You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 12 Next »

The Tuscany SDO Java Project

The SDO Java project is a subproject of the Apache Tuscany incubator project and is intended to provide a Java implementation of the SDO 2.1 specification.

Documents

SDO Specification 2.1 for Java describes the data programming interface for Java language.

SDO White Paper A white paper that explains the SDO programming model

A quick view of What is SDO can be found in this article.

SDO Java Getting Started

To get started with Java SDO, download binary or source distribution. If you are working from a source distribution, you can follow the general instructions for building the whole of the Tuscany java projects, or you can follow the intructions within the SDO Java overview to build and explore just SDO java.

Overview

The SDO Java project is a subproject of the Apache Tuscany incubator project is intended to provide a Java implementation of the SDO 2.1 specification.

The project's code base includes the following:

  • Dynamic data object support
  • Basic static code generation (generator patterns still subject to change)
  • Most Helper classes either partially or fully implemented (XMLHelper, XSDHelper, DataFactory, CopyHelper, EqualityHelper)
  • Minimal ChangeSummary support (only in DataGraph context)
  • Limited example programs

The Tuscany wiki contains an area for raw thoughts and clarifications on SDO that will eventually make it into well crafted documentation.

How to Build

There are two motivations for building SDO from source and two well tested approches to doing so. You may be wanting to build a binary release distribution from source code. Alternatively you may be wishing to establish a development environment in order to futher the development of the code. The two tested approaches are either to use maven 2 commandline builds or to java source code create projects in the Eclipse SDK.

If you simply want to create a source code distribution, then even if you are an Eclipse user its best to just follow the instructions in the BUILDING.txt file at the top of the source code distribution and run a maven command line build (since the route to establishing an Eclipse environment requires installing maven anyway). Note that SDO for Java is distributed as two source code distributions. You'll need to download two archives, one for the SDO API, and one for the Tuscany implementation of that API.

If you want to work with the SDO projects alone, without the rest of Tuscany, proceed with the following steps.

Set up your environment using the instructions for building the whole of Tuscany, but only download and install Java 5, Maven and Svn (note that only one file, Interface2JavaGenerator.java, has a Java 5 dependency, if you want to work with Java 1.4.2 then just delete this file before building).

Make sure 'mvn' and 'svn' commands are in your PATH environment variable.

Check out the SDO open source projects from Apache.

md <local tuscany dir>
cd <local tuscany dir>
svn co -N https://svn.apache.org/repos/asf/incubator/tuscany/java
cd java
svn up sdo
svn up -N spec
cd spec
svn up sdo-api

Run "mvn" under <local tuscany dir>/java directory to install POM files from the root project to the local repository


cd <local tuscany dir>/java
mvn -N
cd spec
mvn -N
cd ../sdo
mvn -N (alternatively, run without the -N option - see Note below)

You can now build SDO project as a whole or build the individual SDO subprojects.

Build SDO project

This step builds all subprojects in the source tree at once

mvn in <local tuscany dir>/java/sdo

If the mvn command completed successfully, you will see BUILD SUCCESSFUL in the output and the results of compilation will be available in jar files created under directories named "target" directly under the root directories of the projects. These jar files are also installed into your local maven repository ($HOME/.m2/repository) and are available as inputs to later build operations.

Maven fetches external resources required for a build process from the internet. These resources are at times unavailable. It may be necessary to run "mvn" again at a later time.

If you are taking time to reply to firewall prompts, this can cause some requests to time out. Set up the firewall to permit the action without prompting.

Build sub projects of SDO individually

Build sdo.spec project


cd <local tuscany dir>/java/spec/sdo-api
mvn
mvn -Peclipse eclipse:eclipse (optional: Run this command if you are using Eclipse for development.)

Build sdo.impl project

cd <local tuscany dir>/java/sdo/impl
mvn
mvn -Peclipse eclipse:eclipse (optional: Run this command if you are using Eclipse for development.)

Build sdo.tools project

cd <local tuscany dir>/java/sdo/tools
mvn
mvn -Peclipse eclipse:eclipse (optional: Run this command if you are using Eclipse for development.)

Build sdo.samples project

cd <local tuscany dir>/java/sdo/sample
mvn
mvn -Peclipse eclipse:eclipse (optional: Run this command if you are using Eclipse for development.)

