You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

This page describes the tools that need to be manually downloaded, built and installed on a system used to build Trafodion. The location of the tools is configurable and can be specified in the Trafodion configuration file. The Trafodion configuration file template is located in <Trafodion download directory>/apache-trafodion-1.3.0-incubating/core/sqf/LocalSettingsTemplate.sh. Following the directory structure shown in the template file makes it easier to specify the location of these tools for the build. This means you will only need to set the TOOLSDIR environment variable to the value of the common parent directory before building Trafodion.

Several tools need to be downloaded, built, and installed.   They include:

  • MPICH – This tools in an implementation of the Message Passing Interface (MPI) standard.  For use in Trafodion, MPICH must be built to force sockets to be used in both internode and intranode message passing.
  • Bison – This tools is a general-purpose parser generator.
  • Udis86 – this tool is a minimalistic disassembler library (libudis86) for the x86 class of instruction set architectures.
  • LLVM is a collection of modular and reusable compiler and toolchain technologies.
  • ICU is a setup of C/C++ and Java libraries providing Unicode and Globalization support for software applications.
  • Zookeeper – is a coordination service for distributed applications.  It exposes common services such as naming, configuration management, synchronization, and group services.
  • Thrift – is a communications and data serialization tool
  • Maven: Build tool that is only installed if compatible version does not exist

Apache Trafodion supplies a script that uses wget to download the appropriate tar file, builds, and installs the required tool into a directory of your choice for each of these tools.  However, if one or more of these tools are already installed in your environment or if you want to verify the download location before accepting software, you can install each tool separately.

To install all the tools using the Trafodion provided script, go to "Install tools using traf_tools_setup.sh".

To install each tool individually, go to "Install tools manually"

Install tools using traf_tools_setup.sh

Apache Trafodion provides a script called 'traf_tools_setup.sh' that installs each of these tools for you.  This script uses the wget to download the software into a download location, builds the product and installs it into an install directory. This script can be modified to meet the needs of your environment. For example, if you already have Zoopkeeper installed, you may not want to re-install it.

You may need root or SUDO access to install tools in desired location

In the sections below, the <Trafodion installation directory> is the root directory where the Trafodion source has been installed.  If you have not yet downloaded Trafodion source, please do it now.

    cd <Trafodion download directory>

    cd apache-trafodion-1.3.0-incubating/install

In this directory, there is a script called 'traf_tools_setup'.

    ./traf_tools_setup.sh -h

    Usage: ./traf_tools_setup.sh -d <downloaddir> -i <installdir> 

     -d <downloaddir> - location of download directory (a temp directory that can be deleted later)

     -i <installdir>  - location of install directory ($TOOLSDIR)

     -v               - verbose mode

     -h - help

    example: traf_tools_setup.sh -d /home/userx/download -i /home/userx/tools

Execute 'traf_tools_setup.sh' to install all dependent tools. Note: Don't move the install directory later.

Install tools manually

In the sections below, the <tool installation directory> is the directory where you want the tool to be installed.  

MPICH

Trafodion has been built and tested with version 3.0.4 of MPICH. The source tar file can be downloaded from  http://www.mpich.org/static/downloads/3.0.4/mpich-3.0.4.tar.gz (http://www.mpich.org/downloads). Save the mpich-3.0.4.tar.gz file to your build system and then perform the following commands.

tar -xzf mpich-3.0.4.tar.gz
cd mpich-3.0.4
./configure --prefix=<tool installation directory>/dest-mpich-3.0.4 --with-device=ch3:sock --disable-f77 --disable-fc 
make
make check
make install

 

Note: <tool installation directory> is the directory where you want MPICH to be installed. If you do not specify the --prefix option, the default location is /usr/local. For more detailed instructions, see the README file that comes with the source.

Bison

Trafodion has been built and tested with version 3.0. To determine if Bison is installed and is compatible:

 

    which bison

    bison --version

 

If a version older than 3.0 is returned, please download a later version. The source tar file can be downloaded from http://ftp.gnu.org/gnu/bison/bison-3.0.tar.gz (http://ftp.gnu.org/gnu/bison/). Save the bison-3.0.tar.gz file to your build system and then perform the following commands. 

tar -xzf bison-3.0.tar.gz
cd bison-3.0
./configure --prefix=<tool installation directory>/bison_3_linux
make
make check
make install

 

Note:  the " make check" step may return errors like the following that can be ignored:

make[3]: Entering directory `<mydir>/bison-3.0'

  YACC     examples/calc++/calc++-parser.stamp

  CXX      examples/calc++/examples_calc___calc__-calc++-driver.o

  LEX      examples/calc++/calc++-scanner.cc

  CXX      examples/calc++/examples_calc___calc__-calc++-scanner.o

g++: ./examples/calc++/calc++-scanner.cc: No such file or directory

g++: no input file

Adjust your PATH if necessary to make sure the correct version is chosen:

    which bison

    bison – version

Note: For more detailed instructions, see the INSTALL file that comes with the source.

