe section of User Guide for more information. REPLACE COLUMNS can also be used to drop columns. For example:

"ALTER TABLE test_change REPLACE COLUMNS (a int, b int);" will remove column `c' from test_change's schema. Note that this does not delete underlying data, it just changes the schema.

Create/Drop/Alter View

Version information

View support is only available starting in Hive 0.6.

Create View

CREATE VIEW [IF NOT EXISTS] view_name [(column_name [COMMENT column_comment], ...) ]
[COMMENT view_comment]
[TBLPROPERTIES (property_name = property_value, ...)]
AS SELECT ...

CREATE VIEW creates a view with the given name. An error is thrown if a table or view with the same name already exists. You can use IF NOT EXISTS to skip the error.

If no column names are supplied, the names of the view's columns will be derived automatically from the defining SELECT expression. (If the SELECT contains unaliased scalar expressions such as x+y, the resulting view column names will be generated in the form _C0, _C1, etc.) When renaming columns, column comments can also optionally be supplied. (Comments are not automatically inherited from underlying columns.)

A CREATE VIEW statement will fail if the view's defining SELECT expression is invalid.

Note that a view is a purely logical object with no associated storage. (No support for materialized views is currently available in Hive.) When a query references a view, the view's definition is evaluated in order to produce a set of rows for further processing by the query. (This is a conceptual description; in fact, as part of query optimization, Hive may combine the view's definition with the query's, e.g. pushing filters from the query down into the view.)

A view's schema is frozen at the time the view is created; subsequent changes to underlying tables (e.g. adding a column) will not be reflected in the view's schema. If an underlying table is dropped or changed in an incompatible fashion, subsequent attempts to query the invalid view will fail.

Views are read-only and may not be used as the target of LOAD/INSERT/ALTER. For changing metadata, see ALTER VIEW.

A view may contain ORDER BY and LIMIT clauses. If a referencing query also contains these clauses, the query-level clauses are evaluated after the view clauses (and after any other operations in the query). For example, if a view specifies LIMIT 5, and a referencing query is executed as (select * from v LIMIT 10), then at most 5 rows will be returned.

Starting with Hive 0.13.0, the view's select statement can include one or more common table expressions (CTEs) as shown in the SELECT syntax. For examples of CTEs in CREATE VIEW statements, see Common Table Expression.

Example of view creation:

CREATE VIEW onion_referrers(url COMMENT 'URL of Referring page')
COMMENT 'Referrers to The Onion website'
AS
SELECT DISTINCT referrer_url
FROM page_view
WHERE page_url='http://www.theonion.com';

Use SHOW CREATE TABLE to display the CREATE VIEW statement that created a view.

Drop View

DROP VIEW [IF EXISTS] view_name

DROP VIEW removes metadata for the specified view. (It is illegal to use DROP TABLE on a view.)

When dropping a view referenced by other views, no warning is given (the dependent views are left dangling as invalid and must be dropped or recreated by the user).

In Hive 0.7.0 or later, DROP returns an error if the view doesn't exist, unless IF EXISTS is specified or the configuration variable hive.exec.drop.ignorenonexistent is set to true.

Example:

DROP VIEW onion_referrers;

Alter View Properties

ALTER VIEW view_name SET TBLPROPERTIES table_properties

table_properties:
  : (property_name = property_value, property_name = property_value, ...)

As with ALTER TABLE, you can use this statement to add your own metadata to a view.

Alter View As Select

Version information

As of Hive 0.11

ALTER VIEW view_name AS select_statement

Alter View As Select changes the definition of a view, which must exist. The syntax is similar to that for CREATE VIEW and the effect is the same as for CREATE OR REPLACE VIEW.

Note: The view must already exist, and if the view has partitions, it could not be replaced by Alter View As Select.

Create/Drop/Alter Index

Version information

As of Hive 0.7

This section provides a brief introduction to Hive indexes, which are documented more fully here:

In Hive 0.12.0 and earlier releases, the index name is case-sensitive for CREATE INDEX and DROP INDEX statements. However, ALTER INDEX requires an index name that was created with lowercase letters (see HIVE-2752). This bug is fixed in Hive 0.13.0 by making index names case-insensitive for all HiveQL statements. For releases prior to 0.13.0, the best practice is to use lowercase letters for all index names.