SDO Project Code Structure

The SDO project is divided into five parts:

  • sdo.spec contains the SDO (commonj) interfaces defined and provided by the SDO 2 specification.
  • sdo.impl provides the runtime implementation of the SDO interfaces.
  • sdo.tools contains import and generator tools.
  • sdo.sample contains sample sdo code.
  • sdo.plugin contains code to configure the way in which SDO is build by maven.

The main source code in each of these subprojects is located in the directory src/main/java, and if applicable, test (example) classes are located in src/test/java. The directory src/test/resources contains any data files needed by the test programs.

sdo.spec

This project contains the interfaces provided with the SDO 2 specification. It is essentially an unzipped copy of the SDO Java API sources zip file available at http://ftpna2.bea.com/pub/downloads/SDO_20_Source.zip, but with some errata corrections and a Tuscany-specific implementation of class HelperProvider.

The abstract class, HelperProvider, is used to obtain specific default helpers and other implementation-specific objects used by the Java implementation of SDO. In the Tuscany implementation of this class, there are two ways to specify the implementation of the HelperProvider class.

Set a System Property named "commonj.sdo.impl.HelperProvider" equal to the fully qualified class name of the implementation class (e.g. "commonj.sdo.impl.HelperProvider=org.apache.tuscany.sdo.help.HelperProviderImpl").

In your own jar file, create a text file called "META-INF/services/commonj.sdo.impl.HelperProvider". In this text file, specify the fully qualified custom HelperProvider implementation class (e.g. org.apache.tuscany.sdo.help.HelperProviderImpl).

In the event that both 1 and 2 are specified, the System Property will take precedence over the text file.

The Tuscany default helper provider implementation class is org.apache.tuscany.sdo.helper.HelperProviderImpl (in the sdo.impl project) and is registered using the second technique (services file), as described in the following section.

sdo.impl

The sdo.impl subproject contains a test package under src/test/java (see the section below entitled Static Code Generator for details) and the following implementation packages under src/main/java:

package org.apache.tuscany.sdo

Contains a few interfaces used by some of the implementation classes in org.apache.tuscany.sdo.impl. (Note: this package is subject to further cleanup.)

package org.apache.tuscany.sdo.helper

This package contains implementations of the "helper" interfaces defined in the commonj.sdo.helper package (in the sdo.spec project). Each helper interface in commonj.sdo.helper has a corresponding implementation class in this package. The name of each helper class is the same as the corresponding interface, only with the suffix "Impl" appended. For example class org.apache.tuscany.sdo.helper.TypeHelperImpl implements the interface commonj.sdo.TypeHelper.

The implementation class org.apache.tuscany.sdo.helper.HelperProviderImpl is used to bootstrap an implementation of the default INSTANCEs of the SDO helper (see class commonj.sdo.impl.HelperProvider in sdo.spec). This implementation creates instances of the other helper implementation classes in this package and is registered using the services file src/main/resources/META-INF/services/commonj.sdo.impl.HelperProvider.

package org.apache.tuscany.sdo.impl

This package contains the majority of the SDO runtime implementation code. This includes implementations of all of the commonj.sdo interfaces (see sdo.spec), including several implementations of the DataObject interface. The design and implementation of the most important classes in this package are described below).

package org.apache.tuscany.sdo.util

Contains some utility classes used by the implementation. One class, SDOUtil, is particularly important. It provides some useful static utility functions which are not included in the SDO specification itself. Although these are not "standard" APIs, use of them is recommended, as opposed to resorting to low-level implementation-specific APIs. The intent of this class is to encapsulate, in a relatively clean way, common functions that are needed, and can potentially be proposed for addition to the specification in a future version of SDO.

sdo.tools

This project will contain (command line) tools, such as SDO model importers and generators (Java code, XML schema, etc.). Currently however, there is only a single tool, a Java code generator implemented in class org.apache.tuscany.sdo.generate.XSD2JavaGenerator. This generator can be used to generate static SDO data objects and is described in more detail in below.

The sdo.tools project also contains a test program and sample generated model located in src/test/java and src/test/resources respectively (see the tests section below for more details).

