This page describes the tools that need to be manually downloaded, built and installed on a system used to build Trafodion.
The location of the tools is configurable and can be specified in the Trafodion configuration file. The Trafodion configuration file template is located in:
<Trafodion download directory>/incubator-trafodion/core/sqf/LocalSettingsTemplate.sh.
Following the directory structure shown in the template file makes it easier to specify the location of these tools for the build. This means you will only need to set the TOOLSDIR environment variable to the value of the common parent directory before building Trafodion.
Several tools need to be downloaded, built, and installed:
Tool | Description |
---|---|
MPICH | An implementation of the Message Passing Interface (MPI) standard. For use in Trafodion, MPICH must be built to force sockets to be used in both internode and intranode message passing. |
Bison | General-purpose parser generator. |
Udis86 | Minimalistic disassembler library (libudis86) for the x86 class of instruction set architectures. |
LLVM | Collection of modular and reusable compiler and toolchain technologies. |
ICU | Setup of C/C++ and Java libraries providing Unicode and Globalization support for software applications. |
Zookeeper | Coordination service for distributed applications. It exposes common services such as naming, configuration management, synchronization, and group services. |
Thrift | Communications and data serialization tool. |
Maven | Build tool that is only installed if compatible version does not exist. |
You can install these tools using one of the following methods:
- traf_tools_setup.sh installation: a script that uses wget to download the appropriate tar file, builds, and installs the required tool into a directory of your choice for each tool listed above.
- Manual installation: if one or more of these tools are already installed in your environment or if you want to verify the download location before accepting software, then you can install each tool separately.
traf_tools_setup.sh Installation
You may want to modify traf_tools_setup.sh for your specific environment. Example: if you already have Zoopkeeper installed, you may not want to re-install it.
You may need root or sudo access to installs the tools in desired locations.
In the sections below, incubator-trafodion represents the root directory where you installed the Trafodion source. (If you have not yet downloaded Trafodion source, please do so now.)
cd incubator-trafodion.install ./traf_tools_setup.sh -h Usage: ./traf_tools_setup.sh -d <downloaddir> -i <installdir> -d <downloaddir> - location of download directory -i <installdir> - location of install directory -h - help example: traf_tools_setup.sh -d /home/userx/download -i /home/userx/tools
Run traf_tools_setup.sh to install all dependent tools.
Don't move the install directory later.
Manual Install
In the sections below, the <tool installation directory> is the directory where you want the tool to be installed.
MPICH
Trafodion has been built and tested with version 3.0.4 of MPICH. The source tar file can be downloaded from http://www.mpich.org/static/downloads/3.0.4/mpich-3.0.4.tar.gz (http://www.mpich.org/downloads). Save the mpich-3.0.4.tar.gz file to your build system and then perform the following commands.
tar -xzf mpich-3.0.4.tar.gz cd mpich-3.0.4 ./configure --prefix=<tool installation directory>/dest-mpich-3.0.4 --with-device=ch3:sock --disable-f77 --disable-fc make make check make install
<tool installation directory> is the directory where you want MPICH to be installed. If you do not specify the --prefix option, the default location is /usr/local. For more detailed instructions, see the README file that comes with the source.
Bison
Trafodion has been built and tested with version 3.0. Use the following command tTo determine if Bison is installed and is compatible:
which bison bison --version
If a version older than 3.0 is returned, please download a later version. The source tar file can be downloaded from http://ftp.gnu.org/gnu/bison/bison-3.0.tar.gz (http://ftp.gnu.org/gnu/bison/). Save the bison-3.0.tar.gz file to your build system and then perform the following commands:
tar -xzf bison-3.0.tar.gz cd bison-3.0 ./configure --prefix=<tool installation directory>/bison_3_linux make make check make install
The make check step may return errors like the following that can be ignored:
make[3]: Entering directory `<mydir>/bison-3.0'
YACC examples/calc++/calc++-parser.stamp
CXX examples/calc++/examples_calc___calc__-calc++-driver.o
LEX examples/calc++/calc++-scanner.cc
CXX examples/calc++/examples_calc___calc__-calc++-scanner.o
g++: ./examples/calc++/calc++-scanner.cc: No such file or directory
g++: no input file
Adjust your PATH if necessary to make sure the correct version is chosen.
which bison bison --version
Refer to the bison INSTALL file for detailed instructions.