Create Index

CREATE INDEX index_name
ON TABLE base_table_name (col_name, ...)
AS index_type
[WITH DEFERRED REBUILD]
[IDXPROPERTIES (property_name=property_value, ...)]
[IN TABLE index_table_name]
[
   [ ROW FORMAT ...] STORED AS ...
   | STORED BY ...
]
[LOCATION hdfs_path]
[TBLPROPERTIES (...)]
[COMMENT "index comment"]

CREATE INDEX creates an index on a table using the given list of columns as keys. See CREATE INDEX in the Indexes design document.

Drop Index

DROP INDEX [IF EXISTS] index_name ON table_name

DROP INDEX drops the index, as well as deleting the index table.

In Hive 0.7.0 or later, DROP returns an error if the index doesn't exist, unless IF EXISTS is specified or the configuration variable hive.exec.drop.ignorenonexistent is set to true.

Alter Index

ALTER INDEX index_name ON table_name [PARTITION partitionSpec] REBUILD

ALTER INDEX ... REBUILD builds an index that was created using the WITH DEFERRED REBUILD clause, or rebuilds a previously built index. If PARTITION is specified, only that partition is rebuilt.

Create/Drop Function

Temporary Functions

Create Temporary Function

CREATE TEMPORARY FUNCTION function_name AS class_name

This statement lets you create a function that is implemented by the class_name. You can use this function in Hive queries as long as the session lasts. You can use any class that is in the class path of Hive. You can add jars to class path by executing 'ADD JAR' statements. Please refer to the CLI section Hive Interactive Shell Commands, including Hive Resources, for more information on how to add/delete files from the Hive classpath. Using this, you can register User Defined Functions (UDF's).

Also see Hive Plugins for general information about creating custom UDFs.

Drop Temporary Function

You can unregister a UDF as follows:

DROP TEMPORARY FUNCTION [IF EXISTS] function_name

In Hive 0.7.0 or later, DROP returns an error if the function doesn't exist, unless IF EXISTS is specified or the configuration variable hive.exec.drop.ignorenonexistent is set to true.

Permanent Functions

In Hive 0.13 or later, functions can be registered to the metastore, so they can be referenced in a query without having to create a temporary function each session.

Create Function

Version information

As of Hive 0.13.0 (HIVE-6047)

CREATE FUNCTION [db_name.]function_name AS class_name [USING JAR|FILE|ARCHIVE 'file_uri' [, JAR|FILE|ARCHIVE 'file_uri'] ]

This statement lets you create a function that is implemented by the class_name.  Jars, files, or archives which need to be added to the environment can be specified with the USING clause; when the function is referenced for the first time by a Hive session, these resources will be added to the environment as if ADD JAR/FILE had been issued.  If Hive is not in local mode, then the resource location must be a non-local URI such as an HDFS location.

The function will be added to the database specified, or to the current database at the time that the function was created. The function can be referenced by fully qualifying the function name (db_name.funciton_name), or can be referenced without qualification if the function is in the current database.

Drop Function

Version information

As of Hive 0.13.0 (HIVE-6047)

DROP FUNCTION [IF EXISTS] function_name

DROP returns an error if the function doesn't exist, unless IF EXISTS is specified or the configuration variable hive.exec.drop.ignorenonexistent is set to true.

Create/Drop/Grant/Revoke Roles and Privileges

Hive Default Authorization - Legacy Mode has information about these DDL statements:

For SQL standard based authorization in Hive 0.13.0 and later releases, see these DDL statements:

Show

These statements provide a way to query the Hive metastore for existing data and metadata accessible to this Hive system.

Show Databases

SHOW (DATABASES|SCHEMAS) [LIKE identifier_with_wildcards];

SHOW DATABASES lists all of the databases defined in the metastore. The optional LIKE clause allows the list of databases to be filtered using a regular expression. Wildcards in the regular expression can only be '*' for any character(s) or '|' for a choice. Examples are 'employees', 'emp*', 'emp*|*ees', all of which will match the database named 'employees'.