Dependent Jars

The sdo.impl project requires the following EMF (Eclipse Modeling Framework - www.eclipse.org/emf) runtime jars to build:

emf-common-2.2.1-SNAPSHOT.jar - some common framework utility and base classes
emf-ecore-2.2.1-SNAPSHOT.jar - the EMF core runtime implementation classes (the Ecore metamodel)
emf-ecore-change-2.2.1-SNAPSHOT.jar - the EMF change recorder and framework
emf-ecore-xmi-2.2.1-SNAPSHOT.jar - EMF's default XML (and XMI) serializer and loader
xsd-2.2.1-SNAPSHOT.jar - the XML Schema model

The sdo.tools project also requires the EMF code generator framework jars:

emf-codegen-2.2.1-SNAPSHOT.jar - template-based codegen framework (JET - Java Emitter Templates)
emf-codegen-ecore-2.2.1-SNAPSHOT.jar - the EMF code generator
emf-common-2.2.1-SNAPSHOT.jar - some common framework utility and base classes
emf-ecore-2.2.1-SNAPSHOT.jar - the EMF core runtime implementation classes (the Ecore metamodel)
emf-ecore-change-2.2.1-SNAPSHOT.jar - the EMF change recorder and framework
emf-ecore-xmi-2.2.1-SNAPSHOT.jar - EMF's default XML (and XMI) serializer and loader
xsd-2.2.1-SNAPSHOT.jar - the XML Schema model

These are simply Maven-friendly versions of corresponding jar files/plugins obtained from Eclipse. SNAPSHOT maps to an EMF weekly integration build (for example, I200602160000). Note that if you are building SDO for a released source code distribution then the dependency jars will not be snapshot jars, but will instead themselves be released versions of the dependencies.

Runtime Implementation

The primary SDO runtime implementation classes are located in the package org.apache.tuscany.sdo.impl and consist of the following:

  • DataObject implementation classes
  • Implementation of the SDO metamodel interfaces: Type and Property
  • ChangeSummary and DataGraph implementations

The implementation of the SDO runtime is based on and leverages the EMF runtime model (i.e., EObject and the Ecore metamodel - refer to documentation at www.eclipse.org/emf). It subclasses and specializes the Ecore metamodel, and provides its own DataObject-tuned implementation(s) of the EObject interface. The design is described in more detail in the following sections.

DataObject implementation classes

SDO provides several DataObject implementation classes as shown in the following diagram:

Class DataObjectImpl is the most important. It provides a complete base implementation of the SDO DataObject interface. It extends from the EMF base class BasicEObjectImpl, which provides the "scaffolding" needed to easily implement an EObject, but without allocating any storage itself.

DataObjectImpl provides the DataObject implementation while allocating only the minimum storage overhead needed to be a data object (e.g., container pointer and feature, change recorder). It does not, however, allocate any storage for the actual properties of the data object. It instead requires subclasses for this purpose. For example, statically generated SDOs (see the generator section below) directly or indirectly extend from this class, providing their own storage in generated instance variables.

The subclass, DynamicDataObjectImpl serves as a concrete implementation class for dynamic data objects. It is the default implementation class used when creating dynamic data objects using the DataFactory.create() method, for example. DynamicDataObjectImpl provides efficient data storage using a dynamically allocated settings array.

StoreDataObjectImpl and DynamicStoreDataObjectImpl provide a delegating implementations for DataObjects that implement their own storage management using a store (see EMF's EStore interface) implementation class. StoreDataObjectImpl is used in conjuction with the "-storePattern" generator option (see section 4), while DynamicStoreDataObjectImpl, as its name implies, is used for dynamic store-based instances.

Type and Property implementation classes

The SDO implementation provides three implementations of the interface Type, one for each of the following three kinds of types: classes, simple data types, and enumerations.

  • class ClassImpl extends EClassImpl implements Type
  • class DataTypeImpl extends EDataTypeImpl implements Type
  • class EnumImpl extends EEnumImpl implements Type

For example, class org.apache.tuscany.sdo.impl.ClassImpl extends form the corresponding Ecore class, EClassImpl, and mixes in the SDO interface commonj.sdo.Type. All the Type methods are implemented by calls to super.

With this approach, a data object's Type, returned from DataObjectImpl.getType(), and its EClass, returned by DataObjectImpl.eClass(), are the same underlying meta object. This allows the SDO implementation to leverage any appropriate base functionality without any performance overhead. The arrangement is shown in the following diagram:

The implementation of the SDO Property interface follows a similar pattern. Two implementation classes, subclasses of corresponding Ecore classes, mix in the Property interface:

  • class AttributeImpl extends EAttributeImpl implements Property
  • class ReferenceImpl extends EReferenceImpl implements Property

As with the Type implementation classes, these classes call methods on super to implement the mixed-in Property methods.