Udis86
Trafodion has been built and tested with version 1.7.2. The source tar file can be downloaded from http://sourceforge.net/projects/udis86/files/udis86/1.7/udis86-1.7.2.tar.gz (http://udis86.sourceforge.net). Udis86 is a prerequisite to building the LLVM product.
tar xzf udis86-1.7.2.tar.gz cd udis86-1.7.2 ./configure --prefix=<tool installation directory>/udis86-1.7.2 --enable-shared make make install
LLVM
Trafodion has been built and tested with version 3.2. Note: Udis86 must be installed on the system before LLVM is built and installed. Trafodion uses a debug build of LLVM for its debug build and a release build of LLVM for its release build. The instructions below are for building both flavors of LLVM, release and debug. The source tar files for LLVM can be downloaded from http://llvm.org/releases/3.2/llvm-3.2.src.tar.gz (http://llvm.org/releases/download.html). Building LLVM takes some time to complete.
<TDB - LLVM is available from Yum, can this be used?>
# Set BASE_DIR to the top-level directory where the LLVM source will be # unpacked and the objects compiled. BASE_DIR=<your-base-dir> cd $BASE_DIR tar xzf llvm-3.2.src.tar.gz export MY_UDIS_INSTALL_DIR=<udis-installation-directory>/udis86-1.7.2 export MY_LLVM_INSTALL_DIR=<llvm-installation-directory>/dest-llvm-3.2/ export MY_LLVM_SRC_DIR=$BASE_DIR/llvm-3.2.src export MY_LLVM_OBJ_DIR=$BASE_DIR/llvm-3.2.obj/ export LD_LIBRARY_PATH=$MY_UDIS_INSTALL_DIR/lib:$LD_LIBRARY_PATH export C_INCLUDE_PATH=$MY_UDIS_INSTALL_DIR/include export CPATH=$MY_UDIS_INSTALL_DIR/include mkdir -p $MY_LLVM_OBJ_DIR/release cd $MY_LLVM_OBJ_DIR/release $MY_LLVM_SRC_DIR/configure --prefix=$MY_LLVM_INSTALL_DIR/release \ --enable-optimized --enable-jit \ --enable-shared --enable-targets=x86,x86_64,cpp \ --with-udis86=$MY_UDIS_INSTALL_DIR/lib \ CFLAGS=-fgnu89-inline make libs-only make install-libs mkdir -p $MY_LLVM_OBJ_DIR/debug cd $MY_LLVM_OBJ_DIR/debug $MY_LLVM_SRC_DIR/configure --prefix=$MY_LLVM_INSTALL_DIR/debug \ --enable-optimized --enable-jit \ --enable-debug-runtime --enable-debug-symbols \ --enable-shared --enable-targets=x86,x86_64,cpp \ --with-udis86=$MY_UDIS_INSTALL_DIR/lib \ CFLAGS=-fgnu89-inline make libs-only make install-libs
ICU
ITrafodion has been built and tested with version 4.4.0. The source tar filecan be downloaded from http://download.icu-project.org/files/icu4c/4.4/icu4c-4_4-src.tgz (http://site.icu-project.org/download.
tar -xzf icu4c-4_4-src.tgz cd icu/source ./runConfigureICU Linux --with-library-suffix=Nv44 --prefix=<tool installation directory>/icu4.4/linux64 make && make check make install
You may see the following errors from make check that can be ignored:
[All tests passed successfully...]
Elapsed Time: 00:00:12.126
make[2]: Leaving directory `/home/centos/icu/source/test/cintltst'
---------------
ALL TESTS SUMMARY:
ok: testdata iotest cintltst
===== ERRS: intltest
make[1]: *** [check-recursive] Error 1
make[1]: Leaving directory `/home/centos/icu/source/test'
make: *** [check-recursive] Error 2
Zookeeper
Trafodion has been built and tested with version 3.4.5. Download a recent stable version of Zookeeper from https://archive.apache.org/dist/zookeeper/zookeeper-3.4.5/zookeeper-3.4.5.tar.gz.
tar -xzf zookeeper-3.4.5.tar.gz
cd zookeeper-3.4.5/src/c
./configure --prefix=<tool installation directory>/zookeeper-3.4.5
make
make install
Thrift
Thrift is a communication and data serialization tool. Download source from http://archive.apache.org/dist/thrift/0.9.0/. Behind a firewall, you may need the ant flags to specify a proxy.
tar -xzf thrift-0.9.0.tar.gz cd thrift-0.9.0 ./configure --prefix=<tool installation dir>/thrift-0.9.0 --without-qt make make install
Maven
Maven is a build tool. Download source from http://archive.apache.org/dist/maven/maven-3/3.3.3/binaries/apache-maven-3.3.3-bin.tar.gz.
tar -xzf apache-maven-3.3.3-bin.tar.gz -C <tool installation directory>
Please add Maven to your PATH.