Show Tables/Partitions/Indexes

Show Tables

SHOW TABLES [IN database_name] [identifier_with_wildcards];

SHOW TABLES lists all the base tables and views in the current database (or the one explicitly named using the IN clause) with names matching the optional regular expression. Wildcards in the regular expression can only be '*' for any character(s) or '|' for a choice. Examples are 'page_view', 'page_v*', '*view|page*', all which will match the 'page_view' table. Matching tables are listed in alphabetical order. It is not an error if there are no matching tables found in metastore. If no regular expression is given then all tables in the selected database are listed.

Show Partitions

SHOW PARTITIONS table_name

SHOW PARTITIONS lists all the existing partitions for a given base table. Partitions are listed in alphabetical order.

Version information

As of Hive 0.6, SHOW PARTITIONS can filter the list of partitions as shown below.

It is also possible to specify parts of a partition specification to filter the resulting list. For example:

SHOW PARTITIONS table_name PARTITION(ds='2010-03-03');            (Hive 0.6 and later)
SHOW PARTITIONS table_name PARTITION(hr='12');                    (Hive 0.6 and later)
SHOW PARTITIONS table_name PARTITION(ds='2010-03-03', hr='12');   (Hive 0.6 and later)

Version information

Starting with Hive 0.13.0, SHOW PARTITIONS can specify a database (HIVE-5912).

SHOW PARTITIONS [db_name.]table_name [PARTITION(partition_desc)]            (Hive 0.13.0 and later)

Example:

SHOW PARTITIONS databaseFoo.tableBar PARTITION(ds='2010-03-03', hr='12');   (Hive 0.13.0 and later)

Show Table/Partition Extended

SHOW TABLE EXTENDED [IN|FROM database_name] LIKE identifier_with_wildcards [PARTITION(partition_desc)]

SHOW TABLE EXTENDED will list information for all tables matching the given regular expression. Users cannot use regular expression for table name if a partition specification is present. This command's output includes basic table information and file system information like totalNumberFiles, totalFileSize, maxFileSize, minFileSize,lastAccessTime, and lastUpdateTime. If partition is present, it will output the given partition's file system information instead of table's file system information.

Show Table Properties

Version information

As of Hive 0.10.0

SHOW TBLPROPERTIES tblname;
SHOW TBLPROPERTIES tblname("foo");

The first form lists all of the table properties for the table in question one per row separated by tabs. The second form of the command prints only the value for the property that's being asked for.

Show Create Table

Version information

As of Hive 0.10

SHOW CREATE TABLE ([db_name.]table_name|view_name)

SHOW CREATE TABLE shows the CREATE TABLE statement that creates a given table, or the CREATE VIEW statement that creates a given view.

Show Indexes

Version information

As of Hive 0.7

SHOW [FORMATTED] (INDEX|INDEXES) ON table_with_index [(FROM|IN) db_name]

SHOW INDEXES shows all of the indexes on a certain column, as well as information about them: index name, table name, names of the columns used as keys, index table name, index type, and comment. If the FORMATTED keyword is used, then column titles are printed for each column.

Show Columns

Version information

As of Hive 0.10

SHOW COLUMNS (FROM|IN) table_name [(FROM|IN) db_name]

SHOW COLUMNS shows all the columns in a table including partition columns.

Show Functions

SHOW FUNCTIONS "a.*"

SHOW FUNCTIONS lists all the user defined and builtin functions matching the regular expression. To get all functions use ".*"

Show Granted Roles and Privileges

Hive Default Authorization - Legacy Mode has information about these SHOW statements:

In Hive 0.13.0 and later releases, SQL standard based authorization has these SHOW statements:

Show Locks

SHOW LOCKS <table_name>;
SHOW LOCKS <table_name> EXTENDED;
SHOW LOCKS <table_name> PARTITION (<partition_desc>);
SHOW LOCKS <table_name> PARTITION (<partition_desc>) EXTENDED;

SHOW LOCKS displays the locks on a table or partition. See Hive Concurrency Model for information about locks.