The following diagram illustrates the design:

As shown, the getProperties() method in ClassImpl (i.e., of the SDO Type interface) returns a set of properties whose implementation classes also implement EAttribute or EReference, and since ClassImpl, extends EClassImpl (as shown in the previous diagram), these are in fact the same objects as those returned by the EClass.getEAllStructuralFeatures() method. The two metamodels are one and the same, making the implementation of many of the SDO APIs trivial calls to the base class.

ChangeSummary and DataGraph implementation classes

TBD.

Static Code Generator

The SDO static code generator is a command line tool for generating Java source code (static SDOs) for DataObjects defined in an XML Schema. It is implemented by the class org.apache.tuscany.sdo.generate.XSD2JavaGenerator in the sdo.tools project. The generator is used as follows:

Usage arguments:

[ -targetDirectory <target-root-directory> ]
[ -javaPackage <base-package-name> ]
[ -prefix <prefix-string> ]
[ -sparsePattern | -storePattern ]
[ -noInterfaces ] [ -noContainment ] [ -noNotification ] [ -arrayAccessors ] [ -noUnsettable ] -noEMF
<xsd-file> | <wsdl-file>

For example:

java XSD2JavaGenerator somedir/somefile.xsd

Options:

-targetDirectory Generates the Java source code in the specified directory. By default, the code is generated in the same directory as the input xsd or wsdl file.

-javaPackage Overrides the Java package for the generated classes. If not specified, a default package or one specified with an sdoJava:package annotation on the <schema> element in the xsd file (see SDO specification for details) is used for the java package.

-prefix Specifies the prefix string to use for naming the generated factory. For example "-prefix Foo" will result in a factory interface with the name "FooFactory".

-sparsePattern For SDO metamodels that have classes with many properties of which only a few are typically set at runtime, this option can be used to produce a space-optimized implementation (at the expense of speed).

-storePattern This option can be used to generate static classes that work with a Store-based DataObject implementation. It changes the generator pattern to generate accessors which delegate to the reflective methods (as opposed to the other way around) and changes the DataObject base class to org.apache.tuscany.sdo.impl.StoreDataObjectImpl. Note that this option generates classes that require a Store implementation to be provided before they can be run.

-noInterfaces By default, each DataObject generates both a Java interface and a corresponding implementation class. If an SDO metamodel does not use multiple inheritance (which is always the case for XML Schema derived models), then this option can be used to eliminate the interface and to generate only an implementation class.

-noNotification This option eliminates all change notification overhead in the generated classes. Changes to DataObjects generated using this option cannot be recorded, and consequently the classes cannot be used with an SDO ChangeSummary or DataGraph.

-noContainment Turns off container management for containment properties. DataObject.getContainer() will always return null for data objects generated with this option, even if a containment reference is set. Setting a containment reference will also not automatically remove the target object from its previous container, if it had one, so it will need to be explicitly removed by the client. Use of this option is only recommended for scenarios where this kind of container movement/management is not necessary.

-arrayAccessors Generates Java array getters/setters for multiplicity-many properties. With this option, the set of "standard" JavaBean array accessor methods (e.g., Foo[] getFoo(), Foo getFoo(int), int getFooLength(), setFoo(Foo[]), and void setFoo(int, Foo)) are generated. The normal List-returning accessor is renamed with the suffix "List" (e.g., List getFooList()). The array returned by the generated method is not a copy, but instead a pointer to the underlying storage array, so directly modifying it can have undesirable consequences and should be avoided.

-noUnsettable By default, some XML constructs result in SDO property implementations that maintain additional state information to record when the property has been set to the "default value", as opposed to being truly unset (see DataObject.isSet() and DataObject.unset()). The SDO specification allows an implementation to choose to provide this behavior or not. With this option, all generated properties will not record their unset state. The generated isSet() methods simply returns whether the current value is equal to the property's "default value".

-noEMF By default, the generated java implementation source files directly import the Eclipse EMF classes which they depend upon. This can lead to a discrepancy in EMF library level dependencies between the generated classes and the environment into which they are deployed. The -noEmf option provides an early level of function to avoid this situation. Classes generated using this option access EMF function indirectly via inherited behaviour, thereby allowing packaging of these generated classes into jar files which do not directly depend on EMF.