Udis86

 

Trafodion has been built and tested with version 1.7.2. The source tar file can be downloaded from http://sourceforge.net/projects/udis86/files/udis86/1.7/udis86-1.7.2.tar.gz (http://udis86.sourceforge.net).  Udis86 is a prerequisite to building the LLVM product. 

 

tar xzf udis86-1.7.2.tar.gz
cd udis86-1.7.2
./configure --prefix=<tool installation directory>/udis86-1.7.2 --enable-shared
make
make install

 

LLVM

 

Trafodion has been built and tested with version 3.2. Note: Udis86 must be installed on the system before LLVM is built and installed. Trafodion uses a debug build of LLVM for its debug build and a release build of LLVM for its release build. The instructions below are for building both flavors of LLVM, release and debug. The source tar files for LLVM can be downloaded from http://llvm.org/releases/3.2/llvm-3.2.src.tar.gz (http://llvm.org/releases/download.html). Building LLVM takes some time to complete.

 

<TDB -  LLVM is available from Yum, can this be used?>


  # Set BASE_DIR to the top-level directory where the LLVM source will be 
  # unpacked and the objects compiled.
  BASE_DIR=<your-base-dir>
  cd $BASE_DIR
  tar xzf llvm-3.2.src.tar.gz
  
  export MY_UDIS_INSTALL_DIR=<udis-installation-directory>/udis86-1.7.2
  export MY_LLVM_INSTALL_DIR=<llvm-installation-directory>/dest-llvm-3.2/
  export MY_LLVM_SRC_DIR=$BASE_DIR/llvm-3.2.src
  export MY_LLVM_OBJ_DIR=$BASE_DIR/llvm-3.2.obj/
  export LD_LIBRARY_PATH=$MY_UDIS_INSTALL_DIR/lib:$LD_LIBRARY_PATH
  export C_INCLUDE_PATH=$MY_UDIS_INSTALL_DIR/include
  export CPATH=$MY_UDIS_INSTALL_DIR/include

  mkdir -p $MY_LLVM_OBJ_DIR/release
  cd $MY_LLVM_OBJ_DIR/release

  $MY_LLVM_SRC_DIR/configure --prefix=$MY_LLVM_INSTALL_DIR/release \
   --enable-optimized --enable-jit \
   --enable-shared --enable-targets=x86,x86_64,cpp \
   --with-udis86=$MY_UDIS_INSTALL_DIR/lib \
   CFLAGS=-fgnu89-inline

  make libs-only
  make install-libs

  mkdir -p $MY_LLVM_OBJ_DIR/debug
  cd $MY_LLVM_OBJ_DIR/debug

  $MY_LLVM_SRC_DIR/configure --prefix=$MY_LLVM_INSTALL_DIR/debug \
   --enable-optimized --enable-jit \
   --enable-debug-runtime --enable-debug-symbols \
   --enable-shared --enable-targets=x86,x86_64,cpp \
   --with-udis86=$MY_UDIS_INSTALL_DIR/lib \
   CFLAGS=-fgnu89-inline

  make libs-only
  make install-libs

 

ICU

 

ITrafodion has been built and tested with version 4.4.0. The source tar filecan be downloaded from http://download.icu-project.org/files/icu4c/4.4/icu4c-4_4-src.tgz (http://site.icu-project.org/download.

 

tar -xzf icu4c-4_4-src.tgz
cd icu/source
./runConfigureICU Linux --with-library-suffix=Nv44 --prefix=<tool installation directory>/icu4.4/linux64
make && make check
make install

 

You may see the following errors from make check that can be ignored:

[All tests passed successfully...]

Elapsed Time: 00:00:12.126

make[2]: Leaving directory `/home/centos/icu/source/test/cintltst'

---------------

ALL TESTS SUMMARY:

ok:  testdata iotest cintltst

===== ERRS:  intltest

make[1]: *** [check-recursive] Error 1

make[1]: Leaving directory `/home/centos/icu/source/test'

make: *** [check-recursive] Error 2

Zookeeper

Trafodion has been built and tested with version 3.4.5. Download a recent stable version of Zookeeper from https://archive.apache.org/dist/zookeeper/zookeeper-3.4.5/zookeeper-3.4.5.tar.gz.

 

 tar -xzf zookeeper-3.4.5.tar.gz
 cd zookeeper-3.4.5/src/c
 ./configure --prefix=<tool installation directory>/zookeeper-3.4.5
 make
 make install 

Thrift

 

Thrift is a communication and data serialization tool. Download source from http://archive.apache.org/dist/thrift/0.9.0/. Behind a firewall, you may need the ant flags to specify a proxy. 

tar -xzf thrift-0.9.0.tar.gz
cd thrift-0.9.0
./configure --prefix=<tool installation dir>/thrift-0.9.0 --without-qt 
make
make install

 Maven

Maven is a build tool.  Download source from http://archive.apache.org/dist/maven/maven-3/3.3.3/binaries/apache-maven-3.3.3-bin.tar.gz.

tar -xzf apache-maven-3.3.3-bin.tar.gz -C <tool installation directory>

Please add Maven to your PATH.


  • No labels