When Hive transactions are being used, SHOW LOCKS returns this information (see HIVE-6460):

  • database name
  • table name
  • partition name (if the table is partitioned)
  • the state the lock is in, which can be:
    • "acquired" – the requestor holds the lock
    • "waiting" – the requestor is waiting for the lock
    • "aborted" – the lock has timed out but has not yet been cleaned up
  • the type of lock, which can be:
    • "exclusive" – no one else can hold the lock at the same time (obtained mostly by DDL operations such as drop table)
    • "shared_read" – any number of other shared_read locks can lock the same resource at the same time (obtained by reads; confusingly, an insert operation also obtains a shared_read lock)
    • "shared_write" – any number of shared_read locks can lock the same resource at the same time, but no other shared_write locks are allowed (obtained by update and delete)
  • ID of the transaction this lock is associated with, if there is one
  • last time the holder of this lock sent a heartbeat indicating it was still alive
  • the time the lock was acquired, if it has been acquired
  • Hive user who requested the lock
  • host the user is running on

Show Transactions

Version information

SHOW TRANSACTIONS

SHOW TRANSACTIONS is for use by administrators when Hive transactions are being used. It returns a list of all currently open and aborted transactions in the system, including this information:

  • transaction ID
  • transaction state
  • user who started the transaction
  • machine where the transaction was started

Show Compactions

Version information

SHOW COMPACTIONS

SHOW COMPACTIONS returns a list of all tables and partitions currently being compacted or scheduled for compaction when Hive transactions are being used, including this information:

  • database name
  • table name
  • partition name (if the table is partitioned)
  • whether it is a major or minor compaction
  • the state the compaction is in, which can be:
    • "initiated" – waiting in the queue to be compacted
    • "working" – being compacted
    • "ready for cleaning" – the compaction has been done and the old files are scheduled to be cleaned
  • thread ID of the worker thread doing the compaction (only if in working state)
  • the time at which the compaction started (only if in working or ready for cleaning state)

Compactions are initiated automatically, but can also be initiated manually with an ALTER TABLE COMPACT statement.

Describe

Describe Database

Version information

As of Hive 0.7

DESCRIBE [EXTENDED] DATABASE db_name

DESCRIBE DATABASE shows the name of the database, its comment (if one has been set), and its root location on the filesystem. EXTENDED also shows the database properties.

Describe Table/View/Column

DESCRIBE [EXTENDED|FORMATTED] [db_name.]table_name[.col_name ( [.field_name] | [.'$elem$'] | [.'$key$'] | [.'$value$'] )* ]

DESCRIBE shows the list of columns including partition columns for the given table. If the EXTENDED keyword is specified then it will show all the metadata for the table in Thrift serialized form. This is generally only useful for debugging and not for general use. If the FORMATTED keyword is specified, then it will show the metadata in a tabular format.

Note: DESCRIBE EXTENDED shows the number of rows only if statistics were gathered when the data was loaded (see Newly Created Tables), and if the Hive CLI is used instead of a Thrift client or Beeline. HIVE-6285 will address this issue. Although ANALYZE TABLE gathers statistics after the data has been loaded (see Existing Tables), it does not currently provide information about the number of rows.

If a table has a complex column then you can examine the attributes of this column by specifying table_name.complex_col_name (and '$elem$' for array element, '$key$' for map key, and '$value$' for map value). You can specify this recursively to explore the complex column type.

For a view, DESCRIBE EXTENDED or FORMATTED can be used to retrieve the view's definition. Two relevant attributes are provided: both the original view definition as specified by the user, and an expanded definition used internally by Hive.

Version information

In Hive 0.10.0 and earlier, no distinction is made between partition columns and non-partition columns while displaying columns for DESCRIBE TABLE. From Hive 0.12.0 onwards, they are displayed separately.

In Hive 0.13.0 and later, the configuration parameter hive.display.partition.cols.separately lets you use the old behavior, if desired (HIVE-6689). For an example, see the test case in the patch for HIVE-6689.

Bug fixed in Hive 0.10.0

Database qualifiers for table names were introduced in Hive 0.7.0, but they were broken for DESCRIBE until a bug fix in Hive 0.10.0 (HIVE-1977).

 

Describe Partition

DESCRIBE [EXTENDED|FORMATTED] [db_name.]table_name PARTITION partition_spec

This statement lists metadata for a given partition. The output is similar to that of DESCRIBE table_name. Presently, the column information associated with a particular partition is not used while preparing plans.

Example:

DESCRIBE page_view PARTITION (ds='2008-08-08');

HCatalog and WebHCat DDL

For information about DDL in HCatalog and WebHCat, see:

  • No labels