This early implementation of this option is limited in the subset of XML Schema it is known to handle, and is subject to change. The generator is known to be able to deal with Complex content (including content models which map to SDO Sequence), and Mixed content for example .

<xsd:complexType mixed="true" name="Sequence">
<xsd:sequence>
<xsd:choice maxOccurs="unbounded" minOccurs="0">
<xsd:element name="a" type="xsd:string" />
<xsd:element name="b" type="xsd:int" />
</xsd:choice>
<xsd:element name="split" type="xsd:string" />
<xsd:choice maxOccurs="unbounded" minOccurs="0">
<xsd:element name="y" type="xsd:string" />
<xsd:element name="z" type="xsd:int" />
</xsd:choice>
</xsd:sequence>
</xsd:complexType>
Generator Patterns

The DataObject interface generation pattern is as described in the SDO specification (see Java Interface Specification section). The SDO specification does not define a factory pattern for efficient construction of static SDOs, which is however provided by the Tuscany implementation. The generated SDO Factory interface conforms to the following pattern:

public interface <prefix>Factory {
  <Type1> create<Type1>();
  <Type2> create<Type2>();
  ...
  <prefix>Factory INSTANCE = <default_factory_impl>;
}

A generated factory corresponds to an SDO Type namespace uri (see commonj.sdo.Type.getURI) with one create() method for each SDO Type in the namespace. The <prefix> of the factory name is derived from the uri. An instance of the factory is available using the INSTANCE field in the interface.

Using the static factory, a DataObject might be created as follows:

Quote aQuote = StockFactory.INSTANCE.createQuote();
... // do something with aQuote
The generated implementation of each create() method simply constructs an instance of the corresponding type like this:

  public Quote createQuote() {
    QuoteImpl quote = new QuoteImpl();
    return quote;
  }

In addition to these generated type-specific create<Type>() methods, the generated factory implementation class also includes a generated reflective create() method that, given an SDO Type, efficiently dispatches to the correct type-specific create() method. The reflective create() method is called by the implementation of the SDO commonj.sdo.helper.DataFactory interface.

Test/Example Programs

The SDO project does not include any proper sample programs at this time (any volunteers?) but it does include a number of JUnit test cases, some of which serve as good examples of how to use SDO APIs to perform various tasks.

The following tests are particularly good SDO examples included in the sdo.impl project:

SimpleDynamicTestCase This program uses the SDO XSDHelper.define() method to register a simple XML Schema based model (simple.xsd). It then instantiates a DataObject instance (type Quote), initializes several of its properties, and then serializes the instance to an XML stream.

MixedTypeTestCase This program shows how to uses the Sequence API to create an XML instance which mixes arbitrary text within the DataObject's XML structure. It uses the XML schema complexType (MixedQuote) in mixed.xsd to define the SDO model.

OpenTypeTestCase Uses an XML Schema complexType with a wildcard (xsd:any) to illustrate how to work with and manipulate an SDO open type. The type OpenQuote in open.xsd is used for this example.

SimpleCopyTestCase Uses the SDO CopyHelper to create shallow and deep copies of the simple Quote model from SimpleDynamicTest.

SimpleEqualityTestCase Uses the SDO EqualityHelper to perform deep and shallow equality checks.

ChangeSummaryTestCase Creates a data graph with an instance of type Quote (in simple.xsd) as the root object. It then turns on change logging and makes a number of changes to the graph. Finally, it turns off change logging and serializes the data graph.

XSDHelperTestCase This program shows how the XSDHelper.define() method can be called multiple times with the same schema. The second (and subsequent) call simply returns an empty list since no new types are defined.

The following is in the sdo.tools project:

SimpleStaticTestCase - This test performs the same function as SimpleDynamicTestCase, above, only using a generated version of the simple.xsd model. The generated model has been pre-generated (with default options) in the directory src/test, but it can be regenerated using the XSD2JavaGenerator, possibly with different generator options (e.g., -noInterfaces or -sparsePattern), if desired.

StaticSequenceNoEmfTest This test exercises the -noEMF generator option with a set of complex types, focussing on Sequenced behaviour in the generated classes. The generated model has been pre-generated (with options -noEMF -javaPackage com.example.noemf.sequences) in the directory src/test, but it can be regenerated using the XSD2JavaGenerator, possibly with different generator options (e.g., -noInterfaces or -sparsePattern), if desired.

  • No labels